0

I have a problem regarding HP Pavilion G6 Series laptop.

The laptop's display stopped working.

What have I tryed:

  • I have connected it to an external monitor via VGA cable and it is showing content.
  • I have formatted the laptop and installed Windows, but the laptop's display is still not working.
  • I have unplugged the display from the connectors and plugged them back in, but still no success.

I assume that the graphic card is OK, and that there is a problem in the LCD display.

What else can I try, to test what is wrong/needs to be changed, before I order a new LCD display? If I would need to order a new display, which display should I search for and how can I know if it is compatible with this laptop?

4
  • 1
    If you have to replace the display you should check what's the laptop exact model first, because HP Pavilion G6 series is too generic.
    – and31415
    Feb 20, 2014 at 20:55
  • The laptop is HP Pavilion G6 - 1125em. Here is the link
    – Marko
    Feb 23, 2014 at 16:45
  • I found alot of them on eBay, by just entering the specification of the display, I guess that could work?
    – Marko
    Feb 23, 2014 at 16:54
  • The graphic card is fine, otherwise you wouldn't be able to display anything on a external monitor. As @Battlefist suggested, you could try replacing the ribbon connector first, and then look for a new display. Whatever you end up doing, the Maintenance and Service Guide will come in handy.
    – and31415
    Feb 23, 2014 at 17:05

2 Answers 2

Reset to default
2

There is one more thing that could go wrong.

Your display can be fine, but the display connection ribbon could be either disconnected from the motherboard or just broken and needing replacement.

In order to check you will need to buy a new display connection ribbon and disassemble your laptop.

2
  • I have disconnected and reconnected the ribbon in hope it would work, but it didn't. Before replacing the display I will order a new ribbon, to try if that was the case. The specifications for display are: 39,6 cm (15,6") High-Definition LED HP BrightView Display (1366 x 768). Is there a special display connection ribbon I should be looking for, or it's "generic"?
    – Marko
    Feb 23, 2014 at 16:50
  • It should be rather generic. Btw. nothing stops you from unplugging it and taking up with you somewhere as you are going to replace display anyway if this replacing won't work. :)
    – mwilczynski
    Feb 26, 2014 at 10:12
3

You need to order a new display. You've done all the troubleshooting possible.

I would of done these things before ending my search

I have connected it to an external monitor via VGA cable and it is showing content.

I have unplugged the display from the connectors and plugged them back in, but still no success.

Which you have done already.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.