18

Need a Linux solution for looped slideshow from pictures in some folder. Pictures may be deleted and added, so it's a bonus if it doesn't stop/crash if currently shown picture is deleted.

18
+50

This is going to sound crazy, but it works (better than I expected even) and is not that hard to setup. The idea is to make your viewing program look at a single file and then have a command line process that copies each of your files in your directory to that file you view. I tested this with Geeqie and gthumb and it actually works pretty well. gthumb even can handle the image being updated every second and both supported the name of the file type being different from the actual file type (jpg, png, gif, etc).

So here is what you do:

  1. Make a directory with only your pictures in them.
  2. open a terminal window and change to the directory made in the previous step.
  3. Run this command, substituting 5 with however many seconds you want to wait in between updates.

    while true ; do for i in * ; do cp "$i" ~/slideshow.jpg ; echo $i ; sleep 5 ; done ; done
    
  4. Open gthumb and view the image in your home directory called slideshow.jpg, it should rotate the picture. You can make gthumb full screen now if you need to.

  5. Try adding and removing pictures from the picture directory. It won't actually update until its finished going through the whole directory each time, but it will update. The echo $i is in there just so you can see what picture it just copied into place each time.

When you are ready to stop the slideshow, you can press Ctrl-C in the terminal window.

1
  • 1
    Brilliant. It takes a genius to understand the simplicity.
    – iElectric
    Nov 20 '10 at 13:24
16

If you use Gnome desktop, then you can use its official image viewer program for slide shows:

eog --slide-show /path/to/picture_directory

With Eog pictures can be removed or added during the slide show. Actually, if you add picture during the slide show, it will be automatically included.

5
  • Sounds like an out of the box solution to me.
    – deltaray
    Nov 29 '10 at 20:41
  • 1
    Using this on my Raspberry Pi, I was not able to add or remove files without restarting the slideshow. Not a criticism, just FYI.
    – Butters
    Mar 25 '14 at 16:21
  • 1
    You clearly deserve a medal
    – Pitto
    Dec 1 '17 at 12:22
  • 1
    On Ubuntu 16.04 using XFCE desktop, this worked but, while most UI elements were polished (fade-in and out, etc), an unwelcome menu bar was visible at the top at all times, even in full-screen slideshow mode. This will not be acceptable for every use. May 6 '18 at 6:51
  • I second Butters, this did not work on Raspbian. The added pictures never show up, and removed pictures generate errors from EOG. Perhaps this is due to the fact I'm reading from a rclone'd folder (from Google drive), but either way it does not work in some circumstances. Oct 21 '20 at 17:45
8

From http://www.instructables.com/id/Easy-Raspberry-Pi-Based-ScreensaverSlideshow-for-E/

using feh

feh -Y -x -q -D 5 -B black -F -Z -z -r /media/

2
  • 1
    You also need to add the option -R seconds so that the file list is refreshed periodically.
    – famzah
    Dec 28 '18 at 21:15
  • You might also want to add --auto-rotate to rotate images correctly based on EXIF data. Oct 9 '19 at 10:40
4

Impressive does the job well, with (or without if you wish) transitions.

Slideshow in random (-X) order with 3 seconds delay (-a 3) and autoquit at the end (-Q) :

impressive -XQa3 *

It's worth noticing that it allows scripting, and is multiplatform.

The only drawback is that it currently crashes if there is a directory in the list of files.

2
  • 1
    awesome application! perfect for what I want to do!
    – warhansen
    Jun 19 '19 at 8:58
  • If only it allowed to auto-rotate images based on EXIF data. Did not find any option to do this. :( Oct 9 '19 at 10:48
2

I found fbi (frame buffer image viewer) quite useful- Simple command, something like :

fbi -noverbose -a -u -t 6 /home/user/location/*

More options available withfbi --help and can be installed, depending on distro with apt-get install fbi

4
  • Works great from tty command line.
    – Bobble
    Oct 19 '16 at 11:23
  • 1
    This doesn't work when run from yakuake: ioctl VT_GETSTATE: Inappropriate ioctl for device (not a linux console?)
    – Mitch
    May 19 '17 at 12:17
  • You'll probably have to specify a particular tty, using -T 2 for example to select tty2. You'll probably have to muck around with permissions after that. Apr 5 '18 at 18:27
  • Does not work from command line on current Raspbian with screen attached :( Also seems to be lacking EXIF-based auto-rotate feature (I read). Oct 20 '19 at 21:57
2

The best Linux solution for me is feh

sudo apt install feh
feh -rzsZFD 5 /home/my_folder

It has many options, in this case it will show recursively a random picture from my_folder (and its subfolders) every 5 seconds.

1

I looked at many different solutions to this problem, including fbi, feh, and more.

I ended up using pygame of all things. This may not be clean, ideal, or optimal, but it does the job, it provides quick changes between slides without a long dark space between (fbi does this if you needed it to exit and restart to vary the timing between slide changes as is my case). Nonetheless, it is running (tested, deployed) code. As an added advantage, this code appears to be impossible to break out of into a shell and appears to be safe to run from .bashrc on an autologin. (This is added safety on a system that has no keyboard).

If you change the slide list and/or timing in the configuration file, you'll need to restart the script for changes to take effect. If you just replace the existing slide files, the changes will be picked up at the next slide change.


import pygame
import sys
import time
import os
import re

# Initialize the display
#pygame.init()
os.environ['SDL_NOMOUSE'] = '1'
pygame.display.init()
pygame.mouse.set_visible(False)
size = (pygame.display.Info().current_w, pygame.display.Info().current_h)
black = 0, 0, 0

print("Obtained screen dimensions (", size, ")")

screen = pygame.display.set_mode(size, flags=pygame.HWSURFACE|pygame.DOUBLEBUF)

# Get the slide show data
LIST = open(os.environ['HOME']+"/data_dir/slide_order.txt","r")
slides = []
for line in LIST:
    line = line.rstrip('\r\n')
    if (re.match('^[\w\d\. ]+\t+\d+$', line)):
            (fn, duration) = re.split('\t+', line)
            duration = int(duration)
            print("Adding file:", fn, "for", duration, "seconds")
            slides.append([fn, duration])
LIST.close()

while True:
    for (index, values) in enumerate(slides):
        print("Retrieved (",values,") at index:",index)
        (fn, duration) = values
        print("Loading image")
        image = pygame.image.load(os.environ['HOME']+"/data_dir/"+fn)
        print("Scaling image")
        image = pygame.transform.scale(image, size)
        irect = image.get_rect()

        print("Clearing buffer")
        screen.fill(black)
        print("BLIT")
        screen.blit(image, irect)
        print("Display Image")
        pygame.display.flip()
        print("Sleeping...")
        time.sleep(duration)
        print("Awake")

sys.exit(0)

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.