What is the easiest way to know my current DNS server's IP address or domain name? I am trying to troubleshoot my broadband Internet connection under Windows 7.

  • 2
    Do you mean Ip address? Or are you actual trying to find which name server you're connection is using? – vesquam Oct 12 '12 at 16:16
  • 1
    It sounds like this is your home system, which probably doesn't HAVE a domain. – Shinrai Oct 12 '12 at 16:37

If you know your public IP address simply enter in a command prompt window:

nslookup <your public IP>

You can also specify the name server to check against by appending it to the above command.

You can get your current IP address from sites like http://whatismyip.com

  • thats seems fine .. but there was some conflict :( pls see the photo i.stack.imgur.com/Ua6cT.png any solution? Thanks – rakib Oct 12 '12 at 16:27
  • @rakib Means there is no public DNS name for you, or your ISP doesn't give one – Canadian Luke Oct 12 '12 at 16:28
  • 1
    @rakib, please try running "ipconfig /all" as that will give you more details on the problem. You are essentially troubleshooting your internet connection, yes? – mrchampe Oct 12 '12 at 16:44
  • 6
    You can just nslookup anything. It doesn't have to be your own IP address. If you don't provide any parameters, the interactive shell will start and will display the active nameserver right at the top. – Der Hochstapler Oct 12 '12 at 17:26

You want to open "Run" then type


In the command prompt enter this command

C:\>ipconfig /all | findstr /R "DNS\ Servers"

The output should look something like:
enter image description here

  • That shows the DNS server, not the DNS name – Canadian Luke Oct 12 '12 at 16:29
  • 3
    Since he is troubleshooting his internet it seems he wants to verify he is connected to the ISP DNS server. It is unlikely he even has a DNS address, which is shown in the screenshot he shared – mrchampe Oct 12 '12 at 16:54
  • 3
    This should be the accepted answer, since it directly answers the user's question: "my current DNS server address..." However, on my Windows box the DNS Servers come as a group and not all of them are prefixed with the string. ipconfig /all works, though, if you eyeball it. – Mike S Dec 30 '15 at 19:01
  • The order printed is not necessarily the same as the order used. – jan-glx Sep 25 '20 at 7:39

Personally, I prefer this approach:

echo | nslookup | findstr "Default\ Server"

It will print the name of your default DNS server in the shell

  • 2
    actually a combination of the two answers gives the best result: echo exit | nslookup | findstr ":". Just using yours in PS prompts "Supply values for the following parameters: InputObject[0]:", while the other one prints unnecessary lines. – merosss Apr 11 '18 at 20:38
echo exit | nslookup

This will show the primary DNS server domain name and IP address.

Default Server:  google-public-dns-a.google.com


Thanks to @OliverSalzburg's answer.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.