How do I figure out which /dev is a USB flash drive?

Question

I want to mount a USB drive, two of them and I need two different mount points. Unfortunately, the Linux kernel underwent a name change and I can't figure out which /dev location is the right one. Is there a way to look through dmesg or /proc or somewhere else to find out which device node is a USB drive.

(I'm using ArchLinux if that helps any.../dev/sda is the first hard drive, /dev/sr0 is a dvd drive, etc.)

edit: The USB drive is connected to a USB hub. I looked through dmesg and it says the hub was connected and it scanned for the 3 devices connected to it. Still can't see where my USB drive is though.

Answer 1

Easiest way: Look at the output of dmesg after connecting the USB device. It should show you what /dev node was assigned to it.

Answer 2

All of these are good suggestions, but the quickest and least verbose method is to just type the following in the terminal:

mount

which will give a list of all the mounted devices (this assumes the USB drive is mounted, which is usually the case with modern Linux distros).

Answer 3

As long as you are running udev, you can do this easily by referencing /dev/disk/by-id/usb-manufacturername_serialnumber. These appear as symbolic links which you can either directly reference within your fstab, or which you can dereference using readlink -e to determine the associated block device.

Here's a real world example. On my machine, I have 3 USB hard drives connected. These each show up in /dev/disk/by-id with unique serial numbers (although they share a common manufacturer string). I have created symbolic links to each of these three unique entries, and can now quickly determine which drive is which (and which device is associated with each drive) by running readlink -e linkname. For example, running readlink -e /root/disk2 on my machine currently displays "/dev/sde", while readlink -e /root/disk3 produces no output whatsoever.

Answer 4

Try the command udevinfo -q all -n /dev/sda, where /dev/sda is the path to your disk. This gives you a boatload of info about the disk you're looking at - there's an entry that tells you about the bus it's connected to.

This of course saves you from having to grep through dmesg and/or logs.

Update

udevadm info --query=all -n /dev/sda 

From at least Jul 2010 ^[1] udevinfo was substituted in Debian (and derived) by udevadm info with a little transient with which there were symlinks soon deprecated and removed (you can still found them in old not updated machine). Always from [1] we can read:

In udev 117, udevadm was introduced and udevinfo and other programs turned into compatibility symlinks. The symlinks were deprecated in udev 128 and removed for good in udev 147.

Answer 5

the simplest method to see what's going on is just typing (as root of course):

blkid -c /dev/null

this gives you a complete overview about all block devices even if not mounted

Answer 6

sudo fdisk -l

And just analyse the result.

Answer 7

Use

ls -l /dev/disk/by-id/usb*

Under the default udev rules, that will show you most usb devices and it will show you the symlink to their block-device name on the system.

If that doesn't work, look at /dev/disk/by-id/ directly.

Answer 8

/dev/disk/by-* is the easiest way in this case, if for some reason you want to make life more interesting you can use HAL.

To list all devices you use:

hal-device

To get a specific property you use (this will return /dev/sd* on a USB storage device):

hal-get-property --udi $UDI --key block.device

There is also:

hal-find-by-capability
hal-find-by-property

If you want to make it even more complicated you can relatively easy write yourself a HAL based auto mounter, which can be quite handy if you want to automate things completly.

And just for completeness there are also:

lsusb -v
lshw

Which provides some general information about USB and your hardware in general.

Answer 9

For USB devices you can simply do

REMOVABLE_DRIVES=""
for _device in /sys/block/*/device; do
    if echo $(readlink -f "$_device")|egrep -q "usb"; then
        _disk=$(echo "$_device" | cut -f4 -d/)
        REMOVABLE_DRIVES="$REMOVABLE_DRIVES $_disk"
    fi
done
echo Removable drives found: "$REMOVABLE_DRIVES"

Answer 10

Take a look at the tree under /dev/disk. It lists disks and their partitions (file systems) by various schemes.

Answer 11

/var/log/message if dmesg no longer has the information.

Answer 12

Based on the excellent answer from stormlash and with a dependency on udev to populate the "/dev/disk/by-id/usb" device tree, you could define a predicate (Bash) as follows:

is_usb_device() {
    local device_path=$1        # such as /dev/sdc
    for devlink in /dev/disk/by-id/usb*; do
        if [ "$(readlink -f "$devlink")" = "$device_path" ]; then
            return 0
        fi
    done
    return 1
}

And then use it:

if is_usb_device "/dev/sdg"; then
    echo "/dev/sdg is a usb device"
else
    echo "/dev/sdg is not a usb device"
fi

Answer 13

If you unplug the USB drive and plug it back in, you should see it initialize from the kernel (dmesg)