1

So, I want to play my sound into teamspeak for a "music chat".

What I need to do is get my sound-in to be what is coming out of my speakers.

I have tried googling this in several different ways, and I can't figure out how to do it.

0

It depends on your soundcard, but usually this is a yes.

You need to select your soundcard as recording device, and from the soundcard mixer, set it to record the wave or "what you hear".

Most recent soundcards can do this, but not all.

If you do not have this option, there is an alternative.

Buy a male-jack to male-jack audio cable and plug it in from the audio-out to the line-in. Your audio is now routed from your speakers out to the line in, and you can put that into teamspeak. The only downside with this is that you cannot hear any sound yourself unless you connect to teamspeak from a different pc.

  • Hey thank you. I'll just cable it together, since I have 2 pc's I can use. – user2324827 Jun 24 '14 at 3:14
0

Old thread but if you have a Y-splitter you can actually have 2 outputs out of the same jack, one will go into the input jack, the other will connect to your speakers.

The downside: splitting the signal in 2 sources will reduce volume of original sound in half, so let's say the jack was giving out 12 dbs of loudness, now each side will give 6 dbs. If you got good speakers you can just raise the volume to hear what you need, no problem, since all you do is amplifying the sound output.

That's what speakers do essentially, they amplify the line level signal. But that's another conversation.

Your Answer

By clicking "Post Your Answer", you acknowledge that you have read our updated terms of service, privacy policy and cookie policy, and that your continued use of the website is subject to these policies.

Not the answer you're looking for? Browse other questions tagged or ask your own question.