If I have my PC setup with 2 monitors (for wide desktop, useful for web development), and my mac setup with multiple monitors - is there a KVM available that can support this?

It seems most of them only have one input / output for video per computer.

  • If you found @Arjan solution helpful, consider marking it as accepted answer. – Manuel Ferreria Aug 13 '09 at 13:57
  • @Manuel Yeah I know how it works - just giving other users some time to have a go at a better answer (if possible)! – alex Aug 13 '09 at 14:30

Yes, it exists: a short list at Multi-monitor KVM. I guess there will also be software solutions, where for example the PC would be a server for the screen as sent by the Mac.


I had a long and frustrating experience trying to get multi-monitor KVM to work properly. Here's a synopsis of my experiences:

  • I've ended up using two HP LP2065 monitors that have two DVI inputs and an old Belkin PS/2 KVM switch for the keyboard and mouse. The system still loses track of the keyboard and mouse occasionally. In order to fix this, I plug USB keyboards and mice directly into the Windows computer or ssh into the Linux computer and reboot it. Generally this happens about once every couple of months.

  • In the beginning I had two Viewsonic VP2030B monitors and a Matrox G450 card. The Matrox cards have good quality DACs and the Viewsonic monitors have a DSP that sharpens VGA signals. Picture quality was quite good and I used a pair of Belkin VGA/PS2 switches to flip between the computers. At one point I had four computers going off one of the monitors and two off the other one.

  • Later I had the bright spark of trying DVI with the Viewsonics. Unfortunately that monitor had a firmware bug where it would often lose track of the digital signal on the DVI. I bought two (quite expensive) Avocent DVI/USB KVM switches and some fairly expensive cabling. When the monitor lost the plot the KVM switch would assume there was no monitor connected and lose the plot too. Most of the time the Viewsonics would drop back to VGA mode if the process worked at all. Generally the whole lot would crap out every few days requiring about an hour of nitpicking fiddling to get it back up and running. Fail.

  • Then I replaced the Viewsonics with HP LP2065s, which don't have an edge-sharpening feature for analogue signals. The switches were still quite flaky and would default to analogue signals. Replacing the DVI-I cables with DVI-D only cables fixed the analogue problem but the setup is still quite unreliable. Similar issues persisted with a Startech and Gefen switches and firmware upgrades to all of the switches. Fail.

At that point, with nearly £1000 down the drain, I gave up on DVI KVM switches and have some serious reservations with recommending that people use them.

The current setup using two monitors with multiple inputs and just switching the monitors works fairly well - it loses the plot every few months rather than every few days. All that is needed for this is a single cheap switch like my old Belkin. One point to note is that USB handles keyboards and mice being unplugged and plugged back in much better than PS/2 does - I use a USB keyboard and mouse to rescue Windows machines if the KVM switch loses the plot.


I have 2 possible workarounds:

  • The first involves a DualHead2Go. Maybe you can add this between your KVM swith and your 2 monitors. I'm not sure this will work though.
  • Another option is to use a second (VGA or DVI only) switch. You could then connect one screen with your regular KVM where also your keyboard and mouse is attached. And attach your second screen to the VGA (or DVI) switch. This setup has an added advantage of being able to keep the second screen on your mac for instance (to see something) while working on your PC on the first screen.
  • I did use a second KVM switch for this at one point. - +1 – ConcernedOfTunbridgeWells Aug 13 '09 at 9:17
  • There's also the TripleHead2Go. It does the same thing as the DualHead2Go, but for three monitors. – Andrew Scagnelli Aug 13 '09 at 17:19
  • the DualHead2Go is not true multi-display - instead it creates one large display streached across multiple monitors. Dual-head KVM swtiches exist - see kvm-switches-online.com/4svdvi20bnd1.html – barrypicker Aug 19 '13 at 17:41

Blackbox make a range of KVMs for different monitor and peripheral configurations, including multiple monitors. More information can be found on the Blackbox website.


You can find just about anything you want in KVM's if you are willing to pay for it. However, if you are dealing with just two computers you may not even need a switch for the second monitor. For example, my second monitor has both DVI and VGA input. For a long time I used a DVI cable to connect to one computer and a VGA to the second one. I then just use a normal kvm for the primary monitor, so I can share the keyboard and mouse. Eventually though, I decided I wanted work, personal computer, and laptop to connect to both monitors. So I picked up a mechanical VGA switch for under $10 from a Hong Kong site for the second monitor. If you don't have extra cables sitting around, then it might be cheaper to buy a second KVM that includes cables. Just be aware if the kvm is USB powered, you'll need an extra slots to plug it in.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.