1

I am using Mac Yosemite OS to connect to my office servers via ssh. I am not able to connect through any of the Wifi (my apt's wifi or my work place's wifi). However, I am able to do ssh when I am connected via ethernet. I did the following things to solve the problems but I was not successful.

  1. Switched off my firewall but I still was not able to get connected.

  2. I pinged my server and I got Request timeout status. However, when I pinged or did ssh through my other Mac (which has Maverick OS), I was able to get positive response of my ping message and got connected (in case of any wifi).

  3. I did ssh -vvv username@host, I received the following message

    OpenSSH_6.2p2, OSSLShim 0.9.8r 8 Dec 2011
debug1: Reading configuration data /etc/ssh_config
debug1: /etc/ssh_config line 20: Applying options for *
debug1: /etc/ssh_config line 100: Applying options for *
debug2: ssh_connect: needpriv 0
debug1: Connecting to <server name> [<server ip address>] port 22.
debug1: connect to address <server ip address> port 22: Operation timed out 
ssh: connect to host <server name> port 22: Operation timed out

  4. I re-installed OpenSSL and still was not able to fix the problem.

  5. I got similar problems when I used Cyberduck, Firezilla or VNC but not in case of my other computer which has OS Maverick.

Do you have any ideas or suggestions that I should try ? Thanks!

******Update 1*******

I removed OpenSSL & brew and tried connecting to the server. I did 

ssh -vvv uname@<server-name>

The message says that the connection is established. However, I am not able to move ahead after the following message:

debug1: SSH2_MSG_SERVICE_ACCEPT received

Here is entire message: 

OpenSSH_6.2p2, OSSLShim 0.9.8r 8 Dec 2011
debug1: Reading configuration data /etc/ssh_config
debug1: /etc/ssh_config line 20: Applying options for *
debug1: /etc/ssh_config line 100: Applying options for *
debug2: ssh_connect: needpriv 0
debug1: Connecting to <server name> [<ip address>] port 22.
debug1: Connection established.
debug1: identity file /Users/snape/.ssh/id_rsa type -1
debug1: identity file /Users/snape/.ssh/id_rsa-cert type -1
debug1: identity file /Users/snape/.ssh/id_dsa type -1
debug1: identity file /Users/snape/.ssh/id_dsa-cert type -1
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_6.2
debug1: Remote protocol version 2.0, remote software version OpenSSH_6.6.1p1 Ubuntu-2ubuntu2
debug1: match: OpenSSH_6.6.1p1 Ubuntu-2ubuntu2 pat OpenSSH*
debug2: fd 3 setting O_NONBLOCK
debug3: load_hostkeys: loading entries for host "dna.nri.bcm.edu" from file "/Users/aayushraman/.ssh/known_hosts"
debug3: load_hostkeys: found key type RSA in file /Users/aayushraman/.ssh/known_hosts:1
debug3: load_hostkeys: loaded 1 keys
debug3: order_hostkeyalgs: prefer hostkeyalgs: ssh-rsa-cert-v01@openssh.com,ssh-rsa-cert-v00@openssh.com,ssh-rsa
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa-cert-v01@openssh.com,ssh-rsa-cert-v00@openssh.com,ssh-rsa,ssh-dss-cert-v01@openssh.com,ssh-dss-cert-v00@openssh.com,ssh-dss
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-gcm@openssh.com,aes256-gcm@openssh.com,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc@lysator.liu.se
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-gcm@openssh.com,aes256-gcm@openssh.com,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc@lysator.liu.se
debug2: kex_parse_kexinit: hmac-md5-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-64-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,hmac-ripemd160-etm@openssh.com,hmac-sha1-96-etm@openssh.com,hmac-md5-96-etm@openssh.com,hmac-md5,hmac-sha1,umac-64@openssh.com,umac-128@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-64-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,hmac-ripemd160-etm@openssh.com,hmac-sha1-96-etm@openssh.com,hmac-md5-96-etm@openssh.com,hmac-md5,hmac-sha1,umac-64@openssh.com,umac-128@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib@openssh.com,zlib
debug2: kex_parse_kexinit: none,zlib@openssh.com,zlib
debug2: kex_parse_kexinit: 
debug2: kex_parse_kexinit: 
debug2: kex_parse_kexinit: first_kex_follows 0 
debug2: kex_parse_kexinit: reserved 0 
debug2: kex_parse_kexinit: curve25519-sha256@libssh.org,ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256,ssh-ed25519
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-gcm@openssh.com,aes256-gcm@openssh.com,chacha20-poly1305@openssh.com,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc@lysator.liu.se
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-gcm@openssh.com,aes256-gcm@openssh.com,chacha20-poly1305@openssh.com,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc@lysator.liu.se
debug2: kex_parse_kexinit: hmac-md5-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-64-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,hmac-ripemd160-etm@openssh.com,hmac-sha1-96-etm@openssh.com,hmac-md5-96-etm@openssh.com,hmac-md5,hmac-sha1,umac-64@openssh.com,umac-128@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-64-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,hmac-ripemd160-etm@openssh.com,hmac-sha1-96-etm@openssh.com,hmac-md5-96-etm@openssh.com,hmac-md5,hmac-sha1,umac-64@openssh.com,umac-128@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib@openssh.com
debug2: kex_parse_kexinit: none,zlib@openssh.com
debug2: kex_parse_kexinit: 
debug2: kex_parse_kexinit: 
debug2: kex_parse_kexinit: first_kex_follows 0 
debug2: kex_parse_kexinit: reserved 0 
debug2: mac_setup: found hmac-md5-etm@openssh.com
debug1: kex: server->client aes128-ctr hmac-md5-etm@openssh.com none
debug2: mac_setup: found hmac-md5-etm@openssh.com
debug1: kex: client->server aes128-ctr hmac-md5-etm@openssh.com none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug2: dh_gen_key: priv key bits set: 127/256
debug2: bits set: 504/1024
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug1: Server host key: RSA 59:d3:ec:27:16:df:01:04:8a:7a:92:34:3f:91:16:8d
debug3: load_hostkeys: loading entries for host "dna.nri.bcm.edu" from file "/Users/snape/.ssh/known_hosts"
debug3: load_hostkeys: found key type RSA in file /Users/snape/.ssh/known_hosts:1
debug3: load_hostkeys: loaded 1 keys
debug3: load_hostkeys: loading entries for host "10.34.48.30" from file "/Users/snape/.ssh/known_hosts"
debug3: load_hostkeys: found key type RSA in file /Users/snape/.ssh/known_hosts:1
debug3: load_hostkeys: loaded 1 keys
debug1: Host '<server name>' is known and matches the RSA host key.
debug1: Found key in /Users/snape/.ssh/known_hosts:1
debug2: bits set: 513/1024
debug1: ssh_rsa_verify: signature correct
debug2: kex_derive_keys
debug2: set_newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: Roaming not allowed by server
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received

Also when I tried to do ping, I am able to do it and able to receive the message and not errors !!

I think I am pretty close to the solution and for sure brew didn't work properly on my mac yosemite.

********Update 2**********

I was able to solve the problem by:

  1. removing the brew

  2. basically giving the argument for UseDNS as no

    vi /etc/sshd_config UseDNS no

  3. service sshd restart by

    unset SSH_AUTH_SOCK

and then do ssh

Improve this question
2
  • what does traceroute host tell you? You say you get a timeout on both imp ping and tcp on port 22. This would suggest there is a connectivity issue. Can you use the internet when only connected to wifi?
    – Paul
    Jun 16, 2015 at 21:06
  • Hi @Paul -- I ran traceroute <server name> and I didn't receive any error message. It ran for 64 hops showing that the packets were received. I have tried using internet both thru wifi and ethernet cable of my apartment. I don't know why am I having connectivity issue on my one Mac with yosemite but other one works fine.
    – snape
    Jun 16, 2015 at 23:48

1 Answer 1

Reset to default
0

I was able to solve the problem by:

  1. removing the brew

  2. basically giving the argument for UseDNS as no

    vi /etc/sshd_config UseDNS no

  3. service sshd restart by

    unset SSH_AUTH_SOCK

  4. and then do ssh

Improve this answer

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.