Questions tagged [10gbit]
10 Gigabit Ethernet (also called 10 GE, 10 GbE, or 10 GigE).
30
questions
1
vote
1
answer
100
views
Not able to achieve 10Gbe against one device
I have 3 different 10Gbe devices on my network and 2 switches. Switch 1 has a MacMini M2 with a 10Gbe ethernet connected via RJ45. Switch 2 have a Custom NAS and a Ubiquiti NVR connected via SFP+. ...
0
votes
0
answers
351
views
What is likely to cause very slow file copy over 10Gb NICs?
Copying data across my local network is extremely slow. The network in question is 10Gbe only. That is everything on the 10.0.2.0 subnet is 10Gbe and every device/switch is on the same VLAN with jumbo ...
0
votes
1
answer
289
views
HPE Proliant Gen8 FlexibleLOM options for homelab network
In my homelab rack I've got a pair of DL360p's and a pair of DL380's (one P, one E). Network hardware wise I've got a 24 port Brocade 300 and a 48 port POE+ Avaya switch with a single SFP+ port. (...
0
votes
1
answer
176
views
Mellanox Connect-X 2 10 gigabit Performance Problems
I'm currently using two Mellanox Connect-X 2 card to connect two computers for a 10 gigabit network connection. However, I recently moved one of the cards from an Asus X99 Deluxe with an i7 5960x to ...
1
vote
0
answers
204
views
Setup fiber home network with single Router connection to FTTH ISP
Networking noob here. I have the following network setup at home (north Germany) right now:
As you see, the ISP ONT inside the top floor of my house has an SC/UPC connector that connects to a ...
1
vote
0
answers
189
views
Bandwidth from Linux to Linux (8Gbps) greater than from Linux to Windows(600Mbps)
On the one hand I am using a Nvidia Jetson Nano together with an Auvidea Carrier Board JNX30B and a 10Gbps network card (ASUS XG-C100C).
On the other hand I am using a desktop computer equipped with ...
1
vote
1
answer
770
views
Cant ping over direct fiber connection using static ip addresses win10 to ubuntu 20.04
So far have not been able to get my pc direct connected to my server and I am hoping someone can see where I have gone wrong or what I have missed. I have searched through many posts and spent some ...
0
votes
1
answer
592
views
Fibre Channel SFP+ for Ethernet
I have some spare Fiber Channel SFP+ transceivers (8G and 10G) available. Is it possible to use them in an SFP+ Ethernet card (10G)?
0
votes
1
answer
996
views
Changing Intel X710 fiber NIC speed
I have a optical X710 NIC which runs in 10,000Mb/s speed (SFP+). I use ethtool to show its capabilities:
ethtool enp1s0f0
Settings for enp1s0f0:
Supported ports: [ FIBRE ]
Supported link modes:...
0
votes
1
answer
2k
views
Super slow speeds between Windows 10 (Asus XG-C100C) and Mikrotik CSS326-24G-2S+RM
Windows 10 with last updates
Asus XG-C100C (Aquantia AQtion AQC107) with last driver and last firmware
Mikrotik CSS326-24G-2S+RM with last update and last firmware
Connection scheme: Windows 10 -> ...
0
votes
0
answers
272
views
Will multiple network connections from NAS / Computer to switch increase transfer speeds
I have a NAS with 4 drives in. Each drive can sustain around 140MB/s read speed giving a total (completely theoretical*) read speed of around 4.5 Gbps. My NAS is connected to my Gigabyte switch with 1 ...
3
votes
0
answers
2k
views
Windows iperf3 speed test slower than Linux
Hardware setup
NAS: Core i3 7100, Intel X540T2 10GbE
Switch: Mikrotik CRS305
PC: Ryzen 7 2700, Intel X540T2 10GbE
Cables: 2x Cat 7 cables
Software Setup
NAS: Ubuntu 20.04
alexwang@alex-nas2 ~ (...
0
votes
1
answer
330
views
UDP RSS not working on Windows 10 with Intel NIC X550-T2
I tried to acquire 10GBit/s of UDP traffic most of the time lossless (the measurement device is not capable to hold so much data in the own cache, so TCP is not a solution here).
To test if I can ...
1
vote
0
answers
46
views
Possible to get 10Gbit/s acess to NAS storing data?
I'm storing my data (pictures and 4k video files) on a NAS using SATA II HDDs. In my opinion SSDs are not a good choice for just data storing as they are more expensive and with the time SSD could ...
1
vote
0
answers
171
views
10Gbit home network speed issues
I recently upgraded my home network to 10Gbit but I don't get this speed.
tl;dr:
Two devices have 10Gbit network adapters and between the two I get max 2Gbit speed.
My Windows-based laptop with Wi-...
0
votes
1
answer
496
views
LACP for higher throughput?
Given a D-Link DGS-1510-20 switch, which features 2x 10Gbps SFP+ ports and 20 1Gbps RJ45 ports and a Fedora-based server with 4x 1Gbps RJ45 ports, is there any configuration setting that allows me to ...
1
vote
0
answers
314
views
Disadvantages of field termination plugs for home networks
For my home network I consider to use field termination plugs
like this instead of a patch panel or keystones.
In my basement there are about 20 CAT7 cables which I need to connect to a (web ...
1
vote
1
answer
91
views
Simple way to verify 10Gbit performance of a home network
In my new house I have CAT7 cables for my home network which should support network speeds up to 10Gbit.
Now in 2019 10Gbit is a overkill for me and upgrading my switches and PCs to 10Gbit is too ...
2
votes
2
answers
973
views
10Gb PCI-E 4x LAN card on CPU lane, built in intel graphics
Despite searching since a few days, no one seems to have such scenario, world being filled now with high end GPU fans :-)
I have an ASUS ROG Strix Z390-F, powered with an i9-9900K.
Available MB PCIE ...
1
vote
1
answer
1k
views
Unstable 10Gbit connection of Mikrotik CSS326-24G-2S+RM with Mikrotik S+RJ10 SFP
I use one ASUS XG-C100C network card in each of two PCs that are connected to Mikrotik CSS326-24G-2S+RM (each via Mikrotik S+RJ10 SFP).
One PC is very close (2 meter Cat5E cable), the other is far (...
0
votes
1
answer
116
views
Inconsistent single large file copy speed (W2k12)
The case is:
2 (identical) W2k12 physical blade servers,hosted on the same enclosure.
connected via enclosure internal 10Gbe switch (Force10 MXL).
Both servers are at the same subnet.
Both servers ...
0
votes
0
answers
92
views
Directly link two machines while both are connected to a switch
Let's say I have two machines, both with dual (10Gbit) nics. One is my unraid server that acts as a NAS, among other things, the second is my desktop. Both boxes are connected to a Gbit switch. I can ...
1
vote
1
answer
4k
views
Understanding 10gbe data transfer
I want to understand about fiber 10g switches data transfer. Before asking my question i want to explain you guys about my office. I have one server and 25 computers. This office is now working on 1g ...
1
vote
2
answers
50
views
Multimode fibre and transmission distance
Noob fibre question, I suspect.
A while ago while there was a trench open between my house and an outbuilding, I took the opportunity to lay a 15 metre length of armoured OM1 fibre (4 core, LC-...
1
vote
2
answers
5k
views
Add direct 10GB connection on separate network
I am trying to setup a direct 10GB connection between my Windows 10 PC and my Diskstation D1817+ for fast photo / video editing. I have installed the 10GB cards in both and have connected via a CAT 7 ...
-1
votes
1
answer
748
views
10Gb ethernet between two computers [closed]
I've edited this question to prevent it from being downvoted and/or closed
What kind of cable will allow a direct connection between two computers with 10Gb Ethernet. I see there are a few choices (...
2
votes
0
answers
1k
views
where does Windows Task Manager measure network data rate
I am trying to build a 10Gbps Ethernet channel between an FPGA and a Windows 7 PC. For a rough estimate, I measured the bandwidth usage of the link using Windows Task Manager's Network Tab. Later I ...
0
votes
2
answers
4k
views
fix/Increase LAN transfer Speed
Setup Below*
So I have a direct connection between my PC and my server which hosts (10 GbE network card to 10 GbE network card) and the only time I use this connection is when I transfer files ...
2
votes
3
answers
1k
views
Testing 10G Ethernet with two NICs?
I would like to test 10Gig Ethernet serial interface by installing two NICs(Network Interface Cards) on a pc and pinging. I have the following questions:
1- Can two separate NICs be installed in one ...
3
votes
1
answer
2k
views
10GbE Win8.1 file sharing between 3 PCs without a switch
I have 3 windows 8.1 PCs, and they each have two one-port Mellanox 10GbE NICs. I'm using 3 SFP+ Twinax cables to connect them all as per below diagram. Only one of those PCs is also connected to ...