I had 2x4GB DDR3 Kingston memory and recently decided to put twice as much. So i bought the same memory and put it in. Launched AIDA64 to just see what it shows, and saw something strange.
Although on all 4 memory modules it is clearly stated that they are Kingston HyperX KHX1600C9D3/4GX, AIDA64 (so do CPU-Z) reports as follows:

DIMM1: Kingston 9905403-198.A00LF
Memory Speed DDR3-1333 (667 MHz)

DIMM2: Kingston HyperX KHX1600C9D3/4GX
Memory Speed DDR3-1600 (800 MHz)

DIMM3: Kingston 9905403-198.A00LF
Memory Speed DDR3-1333 (667 MHz)

DIMM4: Kingston HyperX KHX1600C9D3/4GX
Memory Speed DDR3-1600 (800 MHz)

I have to admit that my motherboard does not support DDR3-1600 (Asus P8H67), but i'm curious why do they have different speeds if they all 4 are the same model.

Here are the print screens of the report:

http://easycaptures.com/5910181976 http://easycaptures.com/4714593375

P.S. The new memory is the one with 800Mhz, the old one is reported as DDR3-1333

  • 1
    If the RAM is all externally labelled Kingston HyperX KHX1600C9D3/4GX but CPU-Z is reporting 9905403-198.A00LF my guess would be the RAM is incorrectly labelled. Can you return the RAM for a new set? Apr 22, 2013 at 18:17
  • Yes all 4 sticks have the same label. Well, they have minor differences (like old ones have text "Genesis" in white, the new ones have the same text in black), but model on labels is the same. Do you think it is just wrong labeling? I guess i cannot return it, i do have them for almost a year :( Apr 22, 2013 at 18:21

2 Answers 2


Only buying a matched set guarantees the exact same specification and ideal compatibility. However, in your case I wouldn't worry too much about it since your modules look very similar, but from different batches/production dates.

In fact, a closer look at the XMP (Extreme Memory Profile) shows that both support 800mhz at 1.65v voltage and 9-9-9-27 timings (the lower the timings the faster the memory). This is the fastest speed your modules can go, but require a voltage increase. In general you need to manually select the "XMP" option in your BIOS to use it.

In order to run at 800mhz without increasing the voltage (default is 1.5v, as shown in your Module Voltage setting), you need to use slower timings -higher numbers- to compensate but only one of your module supports it officially: the one that includes a standard SPD profile for 800mhz using 11-11-11-28 timings.

But seeing that both modules requires the same timing at similar slower frequencies (SPD 667mhz and SPD 685 both run at 9-9-9-27), and that both have the same timings in the XMP profile, it is very likely that both your memory can run at the same speed (800mhz, 11-11-11-28) at regular voltage.

It is not guaranteed, but very likely. Of course, we don't know precisely why they added the SPD option in the newer module... Is it because they tested the option and decided to add it for consumers, or is it because they improved the production process and newer modules support it while older ones didn't? Hard to guess!

Note that the fastest speed BOTH your memory modules can go is using the XMP profile of 800mhz at 9-9-9-27 but this require increasing the voltage to 1.65.

Finally, the difference in real-world speed between 1333mhz (667) and 1600mhz (800), either at higher or lower timings is trivial. If you want to keep it simple, run them all at 667mhz, 1.5v and 9-9-9-27 and get on with your day.

  • that is what I see in the pictures also. Manually he could probably set the timings, and voltage, and get to the same place with both memories the same way. The chip itself has 1 less built-in data chunk to ID the timings (automatically) for the 800. Chances are good they can all run happily at the 800, manually timed for it. (and checked extensivly to be sure before running it that way using that memtest) memtest86.com/download.htm
    – Psycogeek
    Apr 22, 2013 at 20:24
  • Thanks! I have written to Kingston also, waiting for they reply. But your answer pretty much explains it. Apr 24, 2013 at 7:41

Modern RAM has a small ROM chip storing information about the RAM and its manufacturer (see SPD Data). The motherboard uses this information to configure the memory timings for each channel. Programs like CPU-Z can be used to view this data in the OS.

Sounds like your RAM was mislabelled if the SPD Data is reporting it as something different. If inside of a purchase window you could look into returning it.

Otherwise you could manually configure the BIOS to overclock the slower RAM, since right now it's probably just auto-configuring the settings. Here is one guide for overclocking RAM but there are lots of other ones on the web. Make sure you understand the options and settings before trying to overclock. Also note that the memory may not overclock. Test with programs like memtest and rollback if you notice strange errors.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge that you have read and understand our privacy policy and code of conduct.

Not the answer you're looking for? Browse other questions tagged or ask your own question.