0

I work as Telecomunications Services provider and I usually connect to customer network by using VPN Softwares like Quidway SVN Client and Cisco Any Connect.

But now, one of our customers does not accept VPN for remote access anymore. Only VPN from LAN to LAN.

What I need to do is: -> To connect my LAN to a LAN which uses Cisco-Pix (specification bellow) Authentication Method Pre-shared key (PSK) Encryption Scheme IKE Diffie-Hellman Group Group 2 Encryption Algorithm 3des-cbc Hashing Algorithm SHA1 Main or Aggressive Mode Main Mode Lifetime (for renegotiation) 28800 seconds Encapsulation (ESP or AH) ESP Encryption Algorithm 3DES Authentication Algorithm SHA1 Perfect Forward Secrecy Disable Lifetime (for renegotiation) 3600 seconds Lifesize in kB (for renegotiation) Not used

-> To allow our enginners to access my LAN (Client to LAN) which is connected to customers network (LAN to LAN). -> I intend also to straightly receive the ISP (200mb/100mb)

Can it be resolved with only one router? Can anybody help me on this?

Tks!!

0

After digging on the internet, I've found the solution for my problems.

RV042G

IPsec 50 IPsec site-to-site tunnels for branch office connectivity QuickVPN

50 QuickVPN tunnels for remote client access PPTP

5 PPTP tunnels for remote access

Encryption Data Encryption Standard (DES), Triple Data Encryption Standard (3DES), and Advanced Encryption Standard (AES) encryption; AES-128, AES-192, AES-256

Authentication MD5/SHA1 authentication

IPsec NAT traversal Supported for gateway-to-gateway and client-to-gateway tunnels

Dead peer detection (DPD), IKE, split DNS

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.