Super User is a question and answer site for computer enthusiasts and power users. It only takes a minute to sign up.
Sign up to join this community
I have Windows install on USB drive and would like to install it to a VMWare virtual machine.
When I create the new virtual machine and select "install from" it displays:
Installer disc - No drives available
Installer disc image file (iso)
As you can see, it doesn't find any drives.
USB drive is plugged in to my PC and is visible from system.
My PC has no CD drive, but why I can't select another drive for installation (for example a USB one)?
I can confirm that booting from USB is possible without any 3rd-party utils like "Plop Boot Manager". Just did it on VM Workstation 15 Pro (15.5.1). Here's what you need to do to boot from USB:
At this moment you'll see on VM screen:
Attempting to start up from:
-> EFI VMWare Virtual SCSI Hard Drive (0.0)... No Media
-> EFI VMWare Virtual SATA CDROM Drive (1.0)... No Media
-> EFI Netwrok...
Now you have 60 seconds to do following step:
Go to menu "VM->Removable Devices->Kingston Data Traveller 3.0->Connect (Disconnect from host)" (of course instead of "Kingston Data Traveller 3.0" you'll see you own USB device name)
Wait when "EFI Network..." stage will be timed out (60 seconds) and then it will boot normally from your USB.
If "EFI Network" stage will end too quick, you'll see Boot manager. Just press Ctrl+Alt+Insert (this is replacement for Ctrl+Alt+Del) and then all should go normally.
VMware’s BIOS does not support booting from USB drives in the virtual machine. There’s another way, though: Plop Boot Manager. It comes with an ISO image that can be used with VMware. I believe there’s also a floppy image, if you prefer oldschool solutions.
After booting Plop, you are presented with a screen with bad fonts. ;) From this screen, you can select where you want to boot from, including the option to boot from USB drives.
Assuming you have the hard drive space, just rip the contents of your thumb drive and make a bootable ISO out of it. Then just boot to that. ImgBurn is good for that.
After re-reading, it looks like you already have an ISO on the thumb drive. VMware can't use your physical flash drive to boot, so just copy the ISO file on to your local hard drive and install it from there.
I have found a method that works even without plop:
dd if=/dev/usb_stick of=image.img
VBoxManage convertfromraw --format VMDK image.img image.vmdk
After you obtain the image.vmdk file, add a secondary HDD based on that file. It will ask you to upgrade that file's vmdk format, agree on that.
Now boot your machine from that secondary drive and install the operating system on your first HDD. When done, remove the secondary HDD altogether.
I know it's an old question, but in case someone need the info: on VMWare 14, you need to modify the .vmx file, adding the next line:
firmware="efi"
With it, the VM will detect the USB device.
Make an ISO of the installer and copy the ISO to the host computer's hard drive, then in the properties for the VM after you've created it or (IIRC) when first setting up the VM, you can tell VMWare to use an ISO image file as the CD/DVD, browse to wherever you've stored the ISO and go.
go to VM>removable devices and from there select the USB of choice and click connect to VM. restart your VM afterwards
