Questions tagged [adsl-router]

The tag has no usage guidance.

Filter by
Sorted by
Tagged with
0
votes
0answers
16 views

PVC bridge IP address conflict

ADSL Router. DHCP On. PVC0: 8/35 PPPoE/LLC IGMP: Disabled NAT: On Default Connection: Enabled (Internet) PVC1: 0/33 Bridge PVC3: 0/32 PPPoE/LLC IGMP: Enabled NAT: On Default Connection: Disabled (IPTV)...
-3
votes
0answers
18 views

my ADSL router line speed (downstream and upstream ) comes down if turn off and then reboot the router

and only GOES BACK TO NORMAL if I remove DSL socket from both router and WALL (LINE) SOCKET(plug) FROM PHONE jack and connecting them again plus rebooting the ROUTER , sometimes I should try the same ...
0
votes
0answers
24 views

Wired connection doesn't work , but wireless does

WiFi works fine. Ethernet connection is where I am having a problem. I tried changing cables I tried 4 different ones all new. Thought maybe my network cards are faulty so I tried 3 different laptops ...
0
votes
0answers
32 views

How to disable QOS in router setting?

I try to disable QOS configuration in router setting and do such as below but Qos is Enabled My Isp tell me that my router configured to 8Mbs but my internet service is 16Mbs. How can I disable it?
0
votes
0answers
22 views

Router unable to obtain IP

I own a d-link router model DSL-2877AL.. used to work flawlessly in the past 8 months but recently the routers internet light will always stay red which indicates a failed PPPoe negotiation.. VDSL2 ...
0
votes
0answers
34 views

Securely routing all traffic in a home network through a secondary firewall/gateway

FYI, I'm not a networking expert by way a long shot :-). I Have a plain simple home networking setup: a VDSL modem/router with home devices directly connecting to it mostly through wireless. I'd like ...
0
votes
0answers
8 views

web application not accessible from other networks through public IP

I am trying to access Laravel web application from other network using my machine public IP so I ran the following: php artisan serve --host 0.0.0.0 --port 8083 then I forwarded the port on my ASUS ...
0
votes
1answer
251 views

How to bridge multiple adsl router in a single network?

I have two extra adsl router(SSID named as 0 and 1) and a main router(SSID named as 2) provided by my ISP. Now I want to extend my internet connection via wifi or lan using those two adsl router. I ...
1
vote
1answer
97 views

magic packet doesn't work with specified IP address

I'm using Debian with installed wakeonlan package. An old Gigabyte G41MT-D3 is connected to TP-Link Modem/Router combo with static DHCP IP rule as following: 192.168.1.110 problem is: using command ...
3
votes
1answer
254 views

can i connect two pcs to a router using ethernet without hub and switch?

I have a router and wanna connect it to two pcs using ethernet cable. I've seen similar question here and it had a good answer but the following pattern that they were talking about was surely not ...
0
votes
0answers
33 views

Reconfigure the adsl router

My internet suddenly stopped. My internet provider is Acanac. So I decided to reset the router, which from TP-LINK. Then I went into the Ip address: 192.168.1.1 and then after authentification and ...
0
votes
0answers
56 views

ADSL connection issue

I have a problem with the ADLS internet connection: when the first pc is connected, everything is ok and the browsing speed is about 4 mbps per second without lost packets, when the second pc connects ...
0
votes
1answer
652 views

Wifi disconnection issue on some devices

We are having strange issue on our home network. Wifi signal does not appear on some of our devices with signal status out of range, while it works on some devices at the same time. It works on: ...
0
votes
1answer
325 views

No DSL internet if splitter is used

If I connect my router directly to the main DSL cable, my internet works just fine. If I connect it to a telephone, it also works. When I try to use a splitter to use both the internet and the ...
1
vote
1answer
76 views

How to use non-ADSL router with ADS line?

Currently I connect to ADSL line with an old linksys wag54gs modem/router device. I'm not satisified with it and would rather use my TP-Link Archer C7 with openWRT - which obviously has no modem ...
2
votes
1answer
109 views

How to share files on all computers back and forth with my isp and second router connected?

I have 7 computers, but I can only share files with computers in router-1 (ISP router), but in the second router, I can't see anything behind it on the network. I have PLDTMyDSL router in philippines, ...
1
vote
1answer
928 views

ACTIONTEC C1900A VDSL modem: telnet shell password?

I have an ACTIONTEC C1900A ADSL/VDSL modem (CenturyLink branding). I have searched, and it seems it is not possible to purchase this device without CenturyLink branding and firmware. The device has ...
0
votes
0answers
161 views

My netgear DGN3500 support VDSL?

Does my netgear DGN3500 support VDSL ? I tried to google but could not find an answer . I need that to upgrade to new higher speed from my ISP.
-2
votes
1answer
40 views

Where is this web pages located/ hosted?

when I type 192.168.154.154 (some 192.168.0.1, 192.168.1.1) on my browser, it gives me some web pages that (sort of) controls the setting/ options on my router. Now my questions are: Where is this ...
4
votes
2answers
2k views

ADSL modems directly connected

Is there a way to connect two ADSL modems together directly, to each other's ADSL port? As far as I can see, this is not likely as they both act as clients, and there needs to be a server. Correct me ...
1
vote
1answer
256 views

One lan on two ADSL modems connected to the same ISP

We have two routers connected to the same ISP, both are connected to the ISP through ADSL. Computer a is connected to router A, and b is connected to router B. tracert from a to B is 3 hops: a to A ...
0
votes
1answer
145 views

How can I configure my ADSL2+ modem to tunnel all the traffic through a SSH tunnel

I know about SSH tunneling and I always do it (to a remote SSH server) using PuTTY (or ssh -D when I'm on Linux) to stay anonymous while web surfing (i.e. by setting my browser's proxy settings to ...
0
votes
1answer
51 views

Difference between downloading speed

I have ADSL connection with speed around 7.7-8 Mbsec. Monitoring traffic shows that on youtube i have all of that speed, but in other cases like torrents or game launchers i have aroud 700 - 800 Kbsec....
0
votes
1answer
62 views

How to figure out whether existing DSL modem can connect to my ~50 Mbit/s internet connection?

Some month ago I switch from a 16 MBit/s to a 50 MBit/s internet connection and started renting a AVM FRITZ!Box 7412 which is extremely buggy in term of the web UI (random appearance of elements) and ...
1
vote
0answers
116 views

Can a cheap ADSL modem router be responsible for frequent disconnects from and speeds from/to my ISP?

I experience frequent disconnects from my ISP (about 100 every day). Some connections do not last longer than a few seconds. I also experience very slow internet download and upload speeds – even ...
1
vote
1answer
7k views

How do you ssh into an D-Link router?

I was able to telnet into an D-Link router in the default state using admin:admin, but using the same username and password, I wasn't able to ssh into it (from the same LAN) eventhough ssh is open.
-1
votes
1answer
78 views

Are Gigabit Rated Routers Really Useful in SOHO Environment?

I have a Wireless Dual Band Gigabit Router. The product is rated with Wifi speed of 300 Mbps. Does this mean that router can send data at speed up to 300 Mbps through the air AND that to receive that ...
0
votes
0answers
19 views

How to enable access point

While configuring my ADSL router i mistakenly disabled the access point now my router just has a power light. I don't know how to connect the router to my pc and configure it again. Please help
1
vote
1answer
50 views

Why does 2nd router connected to phone line but powered off slow broadband connection speed

I've recently switched ISP and I'm using a router they supplied. After much trial and error with micro filters and cables I've found that my reduced ADSL broadband speed was happening because I'd left ...
0
votes
1answer
753 views

how to use vodafone adsl router as normal router

I got a vodafone dsl easybox 602 router and modem from a friend of mine. At my home I have broadband connection. I want to use this broadband connection with the vodafone router and use it as wifi ...
1
vote
0answers
1k views

Windows 10 computer causes router to fully reset

Last year I had a similar problem, I had posted a ticket about it: Windows 10 computer causes router to reset constantly This was with a notebook and we could not find a solution to it. Several ...
3
votes
0answers
3k views

How to monitor bandwidth use of each device on dlink 2750u

The method which i saw online is to install custom firmware on your router and to be precise install DD-WRT or TomatoUSB firmware. But unfortunately DD-WRT or TomatoUSB doesnt support D-link 2750u ...
-1
votes
1answer
42 views

How to setup a home network for maximum flexibility [closed]

I am buying some new boxes for my home network, and would like to know what kind of boxes I should have great flexibility the next few years for monitoring and control? What kind of (Open source) ...
0
votes
0answers
1k views

Directly connect phone land line to laptop to act as an ADSL modem

I have a laptop which has an rj11 port (LSI HDA Modem). Is it possible that I could directly connect the phone line (which has an adsl subscription on it) to the laptop so that the laptop could act ...
0
votes
1answer
228 views

Clients of small dormitory wireless routers cannot connect to the internet

I have some weird problems occurring on a small dormitory (30 rooms total) LAN that I manage. Here is the current network layout of the dorm: Please note that I already did some experiments last ...
0
votes
1answer
2k views

Super hub 3.0 unable to communicate with Chromecast

I recently got Virgin Media installed and their SuperHub 3.0 which is not able to communicate with my Chromecast, also my kodi/osmc does not show up in yatse either. This all worked fine when I was ...
0
votes
0answers
1k views

Optimally Connecting 2 routers to avoid double NAT

My d-link DSL router router is a wired only router. It has just 1outport - Ethernet port & this connects to the WAN port of a Linksys WRT 110 802.1N WiFi router . If I keep the DSL router in "...
0
votes
1answer
40 views

DSL and WLAN router working on LAN ports

I connected DSL router with WLAN router (disabled DHCP) over LAN ports. Internet is working. Can someone explain how this works?
0
votes
0answers
306 views

How flow control occurs between ADSL modem and DSLAM?

When Adsl modem gets the ethernet packets, it forwards them to DSLAM at Central Office by phone lines,as i know ethernet protocol uses pause frames for control flow so what kind of protocol is there ...
0
votes
1answer
657 views

Disable telnet service on routers?

I have found that the telnet service is running on a router. Telnet is publically known to be insecure. How does one turn off telnet service on adsl routers? Please advise how one can disable telnet ...
0
votes
0answers
187 views

Router lights are green, still unable to access internet

I have a TP Link modem router (TD-W8901N 150 Mbps wireless-n ADSL2+ modem router). My ISP had given me a phone along with the connection. But since I didn't need it, I removed the splitters and ...
0
votes
1answer
819 views

Connecting 2 ADSL2 Modem Router in one splitter

I am having a new ADSL2+ Modem Router. I brought it few days back when my old one got complaint. It's working well but it doesn't have good connectivity in specific places. Today I received my old ...
0
votes
0answers
33 views

Wireless network management

My (wireless) network implementation, goes like this : 5 ADSL lines (Up to 24 Mbps) but they work aprox. @ 4-5 Mbps. I want to support 60 clients on the same time. The routers we have available : ...
2
votes
0answers
463 views

Convert ADSL wireless router to AP, not able to connect to internet wirelessly

I have a Zyxel P-660HW-T1 v3 ADSL2+ Wireless Router. I have a PPPoE broadband connection. There is a CPE on the rooftop. An RJ45 cable comes down from the CPE to my house. I need to have wireless ...
0
votes
0answers
2k views

Change wifi router password of TPlink TD-W8951ND

Recently, I found out that someone changed my router's default password. So, I have not been able to log into the router setting of my TPlink. While opening, 192.168.1.1 , it asks for password, and ...
1
vote
2answers
8k views

How can I fix DNS resolution on second router in home network?

Symptom: Delays of up to 30 seconds resolving DNS when plugged in to or Wif Connected to second router. Ping can take just as long via domain name, near instant via IP No problems when connecting ...
0
votes
2answers
453 views

How to enable PPPoE Passthrough in DS-Link WR151DN

My ISP provides the internet via PPPoE and if I enter the user name and password in its connection wizard, it can't connect to the ISP server. As I learned, it requires PPPoE Passthrough (aka PPPoE ...
-1
votes
1answer
1k views

Internet connection becomes very slow after a while [closed]

Since past few days my internet connection isn't working properly. It becomes very slow after 2-3 minutes. I have to restart the modem after every 2 minutes to use it. Nothing seems wrong with my ...
1
vote
1answer
5k views

Using LAN port instead of WAN port

I have a small query regarding WAN port use on the Router. Why is it not possible to use the regular LAN port on the router to connect to the ADSL modem+Router(with just 1 RJ45 port and 1 RJ11 port). ...
1
vote
1answer
2k views

can i use my wireless adsl2 router+modem as modem only?

I have tenda w150D wireless router+modem. Its antenna is broken & it doesn't support dd-wrt. Now I wish to buy a router that does support dd-wrt. So can I use this current router+modem as modem ...