To what extent is the size of an SSD a factor in its performance?

In my mind, correct me if I'm wrong, a bigger SSD should be, everything else being equal, faster than a smaller one. A bigger SSD would have more erase blocks and thus more leeway for the FTL (flash translation layer) to do garbage collection optimization. Also there would be more time before TRIM became necessary. I see on Wikipedia that it remarks that "The performance of the SSD can scale with the number of parallel NAND flash chips used in the device" so it seems throughput also increases significantly. Also many SSDs contain internal caches of some sort and presumably those caches are larger for correspondingly large SSDs.

But supposing this effect exists, I would like a quantitative analysis. Does throughput increase linearly? How much is garbage collection impacted, if at all? Does latency stay the same? And so on. Would the performance of a 8 GB SSD be significantly different from, for example, an 80 GB SSD assuming both used high quality chips, controllers, etc?

Are there any resources (webpages, research papers, presentations, books, etc) that discuss correlations between SSD performance (4 KB random write speed, latency, maximum sequential throughput, etc) and size? I realize this does not really sound like a programming question but it is relevant for what I'm working on (using flash for caching hard drive data) which does involve programming.

If there is a better place to ask this question, eg a more hardware oriented site, what would that be? Something like the equivalent of stack overflow (or perhaps a forum) for in-depth questions on hardware interfaces, internals, etc would be appreciated.


Thanks James. It doesn't fully answer my question but there are some useful tidbits. To summarize some of the relevant parts of those talks:

SSD performance can increase by 10% or more as the "spare area" on the SSD increases.
Increases in spare area on MLC (vs SLC) is particularly good at increasing performance. Most of the SSDs which are reasonably big tend to use MLC, which has somewhat higher latency and lower write bandwidth, but comparable read bandwidth.

So drawing from this, it seems that a bigger SSD will probably have higher performance than a smaller SSD, unless the reason the smaller SSD is smaller is because it uses SLC or it has a higher percentage of spare.

This is mostly what I expected but it's nice to see confirmation.

Another useful but again not entirely comprehensive look comes from just scanning some of the tech specs on the web. For example I look a look at OCZ's page here on the Vertex Turbo. It seems that throughput does not come at all close to linearly increasing with drive size. It takes a jump from 30 GB to 120 GB to see a significant difference, and even then mainly for write speed not read.

  • +1. Your reputation should be sufficient now to vote here. – Chris W. Rea Nov 23 '09 at 14:28

Check out MEMS002 and MEMS003 from Intel's Developer Forum found here: https://intel.wingateweb.com/us09/scheduler/catalog/catalog.jsp


Anandtech discusses this briefly, based on an investigation by IBM Zurich (PDF). I think the overall conclusion is that there should be 10-30% of spare area on an SSD to maintain a decent write amplification ratio. Most drives include a reserved quota of about 7% (and enterprise drives will offer more); it is up to the user (and the TRIM command) to keep extra space free to maintain full performance.

  • Right, I've seen Anand's excellent analysis before. His article mainly focuses on the effect of spare area though, which I already knew improved performance. My question was more along the lines of whether, given 2 SSDs with the same % spare area (and same in other aspects), how much faster would the bigger one be. In other words, how much is total size a factor in performance. – artif Oct 27 '09 at 1:49
  • I'm not sure. The only evidence I can think of is the fact that the 160GB Intel X25-M drive is advertised as offering higher (maximum) IOPS than the 80GB drive. Also, this generally seems to be the pattern for the transfer speeds of other brands: pcper.com/article.php?aid=736&type=expert&pid=1 – sblair Nov 5 '09 at 22:50

Storage Review has an excellent review of 6 Corsair Force Series GT drives in different sizes (from 60GB to 480GB). The summary is that larger drives in the family perform better in most scenarios (but not all). 240 GB seems to be the sweet spot (at least for the SandForce controller).

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.