I have a few PCs that are losing time and I'd like Windows to sync them more often with the Internet time. I think the Windows default attempts to update only once per day, and does not update if the time server is not available (which seems to happen quite often) meaning the PCs can end up 20 or 30 seconds out.

I'd like to create a scheduled task to do this say every 5 minutes and if the default time server is not available use mul


6 Answers 6


Folks, I got this running with windows built in w32tm and a scheduled task (see below).

First step was to config w32tm to use many different time servers (and also to log so we could see what was happening). Second step was to schedule w32tm in task scheduler. I liked this solutions as it didn't require any 3rd part tools. It is really important to set up the different time servers as I find quite often they don't respond.

Configure w32tm

Open Command prompt (Run the following as admin)

w32tm /config /manualpeerlist:"time.nist.gov time.windows.com time-nw.nist.gov time-a.nist.gov time-b.nist.gov time-a.timefreq.bldrdoc.gov time-b.timefreq.bldrdoc.gov time-c.timefreq.bldrdoc.gov utcnist.colorado.edu" /syncfromflags:manual /update

w32tm /query /configuration

Check to see the NTP server list is updated correctly ie it reflects the peer list you have just entered

w32tm /debug /enable /file:C:\windows\temp\w32time.log /size:10000000 /entries:300

Browse to directory and check to see the log has been created

Change system time manually(so that the time is now out of sync), then go back to command prompt and run the resync command

w32tm /resync

Check system time has been updated. **If you get an error about the time service not being started you can use the command net start w32time then try another resync

If you get the following error: The compter did not resync because the required time change was too big. then use this command to resync: w32tm /resync /force

If this works successfully then all you have to do is configure the following scheduled task to run as often as you want (it will use your peer list configured above).

Schedule w32tm

Program/Script Argument

%windir%\system32\sc.exe start w32time task_started
%windir%\system32\w32tm.exe /resync
  • 1
    By default, Windows Time gets updated time at least every 9.1 hours. This is controlled by the MaxPollInterval registry entry discussed at that link. This entry's data is converted to seconds with the formula 2^Value. e.g. If MaxPollInterval's value is 11, then 2^11=2048sec=34minutes. For those who want to reduce the update frequency without using a scheduled task, simply change this registry entry then restart the Windows Time Service with net stop w32time then net start w32time. Apr 14, 2017 at 21:35
  • 1
    "/entries:300" isn't the right option. It will only show entries logged with code #300, which isn't many entries at all. The idea is to use this parameter as a list of entry numbers to show, so "/entries:0-300" will show all of the possible events in the log.
    – MikeB
    Dec 11, 2019 at 15:09

Go to Control Panel > Administrative Tools > Task scheduler

left is an folder tree, expand: Task scheduler library > Microsoft > Windows > Time synchonization

right click the task: SynchronizeTime > properties

On the tab: Triggers you can add the triggers you want.

  • The OP asked for a time sync interval of 20-30s. This is only possible with the trick to define multiple triggers
    – nixda
    May 17, 2015 at 8:59
  • 2
    Common misconception, but you really can't be blamed! This scheduled task only ensures the Windows Time service is running... Thus, even if you trigger the task more often, it's still the service that decides when to synchronize, which apparently is weekly. Nov 14, 2015 at 8:54
  • 9
    To change poll frequency: registry key HKLM\SYSTEM\CurrentControlSet\services\W32Time\TimeProviders\NtpClient, edit DWORD SpecialPollInterval, in seconds (e.g. for one day: hexadecimal 15180 or decimal 86400). Nov 17, 2015 at 16:12
  • Great! this trick worked for me on my W7 OS
    – razor7
    Jun 15, 2016 at 0:16
  • 4
    Thanks Microsoft for making a simple sounding task such as time synchronization SO DAMN COMPLICATED. The only sane solution is to silently run a third-party utility on a regular basis. Apr 14, 2017 at 23:40

You can use TimeSync to automate time syncing.

  • upside: doesn't register a whole service like W32tm (which you have, when you use W32tm)

  • upside: its portable and can be run with /auto option from the startup folder

  • downside: third-party tool and not a build-in solution

    enter image description here

TimeSync gets the current time from a NIST server, and adjusts the PC clock if necessary. Accuracy is usually within a second. [...] TimeSync will try alternative servers, in case the time cannot be obtained from the preferred server.

Option /auto is provided to run TimeSync from the StartUp folder. In this mode the TimeSync window will not show if the clock offset is under a given minimum.

Of course you can still register the build-in solution W32tm with cmd.exe → W32tm /register and set up your scheduled task to call cmd.exe → W32tm /resync every 5 minutes.


You can also try this program: http://www.worldtimeserver.com/atomic-clock/ It allows you to change windows time service settings - the easy way.

Also forcing sync with it works, while the windows "update now" almost never works.

  • this worked perfectly thanks Nov 3, 2022 at 14:02

I run this command on kiosks that I manage.

net start w32time 
w32tm /resync /force

to manually set the date time:

date 5/24/2017
time 18:37:00

to Set the time zone:

tzutil/s Pacific Standard Time
  • 2
    What do the commands in the first code block do? Do the second and third code blocks have anything to do with this question? May 25, 2017 at 0:10

I think the correct answer to this question is to decrease the MaxPollInterval and MinPollInterval entry in the registry in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Config

These values are 2^MinPollInterval seconds. So if you want 5 minutes, you should set your MinPollInterval to 8 (2^8 = 256 seconds). Your MaxPollInterval, you can set it to w.e. you like, but 10 is the default for domain controllers (2^10 sec = 17 min). EDIT: After some testing, the MinPollInterval wasn't the time interval that was being used to do the time checks. This is an additional reference that might help others.

Also note that there are parameters that allow you to change how much time desynchronization is allowed (MaxAllowedPhaseOffset), and if a time synchronization has to happen, if it will happen gradually or instantaneously.

Note that you can set MaxAllowedPhaseOffset to 0 (seconds), which means that it will force a synchronization at every time check.

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .