0

I bought new RAM modules: Kingston 8GB(2x4GB) KIT DDR3 1333MHz CL9 HyperX Fury and the motherboard is an ASUS M4A785TD-M EVO. Does anyone know what could be the problem? After turning on the computer with the memory doesn’t do anything, just spinning fans.

Frequency is fine, it may be timing? I'm not familiar with it.

edit: I found nothing in the manual. There is a list of tested memory, but does not include 4 gigabytes modules. CPU = AMD Athlon II X4, power source = 350W, graphic card = internal, HDD = WD 500GB, . I can't get into bios, I can't get any output from a graphic card, no beeps. When I put the old memory (2x 2GB 1333Mhz), everything runs fine and boots up an operating system (CentOS). A combination of old and new memory doesn't work too.

4
  • Did you check the motherboard's user manual? There might be some pecularity that you simply failed to consider...wow this brings memories of fitting new memory in 386 systems. Oct 5, 2014 at 21:56
  • What cpu do you have?
    – Robin Hood
    Oct 5, 2014 at 23:12
  • I just edited the question. Thank you for your interest.
    – Meph-
    Oct 6, 2014 at 7:15
  • Timing or chip configuration is not included in the manual. But I tried to install new bios and now it is working :)
    – Meph-
    Oct 6, 2014 at 12:09

1 Answer 1

2

Update BIOS to newer version helped. Version 2104 from 2010/09/30 works for me.

  1. Download new bios version from here
  2. Extract and copy it to USB Flash disk.
  3. Restart PC, connect flash disk, and press to open BIOS configuration
  4. Find ASUS EZ2 Flash utility, press
  5. By switch to the flash disk drive and press
  6. Process automatically reboots the system when done

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .