I have an Asus rt-N66U with Tomato 1.28 115-EN. My goal is to separate wired and wireless traffic, so what I would like to do is attach this router with two HP 24 port managed switches.

So I have two VLAN's on the router, VLan 1 (Default VLAN) for wired connections - Ports 1 2 3 4 VLAN 3 (Wireless VLAN) for wireless connection - Ports 1 2 3

Port 1 goes to Room 1 where they have an HP Procurve 24 port switch 1 Port 2 goes to Room 2 where they have an HP Procurve 24 port switch 2 Port 3 goes to Room 3 where they have an HP Procurve 24 port switch 3 Port 4 goes to Server room where they have an HP Procurve 24 port HUB 1

So on switch 1 I have two VLANs just like the router VLAN 1, and VLAN 3. Vlan 1(default VLAN) is used for all ports 2-23. VLAN 3 is assigned to port 1, and port 24 is assigned to VLAN1 and VLAN3. Router's port 1 connects to Switch's port 24, and Switch's port 1 connects to an EA-N66 access point. While other ports connected to ethernet devices.

I have the same setup for all other rooms. So my question is having a port with two vlans tagged and connected from the router to a switch with the same VLAN ids tagged. Would that work with what I am trying to achieve as in carrying out two vlans using one port, and then separating it on the switch?

Can I have two VLANs going from the router to switch, and will the switch recognize the same vlans?

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Browse other questions tagged or ask your own question.