0

I would like to install sudo with ipkg. First ipkg need to be installed. You can find the bootstrap tutorial of Synology here.

The DS413j has a Marvel Kirkwood mv6282 ARM processor. So I used this file syno-mvkw-bootstrap_1.2-7_arm-ds111.xsh

Then I follow the steps of downloading installing and removing the file. After the successful install I reboot.

I try the command 'ipkg update' with the error ipkg not found.

The opt was not mounted before the installation, I tried the installation again with unmounting it and reinstalling, same error.

Unmount commands:

mount
umount /opt
rm -rf /volume1/@optware
rm -rf /usr/lib/ipkg

What am I doing wrong here?

Every thing I did:

login as: root
root@192.168.1.9's password:


BusyBox v1.16.1 (2014-05-29 11:35:48 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

MyNas> mount
/dev/root on / type ext4 (defaults)
none on /dev/pts type devpts (gid=4,mode=620)
/sys on /sys type sysfs (0)
/tmp on /tmp type tmpfs (0)
/proc/bus/usb on /proc/bus/usb type usbfs (0)
/dev/vg1/volume_1 on /volume1 type ext4 (usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,synoacl)
MyNas> umount /opt
umount: can't umount /opt: Invalid argument
MyNas> rm -rf /volume1/@optware
MyNas> rm -rf /usr/lib/ipkg
MyNas> cd /volume1/@tmp
MyNas> wget http://ipkg.nslu2-linux.org/feeds/optware/cs08q1armel/cross/unstabl
e/syno-mvkw-bootstrap_1.2-7_arm.xsh
--2014-10-23 17:05:41--  http://ipkg.nslu2-linux.org/feeds/optware/cs08q1armel/cross/unstable/syno-mvkw-bootstrap_1.2-7_arm.xsh
Resolving ipkg.nslu2-linux.org... 140.211.169.161
Connecting to ipkg.nslu2-linux.org|140.211.169.161|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 252947 (247K) [text/plain]
Saving to: 'syno-mvkw-bootstrap_1.2-7_arm.xsh'

100%[======================================>] 252,947      218KB/s   in 1.1s

2014-10-23 17:05:43 (218 KB/s) - 'syno-mvkw-bootstrap_1.2-7_arm.xsh' saved [252947/252947]

MyNas> sh syno-mvkw-bootstrap_1.2-7_arm.xsh
Optware Bootstrap for syno-mvkw.
Extracting archive... please wait
bootstrap/
bootstrap/bootstrap.sh
bootstrap/ipkg-opt.ipk
bootstrap/ipkg.sh
1232+1 records in
1232+1 records out
bootstrap/optware-bootstrap.ipk
bootstrap/wget.ipk
Error: CPU not Marvell Kirkwood, probably wrong bootstrap.xsh


BusyBox v1.16.1 (2014-05-29 11:35:48 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

MyNas> wget http://web.archive.org/web/20121005035819/http://wizjos.endofintern
et.net/synology/archief/syno-mvkw-bootstrap_1.2-7_arm-ds111.xsh
--2014-10-23 17:06:23--  http://web.archive.org/web/20121005035819/http://wizjos.endofinternet.net/synology/archief/syno-mvkw-bootstrap_1.2-7_arm-ds111.xsh
Resolving web.archive.org... 207.241.226.190
Connecting to web.archive.org|207.241.226.190|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 251866 (246K) [text/plain]
Saving to: 'syno-mvkw-bootstrap_1.2-7_arm-ds111.xsh'

100%[======================================>] 251,866      239KB/s   in 1.0s

2014-10-23 17:06:25 (239 KB/s) - 'syno-mvkw-bootstrap_1.2-7_arm-ds111.xsh' saved [251866/251866]

MyNas> sh syno-mvkw-bootstrap_1.2-7_arm-ds111.xsh
Optware Bootstrap for syno-mvkw.
Extracting archive... please wait
bootstrap/
bootstrap/optware-bootstrap.ipk
bootstrap/wget.ipk
1227+1 records in
1227+1 records out
bootstrap/bootstrap.sh
bootstrap/ipkg.sh
bootstrap/ipkg-opt.ipk
Creating temporary ipkg repository...
Installing optware-bootstrap package...
Unpacking optware-bootstrap.ipk...Done.
Configuring optware-bootstrap.ipk...Done.
Installing ipkg...
Unpacking ipkg-opt.ipk...Done.
Configuring ipkg-opt.ipk...WARNING: can't open config file: /usr/syno/ssl/openssl.cnf
Done.
Removing temporary ipkg repository...
Installing wget...
Installing wget (1.12-2) to root...
Configuring wget
Successfully terminated.
Creating /opt/etc/ipkg/cross-feed.conf...
Setup complete.


BusyBox v1.16.1 (2014-05-29 11:35:48 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

MyNas> reboot
MyNas>
Broadcast message from root@MyNas
        (/dev/pts/1) at 17:07 ...

The system is going down for reboot NOW!

login as: root
root@192.168.1.9's password:


BusyBox v1.16.1 (2014-05-29 11:35:48 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

MyNas> ipkg update
-ash: ipkg: not found
MyNas>
MyNas> mount
/dev/root on / type ext4 (defaults)
none on /dev/pts type devpts (gid=4,mode=620)
/sys on /sys type sysfs (0)
/tmp on /tmp type tmpfs (0)
/proc/bus/usb on /proc/bus/usb type usbfs (0)
/dev/vg1/volume_1 on /volume1 type ext4 (usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,synoacl)
/volume1/@optware on /opt type bind (bind)
MyNas>
0

As you can see in the logs above ipkg was installed succesfully. you can check the version like this:

/opt/bin/ipkg -v

the ipkg update command didn't work because of the wrong location set in the .profile to the ipkg service.

If I go to the right location and then try to run the update, it works fine.

cd /opt/bin
./ipkg update

You can find more information in this topic if you are still having any trouble. http://forum.synology.com/enu/viewtopic.php?f=40&t=91861&p=346607#p346607

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.