Questions tagged [dynamic-dns]

Dynamic DNS about asking how to configure Dynamic Domain Name System services

Filter by
Sorted by
Tagged with
0 votes
1 answer
145 views

Registering OpenVPN client addresses with DNS

I am running OPNSense on my home router and have configured OpenVPN on the device, allowing me to connect to my home network from anywhere in the world. I am also running a BIND DNS server on my home ...
user avatar
1 vote
0 answers
86 views

Outside Access via IPv6 and DSLite

I am using Vodafone Germany, which provides IPv4 & IPv6. IPv4 is provided via DS-Lite Tunnel. I have also set up DuckDNS (Dynamic DNS) for a raspberry in my network. Let's say my hostname is ...
user avatar
  • 111
0 votes
0 answers
47 views

How do I use Domain Name to Dynamic DNS to Home Server using SSL

**Looking for tips here since I have not had success using SSL. I have had success using non-SSL (ie port 80). I want to use a sub-domain name of a domain I own. I can use A or CNAME or URL forwarding ...
user avatar
1 vote
1 answer
105 views

How to consolidate local DNS from multiple routers and multiple DHCP servers?

I have a private network with several OpenWrt routers connecting some local subnets. I use NAT on a couple of the routers to give access to the internet via different providers. I run a local DNS ...
user avatar
  • 169
0 votes
2 answers
440 views

I have configured DDNS in my Tp-link router with No-IP, how do I get to my router's settings page from my No-IP account

As I mentioned in the title, and according to what a friend of mine told me, that if I linked my router using the DDNS feature, I can get access to it just from my DDNS Provider account. I have done ...
user avatar
0 votes
0 answers
29 views

Double NAT with DynDNS using HikVision NVR

I'm currently using DynDNS to access a router remotely via "xyz.dyndns.com" and that works beautifully. That router has firewall port forwarding rules to access a HikVision NVR which is ...
user avatar
-1 votes
1 answer
86 views

Dynamic DNS Redirecting to Router

I am trying to create a website and I am using my PC to run XAMPP and noip to get a domain, but whenever I go to my noip website, it redirects to my router configuration page. My router is Calix 844E.
user avatar
0 votes
2 answers
111 views

does AWS Route 53 have a service like DynDNS or No-IP?

I do local dev on an application that Twilio occasionally needs to make HTTP requests to. To facilitate this I have local.mydomain.com pointing to my computers IP address as it resolves to the outside ...
user avatar
  • 5,970
0 votes
0 answers
82 views

Ddclient setup issue: external IP

I'll describe what I have setup as best I can: I've got a raspberry pi setup as an Apache2 web server running ddclient. It's connected to my Xfinity router, which is setup to port forward to the Pi at ...
user avatar
  • 1
0 votes
0 answers
31 views

No-IP, Apache: Can't load page from the server that hosts it

I have a domain name registered at No-IP, and in my server I run Apache2 and a site made with python and flask. Also, I have my router configured to forward the port of interest. When I try to access ...
user avatar
  • 5
0 votes
1 answer
182 views

Specification of DDNS update protocol

Where can I find the protocol specifications for updating a dynamic DNS server? In D-Link routers, there're hardcoded options for dyndns.com and no-ip.com. There's also a Manual option where the ...
user avatar
  • 1,099
4 votes
2 answers
4k views

How to publish IPv6 on duckdns

My ISP recently started providing IPv6. I have a Raspi with PiVPN at home and like to be able to reach my LAN when I am away. I have been using DuckDNS for years now and for IPv4 it worked great. ...
user avatar
  • 360
0 votes
1 answer
462 views

Notify of dynamic ip address changes?

I have full remote access to a router however from time to time the ip address changes and thus I lose my ability to connect remotely because I no longer know the ip address. So I want to be notified ...
user avatar
  • 13
1 vote
1 answer
30 views

Hosting several applications from home

I'm hosting several applications from home. My current "dirty" solution is, to forward multiple ports in my router. Downside is, I have to remember which ports serve which application. Plus, ...
user avatar
1 vote
2 answers
402 views

is that possible to ping a router with DynDNS name?

my goal is to set up VPN Server on the remote router and connect to it via WWW with a VPN Client. To avoid fixed public IP I use DynDNS service (no-ip) and it seems it is working (I see both in noip ...
user avatar
0 votes
1 answer
62 views

2 DDNS 2 routers 2 web servers 1 issue

Please have patience and if you answer please explain like you would explain a moron. This is my setup. I have 2 routers: Router 1 is PPOE and connected with a NUC server and Dynamic DNS from NoIP. ...
user avatar
0 votes
0 answers
229 views

Dynamic DNS and URL really slow to load from the internal network

I have a Docker Nextcloud instance running on my PC where I configured it in a way that the application server running upon it points to https://myid.duckdns.org:1234. Of course the duckdns.org client ...
user avatar
  • 283
0 votes
2 answers
461 views

Enabling dynamic DNS updates in iptables

I have a Debian machine behind a wifi router. The machine is running a cron script to restore connectivity whenever a ping to a pre-defined host fails. I have set up iptables so that only the required ...
user avatar
  • 21
0 votes
1 answer
934 views

How to make my own Dynamic DNS Server?

So, here is the thing. I have a server with static IP and a domain (example.com), and I have some other servers with changing locations and dynamic IPs and no domains. I wanna give them my subdomain (...
user avatar
0 votes
0 answers
28 views

My dynamic dns behaves weird

I have builded a raspberry pi ubuntu all-in-one server (ftp, apache, ssh, vnc) and used dynamic dns to be able to use it remotely. When i try to connect it from lan ip it connects successfully from my ...
user avatar
0 votes
1 answer
648 views

FRITZ!Box DynDNS w/ dynv6.com not updating prefix

I can configure dynv6.com in my FRITZ!Box with german tutorial from here: fritz!box configuration as soon as my router gets a new prefix in the night I cannot access my fritz!box and exposed host ...
user avatar
  • 101
1 vote
1 answer
793 views

How can I set up custom Dynamic DNS on a ZyXel VMG3925?

I have a ZyXel VMG3925-B10C router, which I'm trying to set up with DNS Made Easy. The standard URL syntax for this is https://cp.dnsmadeeasy.com/servlet/updateip?password=mypass&id=1007&ip=...
user avatar
  • 6,700
1 vote
1 answer
2k views

How do I use dynamic IP for a server? [closed]

For people who work for servers or have knowledge on it. Is it possible to use a dynamic ip address for a server? If yes, what the cons of doing it? Is it dangerous to use my personal computer in ...
user avatar
  • 13
0 votes
0 answers
1k views

SSH Permission denied (publickey,password) from internet

I´d been successfully connecting through SSH into my Ubiquiti radios (5 of them) through internet (DDNS) for a while but since a couple weeks ago with the exact same credentials I can´t, only one of ...
user avatar
1 vote
3 answers
1k views

I want to cut out "no-ip" et al, is GnuDIP what I need?

Currently i am using "no-ip" for a .org domain, this resolves to my own, dynamic IP address and finally to an Apache server on Debian. I got the domain from google domains, then used no-ip as a ...
user avatar
1 vote
1 answer
177 views

Connecting to Raspberrypi from external network

I have a raspberry pi and a 2TB NAS attached to it. My ISP sets a dynamic IP address every time I log in to it but I am behind a NAT that gives me a private IP address instead of a public one. My goal ...
user avatar
  • 145
0 votes
2 answers
968 views

Can I use a dynamic DNS server like DynuDNS and use it to host a domain name under something like Namecheap?

I'm a bit jumbled up with this dynamic DNS thing and how it works, so say I have a domain name with namecheap (domain.com) and I want to use a dynamic DNS to sync my dynamic IP, would i need to make a ...
user avatar
  • 1
1 vote
1 answer
182 views

Dynamically-linked DLZ modules in BIND9

BIND9 allows you to link dynamically loadable zone (DLZ) modules at runtime using the dlopen driver. The unit test for this functionality passes for my environment, but when I try to run named with ...
user avatar
1 vote
0 answers
638 views

How to setup Synology mail server (not MailServerPlus) under noip.com

I have Synology server running with router Netgear R7000. R7000 has a domain register under noip.com with domain: hello.ddns.net. I want to setup MailServer (not MailServerPlus which is paid server) ...
user avatar
0 votes
1 answer
420 views

How to tunnel DDNS domain with SSL through a VPS to IPv6 host (Raspberry Pi)

I am working on reaching my Raspberry Pi, which is running behind an IPv6 router, with HTTPS working. I am very confused, because HTTP is working at the moment. So my setup looks like this: mydns....
user avatar
  • 101
2 votes
2 answers
6k views

How can I whitelist my IP address for my company’s needs when my ISP provides with with a dynamic IP address?

I am working from home and my company needs to whitelist my IP. Obviously, my ISP’s assigned external IP changes as often as the sun comes up. I am looking for a solution how to go around this. I ...
user avatar
3 votes
2 answers
2k views

How to force hostname to resolve to local address instead of public address?

I have a linux server on my home network which uses Dynamic DNS provided by noip.com, and a corresponding hostname "xxxx.hopto.org". From outside of my network, say, at a coffee shop, I can use this ...
user avatar
1 vote
0 answers
165 views

Can't connect to Remote Desktop over the internet while VPN is active

I have my personal computer in my home which I have to connect from my laptop at work, I setup it everything to be able to connect over the internet with Dynamic DNS or the external IP, and it works ...
user avatar
  • 11
0 votes
0 answers
355 views

Reverse Proxy from my domain to my PC - How To?

I am not asking this 'how to' as if its possible or as if a problem has developed. Many of the similar questions are looking for a solution or a way to extend it. My question is more practical in ...
user avatar
  • 713
0 votes
1 answer
1k views

Cannot access nextcloud home server behind pfsense firewall, via ddns (no-ip, pfsense, ExpressVPN)

Having some trouble setting up access to a nextcloud server on my local network. Feeling a bit lost tbh. I want to access the server from outside the local network i.e. internet. The server is ...
user avatar
  • 135
0 votes
1 answer
2k views

NAT loopback and DynDNS

I've successfully configured DynDNS in my router and now I'm able to reach my home server from outside my local network using my custom domain. Using the very same domain I'm able to reach my home ...
user avatar
  • 103
0 votes
1 answer
111 views

Few queries regarding DNS record management

I recently purchased a domain, karthikts.com(just for example but this is not the actual domain registered) and on the registrar(crazydomains.com) dashboard i could see below configs: I have been ...
user avatar
0 votes
0 answers
105 views

Linux Server with DynDNS - Can only access in same network, not via web

I want to make my Linux server accessible via Internet. I can access the Server from network via FTP (WinSCP), can connect the running MySQL Database on Port 3306 and can access the running REST-...
user avatar
  • 1
1 vote
0 answers
85 views

Linux mint ddns and iptables ssh,ftp connect

I have a 3g usb modem connected via usb to the PC. Dynamic ip. I need to connect to this PC as a server via ssh or ftp. As I've read on the Internet, I need: Configure Dynu Dns, in order to track the ...
user avatar
0 votes
1 answer
589 views

Using non-static IP computer as a Proxy server

I have a Windows 7 computer connected to a Verizon T1114 router. This router allows me to get a new IP address at will simply by logging into the router and rebooting it, since this router is ...
user avatar
0 votes
1 answer
5k views

How to secure dynamic dns home network computer? [closed]

I have read a number of articles on setting up a dynamic DNS using my web hosting provider to point towards my home network. This would then allow me to access my Ubuntu server on my home network ...
user avatar
  • 101
0 votes
1 answer
461 views

Local server works from duckdns but just in locak network

I've put a local web server in my local Windows 10 desktop machine. I've also setup a dynamic DNS using duckdns.org. Now if I try to connect to it from my mobile phone using myserver.duckdns.org and I'...
user avatar
  • 419
0 votes
1 answer
735 views

Access Hard Disk drive hooked on router remotelly

I have a created a DynDNS domain in bounceme.com. I have connected the hard disk on my router via usb, the domain in bounceme.com goes to the router interface. But I have no idea how I can access the ...
user avatar
  • 101
1 vote
1 answer
504 views

DynDNS CNAME Best practice

I have a DynDNS account with sub.somedyndomain.com. In an ideal world I would have sub.example.com (where I run example.com) functioning the same way as a dyndns, I have a BIND server running on a ...
user avatar
  • 138
0 votes
2 answers
186 views

Can't get port forwarding to work

I want to access multiple ESP8266 in my home network from an outside network. The problem I'm facing is, although I've forwarded some ports on my router I'm not able to access it from outside ...
user avatar
  • 1
0 votes
1 answer
452 views

How to tell if a website is using shared hosting or just masking IP address?

When I do a reverse lookup on a certain website, it returns a Dyn IP as below: C:\Users>nslookup xyz.com Server: UnKnown Address: 192.168.1.1 Non-authoritative answer: Name: xyz.com ...
user avatar
0 votes
1 answer
1k views

Can't see my webserver from outside my local network with DynDns enabled

This is supposed to be a really simple example for learning purposes, but for some reason is deciding not to work. I set up an Apache web server on my Linux box with just a dummy page. Works great ...
user avatar
0 votes
3 answers
893 views

Two distinct public IP addresses keeping dynamic DNS and port forwarding from working?

I use dynamic DNS to point my domain to my home IP address and then, in the ISP modem, I forward ports 80 and 443 to my home web server. However, I'm apparently dealing with two distinct public IP ...
user avatar
  • 3
1 vote
3 answers
13k views

How to configure duckdns.org on OpenWRT?

I want to configure my OpenWRT router to update dynamic DNS once each day. I've chosen to use the free www.duckdns.org service. The duckdns service is not in the list of pre-configured services. How ...
user avatar
  • 877
0 votes
1 answer
75 views

Using IP as a dynamic DNS for another IP

Can I use an IP as dynamic DNS for another IP? I explain: I normally use http://freedns.afraid.org to have a dynamic DNS updated with my current local IP (which is dynamic); then mine XXX.XXX.XXX.XXX ...
user avatar
  • 35

1
2 3 4 5