0

I am working on a project with other people, and we are using my computer as server, we use subversion as a control version, and the repository resides in my computer, we don't want to use any other server, and the problem is that my colleags only have access to the repository when we connected to the same network, how can they access the server (my local server) from outside the network i am conncected to, any suggestion ?

7
  • Do you have access to the router via Telnet, SSH, or WebUI? Nov 4, 2015 at 16:59
  • Open the necessary ports on the router that connects your internal network with the internet.
    – LPChip
    Nov 4, 2015 at 16:59
  • Why open ports when you can VPN?
    – codaamok
    Nov 4, 2015 at 17:00
  • @cricket_007 of course it is. How else can they get internet to the local network? there's always some kind of router involved. If its not the basic home router, he'd know enough to not need to ask this question in the first place, because then you're going higher networking stuff.
    – LPChip
    Nov 4, 2015 at 17:00
  • 1
    @LPChip The question was more geared towards "that you have access to?" rather than if one is existent.................
    – codaamok
    Nov 4, 2015 at 17:02

1 Answer 1

1

You can either use a VPN technology so they can access your network from somewhere else in the world or you can simply setup port forwarding on your router.

Port Forwarding can be easily achieved using your router menus but your external IP address will often change unless you pay for a static IP address from your ISP.

Noted: Some ISP routers may have a DynamicDNS (or other service) tab that provides a service to get from the url myrouternetworkname.dynamicdns.net/ to your ip address. I found this quite cumbersome the first time I did it, but there are guides online to help you with this.

Setting up a VPN may not be ideal, but is often used to play LAN games over the internet so it should fit for any developing needs you have.

4
  • 1
    Nice answer. You may add that for VPN, depending on which technology you use, the changing IP may also be a problem.
    – LPChip
    Nov 4, 2015 at 17:03
  • Most services will provide IP mapping by default as a basic feature but you are right, your comment should be enough. Nov 4, 2015 at 17:05
  • Dynamic DNS to WAN IP + Static IP to LAN machine would be preferred. Nov 4, 2015 at 17:05
  • If a service is used, yes. But there are routers out there that are not that expensive that support VPN through PPTP. In these cases port forwarding would still be easier, but for the sake of clarifying if they use such method, the IP changing would still apply. :)
    – LPChip
    Nov 4, 2015 at 17:08

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .