Build
Windows 2008 R2 Server. Two (2) Ethernet ports:
- One Ethernet port, statically assigned to 192.168.2.4, is connected to an internal subnet (192.168.2.x), which I'm using for a local test Environnment.
- The second Ethernet is connected to a larger network that is assigned by DHCP: address 192.168.15.61.
Desired behavior
I want the computers on the .2.x subnet to use my server (.2.4) as a gateway to the internet. What do I need to do to get the routing to occur between the two Ethernet ports?
What I've tried
- Tried to route add, but I think there's a detail I'm missing because I couldn't get that to work.
- I tried bridging the connections after some research, but that didn't give me the desired results. What else might I do?