37

Is there a command line program that can send files to the recycle bin? This is on XP and Vista.

  • 2
    Other than 'del'? – pelms Aug 18 '09 at 16:50
  • 2
    Which OS are you using? – ChrisF Aug 18 '09 at 16:51
  • exited to add XP and Vista – justintime Aug 18 '09 at 16:59
  • 11
    @pelms del permanently deletes it, not moves it to the recycle bin. – MiffTheFox Aug 18 '09 at 17:02
  • 1
    Then you must think there is no reason to have the Bin at all. By your logic, why recycle files from Explorer instead of just deleting them permanently? You may not have seen a use, but they do exist. Just recently, I wanted to delete a pile of files from numerous folders, but wanted to double-check them before wiping them out. The only/easiest way to do it was to run a for loop from the command-prompt to send them to the bin, then I could see them all consolidated in one place to make sure that only the files I wanted to delete were in there and restore any incorrect files. – Synetech Oct 3 '12 at 0:32
29

CmdUtils has a utility called Recycle that does exactly that. [direct download]

More info:

To use the recycle command download the CmdUtils zip file and unzip the exe to your Windows folder. Adding them to the Windows folder would allow you to access the command globally without you having to specify the entire path to the executable. You can then start using the recycle command by typing in;

recycle filename.txt

You can also specify wildcards with the commands so typing in recycle *.txt will recycle any text files in the current directory. There is also a option to suppress the delete confirmation dialog by using the force flag with the command.

To delete a file without having to confirm is use the command

recycle –f filename.txt

The –f flag will tell the command to force a recycle without showing you the confirmation dialog.

19

If you have powershell installed:

$sh = new-object -comobject "Shell.Application"
$ns = $sh.Namespace(0).ParseName("PATH\TO\FILE\TO\DELETE")
$ns.InvokeVerb("delete")
  • 2
    +1 Any powershell solution will get my vote. I hope the next Windows replaces cmd.exe with PowerShell. – BinaryMisfit Aug 18 '09 at 17:31
  • 1
    I doubt that will happen for a very long time. :) – EBGreen Aug 18 '09 at 17:31
  • 1
    That is far too slow, especially if recycling a lot of files (e.g., the PS counterpart to for /r %i in (foobar.tmp) do recycle "%i"). – Synetech Oct 1 '12 at 2:40
  • 1
    @BinaryMisfit finally that happens with Windows 10 – phuclv Jan 18 '17 at 3:57
5

I've had this question for a long time -- I finally took the matters into my own hand and I rolled my own utility cmd-recycle

I took a look at Recycle.exe in CmdUtils. The thing about it is that it pops out the traditional "Are you sure" dialog when you recycle (which can be removed by adding the -f argument). My program just does it (since you can always undo) which I think is more suitable for scripting purposes.

  • I just ran it on Windows Server 2008R2 and it doesn't work. – dthree Mar 30 '16 at 20:49
4

There is no built-in way to do this, but there are third-party tools that can. I checked my program-dump folder and found a few options. They all work the same (e.g., recycle filename.ext), but they vary in performance, so it depends on what your needs are (e.g., are you recycling a lot of files?)

  • MaDdoG Software’s Recycle is fast and has no output, but can throw a mysterious not-found error
  • EasyTools’ DeleteXP is slow because it displays the progress to the console, but if you redirect it to nul, then it is the fastest and reliable
  • Chris Yuen’s cmd-recycle is slowest, even when redirecting the (poorly formatted) output to nul
3

Can use external utility:

nircmd moverecyclebin *.tmp

1

I tried various programs for moving a file(s) to the recycle bin, but was unsatisfied with them for various reasons.

The main problem most have is the lack of decent status or error messages. Some just fail silently, so you think the program recycled something but in fact didn't do anything at all!

To remedy this, I've written a command line utility called bin-it that moves the specified file(s) to the Windows recycle bin. It supports wildcards and provides full status and error reporting. If something goes wrong, you'll know about it!

It's completely free and can be downloaded from here as binit.zip:
http://www.akiwi.co.uk/utilities.html

  • I recommend you change the name. “Bin It” makes me think of something like an ASCII->binary conversion. – can-ned_food May 21 '18 at 17:35
1

Without using third party tools I don't believe there is a "command line way of sending files to the recycle bin". You can get the full path to recycle bin on a Windows 7-10 system like this:

::get current user sid
for /f "tokens=2" %%i in ('whoami /user /NH') do set UID=%%i
:: create full path to current user recycle bin in a variable
set recyclebin=%systemdrive%\$Recycle.Bin\%UID%

echo %recyclebin%

The problem is that if you just move a file in there it doesn't appear in the recycle bin. You will only be able to see it in a command prompt. The recycle bin is a special folder. The windows API method of moving items to the recycle bin renames the file and stores information about it in a proprietary info file or files depending on the version of the OS. The third party tools suggested in the answers above invoke these API methods that handle all of that for you.

Some more info here: https://dereknewton.com/2010/06/recycle-bin-forensics-in-windows-7-and-vista/

  • Welcome to Super User. Your answer seems to explain how to build the path to the currently logged on user's Recycle Bin, but it does not appear to explain how to use this information to send files to the recycle bin as requested by the OP. Please edit your post to include this last part. Thanks for contributing. – Twisty Impersonator Jan 18 '17 at 4:35
  • This has almost all the information you'd need to write your own, short of actually presenting you with one, except mentioning the INFO2 and $I data which you'd need to manipulate. – can-ned_food May 21 '18 at 16:55
  • Let me know when the answer includes a cmd.exe or wsh.exe script which does so, and then I'll upvote! :-) Well, i guess wsh isn't technically applicable to the question, but the question is rather vague. – can-ned_food May 21 '18 at 17:36
1

Without external programs - deleteJS.bat. It uses Shell.Application invoke verb method. usage is simple:

call deleteJS.bat c:\someFile.txt
call deleteJS.bat d:\someFolder
0

You can try RecycleIt. It will send files to the Windows Recycle Bin via command line.

EXAMPLE USAGE:

recycleIt.exe C:\temp\example.txt /quit

NOTE: You need to add the "/quit" or it will pop a window that stays open. This could be problematic for headless console sessions.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.