After installing fedora and Centos and other OS now I have them all showing in my Boot menu [F2] on start up not the menu form the OS even after deleting them and reinstaling other OS - Ubuntu -so It just shows one when the OS starts but when I go to UEFI setting I still find all the old ones they instruct you to use DEL to take them out but that does not work
The menu to which you refer is the firmware's built-in boot manager. Its entries are stored in NVRAM, and can be edited by any number of tools in various environments:
- Some EFIs provide a means to do this via their setup utility. Details vary from one system to another, though, and many don't permit you to add or delete boot manager entries.
- The EFI version 2 shell provides a command called
bcfgthat can do the job. You'd need to do
bcfg boot dump -bto see the entries, then
bcfg boot rm #to delete entry number
#must be the number associated with whatever entry you want to remove. For example, if the entry is
Boot0002 Fedora, then # is 2.
- In Linux,
efibootmgrcan do the job: Type
efibootmgr -vto see the entries, then do
efibootmgr -b # -Bto delete entry
#. (You must type these commands as
- In Windows, the EasyUEFI tool should be able to handle the job, although I've only toyed with it briefly, so I can't give detailed instructions.
Be aware that in any of these cases, you may have leftover files on your EFI System Partition (ESP). You can delete them through normal file-manipulation commands, although depending on your OS, you may need to explicitly mount the ESP. If they aren't referenced, the files won't do any real harm, unless they consume so much space that they prevent you from installing another OS or updating your boot manager. The files will normally be stored in subdirectories of the
EFI directory on the ESP; most OSes create subdirectories named after themselves or the companies that create them, such as
EFI/ubuntu for Ubuntu or
EFI/Microsoft for Windows.
Thanks this looks more like what I was looking for but i get " Boot0002 Fedora HD(1,800,64000,302c2451-c097-4942-8007-140e08449e9f)File(\EFI\fedora\shim.efi) " so what should I use for the # ?? I tried the name and then I tried Boot0002 and non of them work– TalalJun 22, 2015 at 18:30
OK got it it is just the single number of the boot like in the case above 2 :) thanks alot @RodSmith– TalalJun 22, 2015 at 20:40
3Sometimes it is necessary to remove the folder on the EFI partition as well, otherwise it will be added back on reboot askubuntu.com/questions/788708 Jun 19, 2016 at 7:37
sgdisk -iis useful to determine wheter a partition with a specified GUID exists or not in case you use
efibootmgr– IniDec 23, 2018 at 20:04
Isnt's there just one command? I have an old laptop thata doesnt have Windows anymore and the boot options is filled over a 100 'Windows Boot Manager' entries to the point it takes 5 minutes just to load the EFI/Legacy settings. I would like to wipe these fuckers off because it's annoying. I can't install anything because it takes forever to enumerate the boot entries– chx101Jul 30, 2019 at 4:00