18

I'm currently trying to edit my hostname in a RedHat Enterprise Linux 6 virtual machine but I have some problem.

I tried using the function hostname like this:

hostname -v bravo.cmweb.com

And it works, I call the function and the hostname as been edited successfuly.

Then, I reboot the machine et then, oups, the hostname is again localhost.localdomain.

Now, I want to ask: how I can edit permanently the hostname in Linux??

3 Answers 3

32

You have to do a little bit more than using hostname. The following link below should solve your problem. Change your Hostname without Rebooting in RedHat Linux

Make sure you are logged in as root and move to /etc/sysconfig and open the network file in vi.

cd /etc/sysconfig
vi network

Look for the HOSTNAME line and replace it with the new hostname you want to use. In this example I want to replace localhost with redhat9.

HOSTNAME=redhat9

When you are done, save your changes and exit vi. Next we will edit the /etc/hosts file and set the new hostname.

vi /etc/hosts

In hosts, edit the line that has the old hostname and replace it with your new one.

192.168.1.110     redhat9

Save your changes and exit vi. The changes to /etc/hosts and /etc/sysconfig/network are necessary to make your changes persistent (in the event of an unscheduled reboot).

Now we use the hostname program to change the hostname that is currently set.

hostname redhat9

And run it again without any parameters to see if the hostname changed.

hostname

Finally we will restart the network to apply the changes we made to /etc/hosts and /etc/sysconfig/network.

service network restart
2

The hostname in a Red Hat system is configured in the file /etc/sysconfig/network.

Edit the file and add or edit a line such as this:

HOSTNAME="bravo.cmweb.com"
1

Follow this how to to change the hostname on RHEL 6 Server. Reboot is required for both options.

You can follow either the first option OR the second one.

  1. Modify /etc/sysconfig/network

    vi /etc/sysconfig/network
    
    NETWORKING=yes
    HOSTNAME=MyNewHostname.localdomain
    
    • Save and reboot your server.
  2. Type the following command to enter GUI mode.

    [root@localhost ~]# system-config-network
    
    • Go to “DNS Configuration”.
    • Modify your preferred hostname and click OK.
    • Click ” Save & Quit”.
    • Save and reboot your server.

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .