Questions tagged [configure]

Configure is an autoconf script used to configure software source packages for building on Posix-like operating systems.

Filter by
Sorted by
Tagged with
0 votes
0 answers
8 views

Is it possible to compile & install perl from source without the configuration script prepending a version to the final produced binary names?

Okay, so I'm trying to compile & install Perl from source. One issue though, when I run make install to finally install it the binary directory it outputs looks something like this: perl5.35.12 ...
user avatar
  • 1
0 votes
1 answer
19 views

Cisco Router - not saving nat routing information in startup script

I have a client with an old Cisco Router (Cisco 2851 (revision 53.51)), using Cisco IOS Software, 2800 Software (C2800NM-IPBASE-M), Version 12.4(3i). I needed to open a new routing port to a computer ...
user avatar
0 votes
1 answer
173 views

UEFI Variable Storage (removing /sys/firmware/efi dump files) when Kernel Variables CONFIG_EFIVAR_FS & CONFIG_EFI_VARS both =y as in Ubuntu 20.04

In the Arch Wiki I see that the two kernel variables CONFIG_EFIVAR_FS & CONFIG_EFI_VARS should be set =y and =n respectively. Arch says, "This option should be disabled to prevent any ...
user avatar
  • 676
1 vote
1 answer
98 views

i3wm: Duplicate workspace to new monitor

I'm looking for a way to duplicate a workspace to another monitor (i3wm). I'm using arandr (screen layout manager), but workspaces are always split between screens. Let's say I'm making a presentation ...
user avatar
  • 11
0 votes
0 answers
19 views

How to specify dependency in the configure.ac and spec.in file

I am making a rpm for a python code. My code needs a python package "requests" and a command "nc" from the nmap-ncat package. In the spec.in file, I have mentioned the dependency ...
user avatar
0 votes
1 answer
28 views

How to un-mark a SATA HDD “as spare” in Windows 10

I have a desktop computer with an extra HDD connected to it via SATA port, and I have done "mark as spare" to the drive, but I don't remember where I got to that setting, and I want to undo ...
user avatar
  • 111
0 votes
0 answers
21 views

How to dock a laptop at multiple workstations which have multiple printers that require a strict configuration

I have been working to try to find a solution yo this problem for a very long time and just can seem to find anything that will work details outlined below 3 work stations 3 label printers 1 laptop ...
user avatar
1 vote
1 answer
27 views

Where should I place all the configurations for my web site on Apache?

I have a web site on the Apache HTTP Server that's installed on the Ubuntu Server. I create my own config file in the /etc/apache2/sites-enabled/mywiki.conf where I added the <VirtualHost>...<...
user avatar
1 vote
0 answers
28 views

Conventient way to store configuration and setup files for after reinstalling Windows

So, my Windows 10 has been running slow and things that have been working previously is suddenly not working anymore. I'm planning to do a full reinstall (wipe my entire disk), but I'm not looking ...
user avatar
1 vote
1 answer
1k views

Can not find kubeconfig file

I am trying to access a remote kubernetes cluster with kubectl. In order to copy/paste cluster credentials in the kubeconfig file I executed "~/.kube/config" command but there is an error ...
user avatar
  • 11
0 votes
2 answers
30 views

Establishing Connection to Ethernet Switch

I am trying to configure a basic network for a LAN. The LAN consist of only devices and an Ethernet switch. The devices are using Ubuntu. To configure a basic network, the computers must be on the ...
user avatar
0 votes
1 answer
70 views

How to prevent programs from creating firewall rules

I configured firewall for blocking all non-vpn traffic (VPN client only allowed), but some programs automatically create rules to allow all their connections. Can I configure group policy or something ...
user avatar
0 votes
1 answer
191 views

Strange error when trying to configure Snort

I've been following this guide: https://medium.com/@koayyongcett/snort-installation-in-kali-linux-from-the-source-9a005558a2ea teaching how to install snort, as using the apt-get install snort command ...
user avatar
0 votes
2 answers
191 views

top: how to fix the "window entry #1 corrupt" error

I have a ~/.toprc exactly like the one here, and it has always been fine. However, since I update my Ubuntu to 20.04 LTS from 18.04, I no longer able to run top with it any more. This is what I'm ...
user avatar
  • 7,131
0 votes
1 answer
45 views

Where is the config file that allows you to edit the text for invoking root via terminal?

The current text is "[sudo] password for $username:". Where is the config file that allows you to modify this?
user avatar
  • 101
0 votes
1 answer
174 views

What is the meaning of a word or words surrounded by square brackets at the top of various file types?

I see various file types with the following structure at the top of the file: [xxx] I work with AWS a lot and I see it often in their config files. For example regarding CFN-init, the config files ...
user avatar
2 votes
1 answer
79 views

How to pass configure arguments as a parameter to a function in bash?

I was working on a bash function to help me to compile packages: make_package() { local PACKAGE_NAME=$1 local PACKAGE_VERSION=$2 local PACKAGE_INSTALL_DIR=$3 local ...
user avatar
  • 133
1 vote
1 answer
4k views

RPC header not found despite being installed

I'm trying to install MB-system on my Arch Linux machine. I installed all necessary dependencies and have the package libtirpc installed. When running the configure script, it ends with: checking rpc/...
user avatar
8 votes
2 answers
9k views

How to solve Receive error: 10053 connection was aborted by the software in your host machine for folding@home?

I wanted to follow Nvidia's call to action to donate unused GPU computing power to fight against COVID-19 and installed the Folding@home Client at Version 7.5.1 on a Windows 10 x64 machine. My logs ...
user avatar
  • 1,680
0 votes
1 answer
455 views

Integrate Apache Drill with Apache Superset

I installed Apache Drill through the link in the Drill Documentation. Apache Drill works fine. I also installed and got Apache Superset running using docker. Superset also works totally fine. But my ...
user avatar
2 votes
1 answer
14k views

PHP 7.3.8. ZIP extension on MacOS Catalina 10.15

I’m trying to use the builtin PHP in MacOS Catalina 10.15 by compiling the ZIP extension by myself. In the new MacOS Catalina, the phpize tool is no longer usable since inside it contains an invalid ...
user avatar
2 votes
1 answer
33 views

bin file unavailable in Apache Drill

I installed Drill according to Drill Documentation. I have java installed. These are the steps I followed wget http://apache.mirrors.hoobly.com/drill/drill-1.16.0/apache-drill-1.16.0-src.tar.gz Then ...
user avatar
1 vote
0 answers
1k views

weblogic server 12.2.1.3.0 config.cmd did not work on windows 10

I am trying to setup weblogic server 12.2.1.3.0 on windows 10. I run fmw_12.2.1.3.0_wls.jar successfully. But when I try to create domain using config.cmd file, configuration wizard wasn't opened. I ...
user avatar
  • 11
0 votes
0 answers
29 views

The extra "2 q" in mysql.cnf

Show content in mysql.cnf file. cat /etc/mysql/conf.d/mysql.cnf [mysql] Show it with binary format. xxd /etc/mysql/conf.d/mysql.cnf 00000000: 5b6d 7973 716c 5d0a [mysql]. ...
user avatar
  • 53
0 votes
0 answers
162 views

Why is the libvo-aacenc / libvo_aacenc not found?

When using this https://libav.org/releases/libav-12.3.tar.gz library and running in the folder: "./configure --enable-static --enable-version3 --enable-libvo-aacenc" the error "ERROR libvo_aacenc not ...
user avatar
  • 1
3 votes
1 answer
1k views

Midnight Commander: configure error: S-Lang library version 2.0 or newer not found

Trying to update Midnight Commander to the latest version (4.8.23), I downloaded the corresponding tar.xz file from their website (http://ftp.midnight-commander.org/?C=N;O=D), extracted the files and ...
user avatar
0 votes
2 answers
54 views

Avoid recompiling with make after running configure

I have a program (ffmpeg) that I am trying to install. This is what I'm currently doing: Run ./configure with the desired options. Wait a minute or so. Run make. Wait 20-25 minutes. Get an error ...
user avatar
0 votes
1 answer
612 views

How to use Cunit with Mingw64 on Windows?

I'm trying to run some test on Windows, using Mingw64. I got Mingw64 with gcc 4.7 from rubenvb builds on sourceforge, and I additionally downloaded some Unix utilities from here: https://sourceforge....
user avatar
  • 1
0 votes
1 answer
152 views

What are ignored packages for?

I don't have any packages installed on my Sublime Text 3, yet I have this strange property in my configuration file. "ignored_packages": [ "ActionScript", "Vintage" ], Why is it there and ...
user avatar
  • 359
0 votes
1 answer
36 views

Trying to run another website on my Ubuntu 18 server

Currently, I'm running a website on my server called panel.0.net but I want to create a separate website on the server to take you to a page that says "Hello World" the way you'd get there is www....
user avatar
0 votes
1 answer
1k views

Building OpenFOAM-v1812 - configure error for ParaView

Can anyone help with an error on building OpenFOAM, a computational fluid dynamics package? This was on configuring the dependency ParaView with: ./makeParaView ~/OpenFOAM/ThirdParty-v1812$ ./...
user avatar
2 votes
1 answer
211 views

wrong dependency_libs in .la file after make install with DESTDIR flag

I am maintaining a locally-compiled version of gpg. The end result is supposed to be a standalone suite of packages living in /opt/local (with the standard tree under that base directory: usr/bin for ...
user avatar
  • 121
0 votes
1 answer
338 views

clang: error: no such file or directory: '_REENTRANT'

I am trying to install UDUNITS-2 package for the graphical visual browser: ncview. Can anyone help me understand the following error message: clang: error: no such file or directory: '_REENTRANT' A ...
user avatar
1 vote
1 answer
3k views

An issue with ncview (netCDF visual browser) on cygwin - windows 10

I have an issue with ncview on cygwin. Can anyone help? I have installed cygwin on windows 10 and followed the instructions on Ncview under Windows. my output from ./configure and make install are ...
user avatar
0 votes
1 answer
1k views

WINDOWS 7 | Backup & Restore | limit number of backups (quantity)

win7_6.1.7601.sp1 Control Panel\System and Security\Backup and Restore I ended up finding out the hard way that Windows 7's Backup and Restore is an essential function. Where a user can define ...
user avatar
  • 472
1 vote
1 answer
490 views

What is the default value for Options in Apache 2.4?

I wonder if the Indexes option is enabled or not. For my website, it seems the directory index is disabled because visiting http://example.com/dir/ returns 403 forbidden. But I do not remember I added ...
user avatar
  • 383
0 votes
1 answer
160 views

how to set environment variables CAIROMM_CFLAGS and CAIROMM_LIBS

While I remain ignorant how precisely Mac OS suddenly figured to find the dependencies (that was brew-installed) required to install graph-tool using conda install command... I further remain ...
user avatar
  • 121
0 votes
1 answer
568 views

Install OpenMPI on Mac OS 10.13.3 with gfortran

I installed gfortran with the dmg file available here, downloaded and unpacked the tar file available here, and then ran ./configure --prefix=/usr/local/. I get the following output when it tries to ...
user avatar
3 votes
0 answers
2k views

configure not finding ffnvcodec dependency

When running ./configure --enable-cuda --enable-cuvid --enable-nvenc --enable-nonfree --enable-libnpp --extra-cflags=-I/usr/local/cuda/include --extra-ldflags=-L/usr/local/cuda/lib I am met with ...
user avatar
1 vote
2 answers
246 views

Linux From Scratch [closed]

I am currently doing Linux From Scratch.I downloaded some packages.I unzip them using the "tar" command and do the following inside that extracted package: configure make make test make install One ...
user avatar
0 votes
1 answer
2k views

Nextcloud users' settings "Group admin for" - what is it?

I've just finished configuring a Nextcloud server running on Apache2. It's the latest version. This is the first time I set up such a server. While I was fiddling with the settings I created a non-...
user avatar
1 vote
1 answer
260 views

Synergy with 6 screens, how do I setup config

I have 6 screens, 2 rows of 3. My bottom layer of 3 screens are one computer (windows 7) Top left is my Mac Top Middle is Windows 10 Top Right is linux Currently my Synergy setup is just like a T ...
user avatar
2 votes
1 answer
2k views

How do you stop Excel from auto-replacing characters and sequences?

Excel, and I think most Office Products, have an obnoxious habit of replacing regular ASCII characters with obscure extended characters if it can, which renders the result absolutely useless to ...
user avatar
  • 131
2 votes
0 answers
2k views

RTNETLINK answers: Operation not supported

I am trying to create network and to add hosts with mininet but I got the error: sudo mn [sudo] password for udooer: *** Creating network *** Adding controller *** Adding hosts: h1 h2 *** Adding ...
user avatar
  • 31
0 votes
2 answers
3k views

./configure failed due to missing openssl although it is already installed

I am trying to compile a new package that is based on OpenWRT (it is some kind of a modified OpenWRT). During the ./configure proccess I am getting a fail due to OpenSSL that is missing but when I ...
user avatar
  • 111
2 votes
1 answer
6k views

error: zlib library and headers are required R on HPC

System: Red Hat Enterprise Linux Server release 6.5 (Santiago) I’ve installed zlib 1.2.11 on the home folder of a Red Hat HPC as part of the process for installing R base 3.4.0. I get this error ...
user avatar
3 votes
0 answers
1k views

How can I disable media keys processing in vlc media player?

The title is self explanatory. There is no such option in vlc settings though this page says that the configuration option for this option was added to gui in vlc-1.1.7. The page is quite old though.
user avatar
  • 193
0 votes
0 answers
386 views

How to satisfy configure dependencies?

This question is related to my other question configure warns that installed libraries are missing . That question was specific to xscreensaver, but this is a more generic question RE: configure using ...
user avatar
1 vote
0 answers
482 views

configure warns that installed libraries are missing

I hope this is an appropriate forum for this question. I'm trying to learn the "configure, make, make install" workflow that seems to be well-known Linux convention. I am trying to apply this to ...
user avatar
0 votes
2 answers
1k views

How to compile and install this source without errors? Link in the description

It's very important for me to install QCADesigner 2.0.3 on my linux system (Ubuntu 16.04). You can find the source here. When I tried to configure it by running ./autogen.sh as mentioned in the readme ...
user avatar
  • 23