I wanted to upgrade the memory in my Acer Aspire 5672wlmi. By default, there are 2 x 1GB DDR2 installed and I wanted to upgrade to 3GB, so I bought a 2GB DDR2 PC667.

When I replace one of the existing modules with the new one (1x1GB + 1x2GB), the PC won't boot anymore (screen stays dark). If I remove the existing 1GB module and only insert the new one, everything works fine.

So I see 2 possibilites:

  • The aspire 5670 series only support up to 2GB
  • I can not mix a 1GB and a 2GB module and therefore have to buy a second 2GB so I can upgrade do 2x2GB.

So my questions are:

  1. Which of the two assumptions is true?
  2. Does my notebook even support 4GB ?

Some further notes:

  • This question is very similar. It seems the solution was a BIOS reset. Maybe I have to try that for my notebook too? Here, they mention that mixed sticks worked fine on a similar model.
  • Crucial Memory adviser also shows a 4GB kit.

Thanks for any help

  • Well, guess I will never really find out as my dear old aspire decided to blow up it's graphics card today. RIP. – pgruetter Jan 27 '13 at 21:58

According to this CNet review, that model supports a maximum of 2GB of RAM.

  • Unfortunately, I found different answers to that. This pages for example mention 4GB maximum: fixya.com/support/… / mrmemory.co.uk/memory-ram-upgrades/model/…. So I don't know what to believe. – pgruetter Jan 18 '13 at 9:55
  • 1
    the reason you found a different answer is that you are looking at the wrong model. You say you have a "5672wlmi", but your link in the comment is to a "5672". They are not the same model. – Keltari Jan 18 '13 at 9:59
  • Ah, you're absolutely right. Anyway, same page also give 4GB for the wlmi model: mrmemory.co.uk/memory-ram-upgrades/model/… ;-) – pgruetter Jan 18 '13 at 10:02
  • interesting... still I would believe the evidence in front of you: more than 2 gb does not work. – Keltari Jan 18 '13 at 10:03
  • You're probably right. But since the pages have different opinions, I still have hope that a BIOS reset or a BIOS upgrade would help. Let's see if someone has experience with the exact model... – pgruetter Jan 18 '13 at 12:13

I have exactly the same model and recently i needed some extra ram for some processing. So i replaced its 2 x 1GB modules with 2 x 2GB ones from a Dell and computer started and worked ok, although BIOS can only see 3GB. So I guess 3GB is the limit.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.