I downloaded an ISO of Windows 7 Home Premium 64 bit From Digital River to try to restore a laptop.

I downloaded the ISO and burned it to a Memorex DVD and tried to boot the laptop from it using the boot options but the laptop acted like there was no disk in the drive and booted from the Hard Drive like normal.

I tried another boot disk to see if it was the DVD drive but the laptop booted to that disk just fine.

Am I burning this disk wrong? Any ideas?

Lenovo g570

  • If you look at the disc on an existing computer, what do you see on it?
    – John
    Dec 12, 2012 at 14:16
  • @john It has 5 folders labeled boot, efi, sources, support, and upgrade. Then it has 4 files, autorun.inf, bootmgr, bootmgr.efi, and setup.exe Dec 12, 2012 at 14:37
  • Please specify the application you use to burn the dvd.
    – pleinolijf
    Dec 12, 2012 at 14:38
  • @pleinolijf windows 7 burner Dec 12, 2012 at 14:39
  • @pleinolijf yes and I didnt find anything that gave me a clue as to what went wrong Dec 12, 2012 at 14:44

3 Answers 3


That's because you probably have not burned a boot sector or boot image on the DVD. The program you use to burn DVDs will have an option that you can check to burn a bootable DVD.

Judging from the screenshot on this page, it doesn't look like there's an option to burn a bootable disc in Windows Disk Image Burner.

If you can't do it with the built-in Win7 burner, these are two solid, free-to-use dvd burning programs, that might be more straightforward to use:

  • 2
    While hopefully this works, I have never had an issue burning any bootable media from W7 Burner. Though, it doesn't have speed controls and everything that the others have. @MalwareManiac - When you re-burn, try doing it with a slower speed with verification selected as well. Sounds like just a bad burn, lower speeds tend to help avoid those.
    – nerdwaller
    Dec 12, 2012 at 15:09
  • @nerdwaller you may be right cause my friend just yesterday made a bootable disk that worked just fine with the same burner Dec 12, 2012 at 15:11
  • @MalwareManiac - Yeah, it sometimes just fails or the DVD is just poor quality so the laser doesn't encode it right or whatever. Windows kind-of failed in having options in their burner (probably trying to make it simple). The ones pleinolijf mentions should give you the extra control to help ensure a better burn.
    – nerdwaller
    Dec 12, 2012 at 15:13
  • I used a different dvd and a different burner and it worked! Thanks for the help Dec 12, 2012 at 15:37
  • Yup, you just get bad discs or bad batches sometimes. I remember having used Windows to burn a setup DVD in a pinch and it booted just fine. However, I highly recommend ImgBurn.
    – Karan
    Dec 12, 2012 at 18:02

When I've had problems with a DVD that failed to boot (usually some flavor of Linux), it was because I failed to compare the published MD5 or SHA1 checksums.

  • Thks for your answer though that is not the case here because I used the same ISO with a different burner and disk and it worked just fine Dec 12, 2012 at 18:14

I had the same problem, but I burned about 10 dvd's to realize that I didn't download the right iso file from the net. Slower speeds tend to help avoid bad burning. You shoul try Daemon tools advanced pro - it has everything You need to make an image from about any file and burn it or emulate it or whatever.

  • Welcome to Super User! Please read How do I recommend software for some tips as to how you should go about recommending software. You should provide at least a link, some additional information about the software itself, and how it can be used to solve the problem in the question.
    – DavidPostill
    Dec 17, 2016 at 10:35

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .