Questions tagged [debian-buster]
Debian Buster is a development codename for the 10th of the Debian GNU/Linux operating system.
60
questions
0
votes
1
answer
94
views
alienvault installation fails with gvm setup errors in log
I'm trying to install the latest alienvault distribution and I've attempted installation on VirtualBox and ESXI both fail to complete the openvas GVM installation.
The first erros appear to be:
May 5 ...
1
vote
1
answer
49
views
Orange Pi Zero 2 Debian Buster 4.9.170 I2C hardware configuration issues
I have an Orange Pi Zero 2 and I am running Debian Buster 4.9.170. I am using Buster because of software functions to operate a MiniTiouner 2.0 Digital TV / HamTV Tuner board and LONGMYND Server / ...
1
vote
0
answers
73
views
dual boot debian and windows 11 with veracrypt
I have an hp laptop with windows 11 and whole disk encryption with AES using veracrypt, is there any way to have it dual boot with DragonOS (an sdr linux distro based on debian buster) without having ...
1
vote
2
answers
268
views
Directory contents not fully copied by scp command
I'm running Windows 10, and the server is on Debian 10 and I'm copying a Svelte build directory from my computer to a remote server. I'm using the command to copy the files:
scp -r ./build user@remote....
0
votes
0
answers
171
views
How to install tesseract-ocr in Debian 10
tesseract-ocr installation in Debian 10 Buster throws 404 errors.
Tried:
apt install tesseract-ocr
Reading package lists... Done
Building dependency tree
Reading state information... Done
The ...
0
votes
0
answers
46
views
I need help closing up some ports on a debian 10 server
I ran nmap on my server and i need help closing up a few ports
PORT STATE SERVICE VERSION
25/tcp filtered smtp
135/tcp filtered msrpc
139/tcp filtered netbios-ssn
445/tcp filtered ...
0
votes
0
answers
240
views
Black screen after logging in from terminal (Debian 10)
Nothing except for the mouse cursor was displayed on the monitor after I logged in from the keyboard. SSHed in I was able to see myself logged in from tty7. Restarting the display manager brought the ...
0
votes
1
answer
152
views
Does RNGD accept other entropy input with Debian11, kernel Debian-5.10.0-17?
Aug 06, 2022
I upgraded to the Debian-5.10.0-17-amd64 kernel recently and was not impressed. I regressed back to the Debian-5.10.0-9-amd64 kernel.
Under the '9' kernel, I run a script that cat's ...
0
votes
0
answers
226
views
Connect Debian 11 with OpenVPN to company VPN server
I'm having to work from due to testing positive with covid, and I need to set up openvpn on Debian 11; frustratingly, there doesn't seem to be any useful information online about how to do this. What ...
1
vote
0
answers
122
views
switch pro controllers bluetooth raspberry pi steam link not working
I have the following setup:
3 switch pro controllers paired with blueman bluetooth
Raspberry Pi 4 Model B Rev 1.2
Raspbian GNU/Linux 10 (buster)
latest steam link to my windows 10 pc
as long as I ...
0
votes
1
answer
144
views
Compile FFMPEG RTMP
I'm trying to use RTMP protocol on homebridge server (Debian 10). I am following this tutorial:
https://sunoo.github.io/homebridge-camera-ffmpeg/configs/Reolink-camera.html
But when I tried to ...
0
votes
0
answers
161
views
No XFCE Animated Resource Monitor available
I am running the latest version of kali (Debian Based OS) with XFCE on my laptop (not VM), please see further info below.
When using a VM version for work I am able to see an animated CPU usage in the ...
1
vote
0
answers
225
views
MySQL refuses to start on my Debian 10 server after a botched control panel installation attempt
Context
After two failed control panel installation (tinycp and cloudpanel) attempts and a restart the MySQL service (Community version 8.0.27) is not starting.
When trying to restart the service, it ...
0
votes
0
answers
153
views
http://ppa.launchpad.net/ondrej/pkg-gearman/ubuntu impish Release 404 Not Found
Hi I have a linux server (debian 10 buster) w
after typing the command: sudo apt-get update for updating
there was en error shown :
Hit:1 http://deb.debian.org/debian buster InRelease
Hit:2 http://deb....
0
votes
0
answers
48
views
Philosophy of virtualenv
Can somebody explain the philosophy of virtualenv?
I fully understand how it works - if I use scripts by hand. I've to enter to some folder, run virtualenv and do what I want in secure environment. ...
2
votes
1
answer
5k
views
What does 512e/4Kn mean in a hard-drive specification?
While shopping for hard drives (in the range of 8TB to 12TB) to add to my file server (running Debian 10), I'm puzzled by the 512e/4Kn in the specs (for example, this Seagate model). My understanding ...
0
votes
1
answer
300
views
How to create new users in home partition?
I reinstalled Debian 10 on my computer where my home users directory is in a separate partition. Then I mounted automatically adding the last line:
# <file system> <mount point>...
1
vote
1
answer
551
views
Is it safe to install Ubuntu's .deb packages on debian? Are .deb packages universal?
Case in point, AppImage Launcher
I wanted to install the .deb package for it but they only had options for bionic and xenial. I am running debian 10 buster. So I wasn't sure with how unstable linux is,...
8
votes
2
answers
4k
views
git on Debian 10 backports throws fatal: unable to access 'https://github.com/user/repo.git': Failed sending HTTP2 data
As of yesterday, after updating my Debian 10+bpo system, whenever I try git clone, git fetch, or any other git operation that relies on network, I get fatal: unable to access 'https://domain.example/...
-1
votes
1
answer
138
views
404s don't have trailing slashes
I have set up my site so that if someone tries to look at forbidden content they will get a 404 error instead of a 403, but when they do this, a trailing slash is added to the end of the URL. Also, if ...
2
votes
1
answer
3k
views
Grub2/Debian10 change root partition on boot
I have a headless NAS system that ran out of disk space on it's system partition. It's running Debian 10, usually managed via OpenMediaVault 5 with a grub2 bootloader on an EFI system. Apart from the ...
0
votes
1
answer
32
views
Youtube Crashes the entire computer and it will not boot up again
I was watching youtube when the computer freezes and a turned it on and it crashed while watching Youtube again.
So I left it off overnight and in the morning it does not boot and has a blank screen ...
2
votes
2
answers
4k
views
grub-install: error: embedding is not possible, but this is required for RAID and LVM install
On a Debian 10 (buster) system I've just tried to install the recent grub-pc update and for the first time I received this error:
Installing for i386-pc platform.
grub-install: warning: your core.img ...
1
vote
0
answers
817
views
VMWare no sound
I have Debian Buster amd64 installed as guest in VMWare Fusion on Big Sur host. My problem is, I do not get any sound.
Sound output in principal should work (I also have a Win7 guest with working ...
2
votes
2
answers
234
views
Why installed part of vim instead of entire diectories?
I find that part of vim installed with the command:
sudo apt install vim
Check all directories whose path contain vim.
sudo find / -name vim
/etc/alternatives/vim
/etc/vim
/var/lib/dpkg/alternatives/...
0
votes
1
answer
577
views
Overriding udisks2 /media/$USER/mount with custom fixed mount point for specific volume, under Debian Buster
I am using Debian Buster, 10.7, and I am relatively new to udev/udisks2/systemd and have been making a effort to get to know them better and have learned quite a lot, though I cannot seem to figure ...
1
vote
1
answer
449
views
Debian: `Suspend` does `Logout` instead of `Suspend`
Today sudenly when i tried to Suspend it logged out instead of suspend. I've tried many different things but, couldn't get suspend to work again; viz.
sudo mask suspend.target > restart > sudo ...
0
votes
1
answer
600
views
E: Unable to locate package firmware-b43-installer?
I have a laptop that I installed Debian(buster) onto that has no GUI also known as (CLI). But for some reason, I can't install firmware-b43-installer it comes up with this error (E: Unable to locate ...
0
votes
3
answers
3k
views
APT: How to install recommended dependencies and not auto-remove them until the installing package is removed
Imagine a package foo that has a recommended dependency bar and a suggested dependency baz. How do I configure APT for the following behavior?
apt install foo: installs foo and bar; does not install ...
0
votes
0
answers
224
views
usbmount does not unmount vfat mount point
I use usbmount to automatically mount usb drives. Everything works fine for my external SSD with four NTFS partitions. They are mountend when the external drive is connected and automatically ...
3
votes
2
answers
1k
views
Where is the sudoers file on Debian 10?
There is a server that was setup a while back, and I need to change a few settings, one of which is a user with super user privileges. However, everywhere I look tell to use visudo, or edit /etc/...
1
vote
1
answer
534
views
LXDE Authentication Required for shutdown when logging in using NIS
This problem is solved, but I wanted to document it so I am able to find it again the next time. And for the benefit of other users.
Debian 10 Buster
4.19.0-12-amd64
LXDE
Systemd
This error message ...
3
votes
1
answer
1k
views
How to update BIOS on Acer SF314-42 without Windows installed?
The official website has a new version of BIOS for my laptop. The download from the website is a zip archive, which contains an executable and a README.txt, which instructs to click the executable ...
0
votes
0
answers
216
views
Installing Debian buster 10.5 on VirtualBox 6.1
I would like to install Debian buster 10.5 on VirtualBox 6.1.
I have the virtual machine booting from the netinst iso but after choosing graphical install the VM's screen goes black and nothing ...
1
vote
2
answers
3k
views
How can I get ChromeOS/Linux to play nicely with localhost, VirtualHosts and local storage?
I'm pretty new to Linux and using localhost having really only developed using a self hosted, browser based IDE on a live site up until now. Using a Chromebook(v84, regular channel, Debian 10 Buster), ...
0
votes
1
answer
3k
views
IPSec nftables strongswan
How to configure nftables to allow inbound only ipsec traffic and process rules after decryption. I have nftable.conf:
#!/sbin/nft -f
flush ruleset
# ----- IPv4 -----
table ip filter {
chain ...
0
votes
1
answer
1k
views
trying to install wine5 on debian 10: "unmet dependencies: winehq-stable : Depends: wine-stable (= 5.0.1~buster)"
i want wine5 on a brand new debian 10.5 system,
i followed the instructions here https://wiki.winehq.org/Debian ,
sudo dpkg --add-architecture i386;
wget -nc https://dl.winehq.org/wine-builds/winehq....
0
votes
1
answer
49
views
How can I get Debian 10 ssh to recognize my keypair?
I have a new Debian VPS, and I am able to access it but need to give my password on entering. After some simplification, I have ~/.ssh/id_rsa and ~/.ssh/id_rsa.pub on my computer, with the server ...
3
votes
2
answers
9k
views
wlan0 ethernet unavailable / GENERAL.STATE 20 (unavailable)
When waking from sleep, sometimes my Linux laptop won't reestablish it's Wi-Fi internet connection.
Interestingly, rebooting fixes it, although it's kind of a pain to have to do a full shutdown/reboot....
0
votes
0
answers
423
views
Unicode Characters and some fonts cant be seen in installed third-party browsers in Debian 10 Buster
I have a laptop running on Debian 10 Buster. However, I am unable to view Unicode characters and some fonts in Chrome browser and Opera browser. Nevertheless, I am able to view Unicode characters in ...
0
votes
2
answers
2k
views
I couldn't update on Debian 10 using sudo apt update
Hit:1 http://download.opensuse.org/repositories/home:/strycore/Debian_10 InRelease
Ign:2 http://download.opensuse.org/repositories/home:/strycore/Debian Buster InRelease
Get:3 http://deb.debian.org/...
3
votes
1
answer
155
views
nouveau: Where are module parameters stored?
I have been trying to debug a bug with nouveau and I would like now to remove the previous setting.
Here is what I see:
% dmesg | grep nouveau
[...]
[ 1.487361] [drm:nouveau_drm_init [nouveau]] .....
0
votes
1
answer
184
views
Debian 10 won't boot after installation on Lenovo ideapad 100S-14IBR
I tried installing Debian 10 on my Lenavo ideapad 100S-14IBR laptop. However, I am not able to boot the OS when starting up. I was able to get some pictures of the startup. Please find them below. ...
2
votes
2
answers
15k
views
How to install the intel wifi 6 ax200 driver to Debian buster?
I need to install the intel wifi 6 ax200 driver but have never actually installed a driver on Linux. I have the driver downloaded on my system, and it's on the name: iwlwifi-cc-a0-46.ucode. Along with ...
9
votes
2
answers
14k
views
Force to use MAC address as DHCP client ID on Debian Buster
Debian Buster dhclient randomly uses its MAC address or a generated DUID-LLT as its DHCP client ID.
Can I force it to always use MAC address instead of the generated DUID-LLT?
I know the option send ...
0
votes
1
answer
2k
views
debian bind load zone permission denied
I have bind9 installed on Debian 10. It can't load created zone xxx.yy with error: loading from master file /etc/bind/zones/db.xxx.yy failed: permission denied
/etc/bind/zones is mounted to fresh ...
0
votes
0
answers
149
views
Unable to boot 64-bit kernel after installation
My system supports 64-bit architecture and I am able to use debian-buster meant for amd64 architecture separately. Now, I have an os running debian-buster having kernel as "linux-image-686-pae". I ...
2
votes
1
answer
3k
views
Logout, Shutdown and reboot freezes Debian 10 Buster fresh install, while for Stretch it worked fine
Fresh install from net-installer amd64, KDE as Window Manager, unencrypterd boot, encrypted LVM over LUKS2, and a Win10 as dual boot.
All works fine so far, except whenever I try to logout from user,...
0
votes
0
answers
631
views
Tor Error: bind: cannot assign requested address
I config a tor bridge on Debian 10. it did work well but now it will show this:
Mar 04 22:09:50.603 [notice] Tor 0.3.5.8 running on Linux with Libevent 2.1.8-stable, OpenSSL 1.1.1d, Zlib 1.2.11, ...
2
votes
1
answer
2k
views
Debian 10 stopped on reboot after "Reached target system time synchronized"
I have a Debian 10 virtual server and I have removed ufw and iptables and rebooted the machine. Upon start, the system pauses at the Reached target system time synchronized line.
After few minutes ...