When Windows 7 is joined to a domain the option to automatically login is no longer available in the advanced User Management console. Since I am running a small home domain because of SharePoint and TFS, how would I go about enabling this setting?

The HowToGeek Article here covers it however the options are disabled when joined to a domain.

4 Answers 4


From : My Digital Life Article

  1. Click Start, click Run, type regedit, and then click OK. In Windows Vista/7, simply type regedit in Start Search and hit Enter.

  2. Navigate to the following registry key:

    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

  3. Double-click the DefaultUserName entry, type the user name to log on with, and then click OK.

    If DefaultUserName registry value name is not found, create a new String Value (REG_SZ) with value name as DefaultUserName.

  4. Double-click the DefaultPassword entry, type the password for the user account under the value data box, and then click OK.

    If there is no DefaultPassword value, create a new String Value (REG_SZ) with DefaultPassword as the value name.

    Note that if no DefaultPassword string is specified, Windows automatically changes the value of the AutoAdminLogon registry key from 1 (true) to 0 (false) to turn off the AutoAdminLogon feature.

  5. In Windows Vista/7, DefaultDomainName has to be specified as well, else Windows will prompt for invalid user name with the user name displayed as .\username. To do so, double click on DefaultDomainName, and specify the domain name of the user account. If it’s local user, specify local host name.

    If the DefaultDomainName does not exist, create a new String Value (REG_SZ) registry key with value name as DefaultDomainName.

  6. Double-click the AutoAdminLogon entry, type 1 in the Value Data box, and then click OK.

    If there is no AutoAdminLogon entry, create a new String Value (REG_SZ) with AutoAdminLogon as the value name.

  7. If it exists, delete the AutoLogonCount key.

  8. Also if it exists, delete the AutoLogonChecked key.

  9. Quit Registry Editor.

  10. Click Start, click Restart, and then click OK.

  • 1
    I can confirm this works with a Windows 7 VM joined to the domain. I have mild concerns about how accessible the password in the registry is: no privileges are required to read those keys; but the VM is used soley by me, so hopefully it isn't too serious.
    – jmtd
    Apr 6, 2011 at 14:20
  • @jmtd - working, and security best practices are two separate things! I would only recommend this for a kiosk/guest/similar account. Apr 6, 2011 at 15:30
  • 2
    On a kiosk, you should use Group Policy to disable registry access to prevent users from accessing the logon password. The setting is User Config\Admin Templates\System\Prevent Access to Registry Editing Tools.
    – Bacon Bits
    Apr 19, 2011 at 1:34
  • 2
    That's probably not the smartest way to do it. There are multiple ways to get at the registry without using regedit.exe. VBScript, PowerShell, the "reg" command, and probably more. I think it's a better idea to change the ACL on the registry key itself to prevent users from viewing it.
    – Tmdean
    Mar 19, 2015 at 22:16
  • 1
    ... To add to the little comment I made, if using this for a kios or similar, you would hopefully be using locked down software/a browser in kiosk mode or more so users wouldn't actually have access to the desktop... Mar 21, 2015 at 10:32

Further to William Hilsum's answer, this method does not require you to leave the password in plain text in the registry (although I am not sure how the authentication is actually stored).

Step 1

As a local administrator, tell Windows to allow admins to log on automatically.

In Regedit, browse to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon. If it is not there, create a new String Value called AutoAdminLogon Set this value to 1

Step 2

Tell Windows to remember the password for logging in.

In the run box, type control userpasswords2 Ensure your domain username is in the list, if not, add it. Untick (or tick and untick): Users must enter a user name and password to use this computer. Make sure your username is selected. Click Apply.

At this point, Windows should prompt for the password that will be used.

Step 3

Now head back to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon Ensure the following String Values are set, if not, set them:

  • DefaultUserName: Your domain username (without the domain prefix)
  • DefaultDomainName: Your domain

That should be it.

Note on password changes:

You will need to redo this procedure from step 2 each time you change your password. Unfortunately Windows resets the DefaultDomainName to your local machine name every time you save that dialogue, so you have to change it back manually.

  • It must have been SP1 of Windows 7 that got rid of the "userpasswords2" control panel applet. It doesn't seem to exist any more.
    – Josh M.
    Dec 12, 2012 at 15:31
  • 1
    It works for me on SP1. Have you run it from the Run box as instructed? It's not listed in the control panel - you have to run it manually. Dec 12, 2012 at 21:33
  • It could be that I'm on a domain and that control panel applet is not available in that case. Not sure why, but it doesn't come up. I've been using control userpasswords2 since 2003 or so. ;-)
    – Josh M.
    Dec 13, 2012 at 3:20
  • 2
    Just had a thought. As per the OP's link, did you also try netplwiz? Feb 1, 2013 at 6:38
  • 3
    I prefer this answer as the password doesn't seem to be stored in plaintext. Worked for me in a domain environment on Win7 SP1.
    – jmagnusson
    Feb 16, 2015 at 7:58

Further to @Adam Millerchip's answer, we can reduce the password-change effort to what it was prior to joining a domain, when we always had to run control userpasswords2 again every time to store the new password. Now we're on a domain, we can just run a batch file instead that runs control userpasswords2 and also restores our domain and username registry settings:


control userpasswords2
regedit /s WinLogonBit.reg


Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon]

And if the reason for wanting the auto-logon is to get startup programs running, we might still prefer the workstation to end up locked after power-up. If so, we can place a shortcut in the Startup folder with the following command:

C:\Windows\System32\rundll32.exe user32.dll,LockWorkStation

Maybe you can run this as a bat file or something:

REG ADD "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /v DefaultUserName /t REG_SZ /d YourUserNameHere /f
REG ADD "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /v DefaultPassword /t REG_SZ /d YourPasswordHere /f
REG ADD "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /v DefaultDomainName /t REG_SZ /d YourDomainHere /f
REG ADD "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /v AutoAdminLogon /t REG_SZ /d 1 /f

REG DELETE "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /v AutoLogonCount /f
REG DELETE "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /v AutoLogonChecked /f
  • 1
    What does this command do? Please explain and I’ll remove my downvote.
    – Joseph
    Jan 3, 2019 at 19:18
  • Welcome to SuperUser! You are posting to a question that was answered 9 years ago and by the votes it looks like that answer was very helpful. I'm not sure if your answer adds anything to this without further explanation of what this does. You will find that you will have a better experience if you take moment to take the Stack Overflow tour. If you follow the norms of the Stack Overflow community and approach it with an attitude of helping others too, it will serve you well.
    – Rey Juna
    Jan 3, 2019 at 19:19

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .