Questions tagged [raid-0]

Redundant Array of Independent Drives or Redundant Array of Inexpensive Drives also known as RAID is a way to create a sub-storage system comprising several individual discs. RAID-0(also know as striping) is the level of RAID technique used to improve read performance. Over this configuration the data are subdivided into consecutive segments (stripes, or bands) that are written sequentially through each of the disks of an array or set.

Filter by
Sorted by
Tagged with
0
votes
0answers
20 views

Why can't I add SATA drive to windows storage space?

I have 3 drives, 2 are NVMe m.2 and 1 is SATA typical hdd. I can create a space with the first 2... But when I try to either create it with the HDD or add the HDD I get operation not supported... ...
1
vote
0answers
20 views

mix SATA 3 and SATA 2 HDD in RAID 0

I have MegaRAID 6Gb/s RAID controller (LSI 9261-8i). Now I have an RAID 0 array that consists from 4 reliable enterprise server HDDs (WD Re) that support SATA 3. I need to extend this array (to ...
0
votes
1answer
35 views

How to Partition a Single HDD With Hardware RAID 0

I have one SSD and one 10TB HDD. All the OS stuffs (e.g. /, /root, /var, /usr, etc) are on the SSD. And for a very dumb reason, I have to attach the 10TB to a RAID card (LSI MegaRAID SAS 9260-8i). ...
0
votes
0answers
24 views

Disable Raid 0 on Windows 10

I recently purchased a new laptop, this one When I ordered it, I didn't notice that this two SSD were in Raid 0. I'm not confortable with using such storage mode for all my data because of my usage of ...
1
vote
0answers
26 views

Replace a Raid 0 Disk (Software Raid/Windows)

I would like to know if it is possible, to replace a Disk in a Windows Software Raid 0. (e.g. clone the disk to another one inside the OS) I have seen another post where this question was asked, but ...
0
votes
0answers
35 views

Why does turning AMD RAID on corrupt last partitions on disks?

Just upgraded my mobo from Z87-PLUS to X570-E. Coming from Intel I noticed the RAID works a little differently, having all SATA ports configured as RAID, not just a few. On the old system I had 2 HDDs ...
1
vote
0answers
24 views

AMD Raid and Dual Boot

I've just upgraded my PC with a new Ryzen processor and a B550M Motherboard. I use this computer for both gaming (in a Windows-dedicated SSD) and working (in another Linux-dedicated SSD). I also have ...
0
votes
0answers
38 views

Acer Predator Helios 300 (2019): Getting rid of RAID0

I just bought a new 1tb Samsung Evo 970 SSD and installed it. But I foolishly created a RAID0 with the already provided 256 gb ssd card the laptop came with. How would I get rid of the RAID0? I’m not ...
2
votes
0answers
1k views

What are the pros/cons of SSD vs RAID 0 in the alienware laptops? [closed]

I'm considering purchasing a new Alienware laptop for my software development and testing work. I'm looking at the M15 R3. I'm hung up on the hard drive choices. The Dell config page give 2 choices: ...
1
vote
2answers
30 views

Can a single drive RAID 0 be converted to a standard drive?

A while back I set up a single drive in RAID 0 on a RAID card. I now want to switch my card to HBA mode. Will my RAID 0 drive read as a standard drive or will the data be lost?
0
votes
0answers
65 views

Is it possible to collapse RAID 1+0 to RAID 10 (single layer) with mdadm?

I've created two RAID 1 arrays and combined them with a RAID 0, and I recently read that mdadm also supports a one-layer-solution for that, is it possible to convert my setup into the one-layer-setup ...
0
votes
0answers
53 views

Replacing CMOS battery affect to the RAID controller?

Recently I replaced my graphic card and the BIOS does post with FF status code but in the step of Verify DMI Pool Data hangs. I'm thinking remove de CMOS battery for reset de board but I have a RAID 0 ...
0
votes
0answers
55 views

How to clone a single SSD to a 2 SSD RAID0?

This is the opposite to this: How do I clone a RAID 0 array to a single disk? I have a single SSD of 128GB, and I want to move it to 2x240GB SSD in RAID0. The reason: My windows is installed in ...
0
votes
1answer
27 views

Mobo dead, how to access striped volume externally from laptop?

I have a dead PC with 2 data drives that are windows striped (not hardware raid-0). If I buy a usb raid enclosure, do you think windows will recognize them as a dynamic disc? If not, is there a way to ...
1
vote
1answer
443 views

Remove RAID-0 from two NVME drives to dual boot win10 and Ubuntu

I currently have two Samsung EVO ~500GB NVMe drives running Windows 10 in RAID-0. I would like to remove the RAID-0 configuration and use one of the disks for Ubuntu 18.04 while the other disk remains ...
0
votes
1answer
32 views

Raid Controller doesn't work after installing

This controller actually caused multiple problems. First, the AMI-Bios had a constant beep, where the internet says it's a power adapter problem. After some time, the Bios worked and didn't beep ...
0
votes
0answers
71 views

Why Raid 1 don't improve read performance like Raid 0?

It should be able to read the data across the 2 disks like with Raid 0 right? but when I look at benchmark it looks like only one drive is used to read the data. https://raid.wiki.kernel.org/index....
1
vote
0answers
255 views

Restore RAID 0 with one member disk having been written to

Due to a bad overclock I had to reset my CMOS. This caused my RAID 0 to show up as "failed". One disk was detected as member the other detected as "Non raid disk". I have no reason to believe that the ...
43
votes
4answers
9k views

Is there a RAID 0 Equivalent for RAM?

With hard drives, you can put them in a RAID 0 configuration to split data between drives to increase read and write speed. Is there an equivalent of this for RAM? If I have 16 GB of memory, for ...
0
votes
0answers
60 views

Backup raid 0 to multiple smaller drives

I have 4 4TB external USB drives in a raid 0 set (created with btrfs). I have another 4 4TB external USB drives not in a raid set. What would be the best solution to backup the raid set to the 4 ...
0
votes
1answer
178 views

How to create raid1 mirror for existing mdadm raid0 - without overwriting data

I created a /dev/md1 raid0 across two drives, added ext4 filesystem, and it's mountable and working fine. I created a /dev/md2 raid0 across two drives, added ext4 filesystem, and it's also mountable ...
0
votes
1answer
75 views

Combining SSDs using RAID-0

If I have 2 SSDs via SATA3, both reaching speeds of about 500MB/s, which is close to SATA3 limit, does it make sense to combine them using RAID0? I mean if the SATA3 chip can provide the 6Gb/s speed ...
0
votes
0answers
313 views

Fake RAID 0 - Data recovery under Linux - 2 HDDs with Windows 10

I suspect someone at the company decided to do a partition span, i.e.: (taken a look from Linux Debian 9) Drive #1: Disk /dev/sdc: 465.8 GiB, 500107862016 bytes, 976773168 sectors Units: sectors of ...
0
votes
2answers
30 views

Does setting RAID disks require all disks to be in RAID?

I am interested in running a PC this way, 1 C: main OS drive and 2 2TB +2TB in RAID 0 Windows is already installed and I wanted to add the disks later. Do I have to reformat C: to RAID to be able to ...
0
votes
0answers
939 views

Setup RAID 0 for an Asus Zenbook UX301i

I've been asked to format and install Linux on the laptop, which has two 128gb SSDs. ASUS suggest RAID 0 is fast, so I want to setup the laptop, as is, but with Linux Mint installed. https://www.asus....
0
votes
1answer
305 views

Do 7200rpm & large cache HDD make a noticeable difference in a RAID 0 for 4k video editing?

For large file 4k video editing, is a 7200rpm drive worth it in a RAID 0? 2x4TB drives (possibly 2x6TB) RAID 0 in a Thunderbolt 3 enclosure 7200rpm or 5400rpm? Drawbacks being cost, heat, noise, ...
3
votes
1answer
599 views

Does RAID 0 increase the latency of the volume on HDD? [duplicate]

I will add a new HDD to my computer (identical to the old HDD). I'm wondering if it's a good idea to do a raid 0 vs using the two drive separately. How much it impact the latency and the performance....
0
votes
1answer
2k views

Raid 0 life expectancy and how to access 2 disks from Raid 0 outside of original computer

Two questions about Raid 0: My situation: My motherboard with RAID controller got sent in for an RMA (3 weeks turnaround). Asus sent me back a different motherboard that had way worse problems than my ...
2
votes
0answers
1k views

Recovering a Synology Raid 0 from Ubuntu (Healthy drives)

I am trying to remount a Synology raid 0 with 3x2GB drives. As far as I know, the drives are in healthy condition. I simply don't have enough space to do a full image of these before I proceed, so I ...
0
votes
2answers
307 views

What happens when you remove a drive from linux raid?

I have a home media server that gave me a message today saying one of the drives is soon to fail (not happy, still under warranty, that's another issue) I am running Mdadm raid 0 on a 3 drive system ...
1
vote
1answer
740 views

Server 2016 Storage Spaces and NumberOfColumns

I think we all know about the NumberOfColumns issues: https://blogs.technet.microsoft.com/tip_of_the_day/2015/03/17/tip-of-the-day-numberofcolumns/ That said, let's pretend to plan the following (at ...
1
vote
0answers
35 views

Disconnected Raid 0 drives now cannot see drives

I stupidly disconnected a RAID 0 drive while checking the information on the HDD (while it was turned on) and was not able view the drive again in disk manager. I then disconnected all the 4 drives on ...
1
vote
1answer
552 views

Mount existing 2-HDD RAID 0 on a new machine

Last week, my graphics controllers burnt (after 7 years of loyal service), well, my laptop (Clevo x7200) is now out of usage. On this laptop I have two disks mounted on a RAID 0. Disks are OK and ...
0
votes
1answer
66 views

Is there a way to determine what RAID-type I am using?

I've recently set up RAID 0 with two disks. I've done that via my Asus Prime X370 Pro's UEFI. Today I stumbled upon the terms "Software RAID", "Hardware RAID" and "Fake RAID". Most of the sources ...
0
votes
1answer
40 views

Restoring raid 0

I have a Velocity Duo (PCI raid card) with two Samsung 850 drives (500gb ea) in a RAID 0 setup in my Mac Pro. The raid controller seemed to get scrambled and the drive is no longer accessible - Mac ...
1
vote
1answer
789 views

Problems installing windows 10 on Asus ROG G752VS OC edition with m.2 RAID0 boot

I'm having trouble installing windows 10 on my Asus ROG G752VS OC edition laptop with two 512gb WD black PCIe NVMe drives installed and configured in raid0. I installed the drives and went into the ...
2
votes
2answers
854 views

Recovering data from a dismantled raid 0

I have a QNAP ts-212 2 bay enclosure, until recently it housed two 3TB drives in a RAID 0. I have just swapped the drives to two 5TB drives in RAID 0, my backups appear to be missing a couple of ...
0
votes
1answer
785 views

How does the mdadm Chunk parameter translate to SNIA definitions?

The manpage for mdadm describes a -c, --chunk= parameter, quoted below, that seems to relate to the RAID 0 stripe size. However, the SNIA definition of the parameters for RAID 0 is not a single value,...
0
votes
1answer
281 views

Ubuntu ldmtool not showing windows RAID-0 drive

this used to work for me, but I've re-installed Ubuntu and now am not getting anywhere. I have a dual-boot windows/Ubuntu machine. From windows I can see my RAID-0 drive, but when I use "sudo ldmtool ...
0
votes
1answer
527 views

Mint 18.1 xfce RAID 0 install - error installing grub after chroot

I have a MacBook 7,1 and I am attempting to configure 2 ssd's in RAID 0, with a fresh install of (64)Mint 18.1 xfce on top. I used this tutorial -> https://forums.linuxmint.com/viewtopic.php?f=46&...
-1
votes
1answer
42 views

When a RAID0 fails, can you still see all the file/folder names?

When a RAID0 fails, can you still see all the file/folder names? I'm considering making a RAID0 NAS but am unsure how failure occurs. It's not the data I am concerned about losing but the reference ...
0
votes
2answers
3k views

How to assess a RAID0 error?

I read the following post and I am having an issue with my laptop (Acer Aspire S7-392). The drive set up was RAID0. I have little experience in RAID setup, but here is the screen I encounter once ...
0
votes
2answers
5k views

Remove Raid-0 and reinstall windows 10

I have recently bought this laptop: Here. Unfortunately, it comes with two 256 GB SSD's in Raid 0. I do not want this, so I will break the raid configuration. HOWEVER, because Windows is installed ...
1
vote
1answer
2k views

Creating a RAID 0 on C drive

The 250Gb SSD I am currently using on my C drive is starting to be full. I am considering buying a second one and make a RAID 0 to expand capacity (performance gain is just a bonus for me). Is it ...
0
votes
1answer
139 views

AMD SP5100 Raid 0 rebuild

I was using an onboard AMD SP5100 raid controller for a Raid 0 on two 1TB drives. The motherboard has failed. I have two questions - firstly if I replace with an identical motherboard, will I be able ...
0
votes
0answers
37 views

How can I safely step away from my RAID 1 setup?

I have about 500 GB of data on two 1TB drives running a mobo hardware RAID 1. I keep running into problems and have decided to back out of all of this and just use the drives like normal HDD's. I want ...
1
vote
2answers
2k views

Bios boot time 15 sec

My setup: MotherBoard: Asus H170 Pro Bios Ver. 1803 Windows 10 Sata information: SATA6G_1: ADATA SP900 (128.0GB) SATA6G_2: ADATA SP900 (128.0GB) SATA6G_3: N/A SATA6G_4: N/A SATA6G_5: N/A WDC ...
0
votes
1answer
150 views

Laptop + 2 SSDs in RAID 0 + strong password - an acceptable alternative to encryption?

Objective: protect the data if a laptop is stolen given that it has 2 drives in RAID 0 and it has only one user account with a very strong password? (try to avoid using BitLocker to save performance ...
0
votes
2answers
2k views

Disk Was Part of RAID, Now Won't Even “Initialize” In Windows

I had a RAID-0 with two 2TB disks. I moved all useful data off of them, but did not break the "RAIDness" on the system it was operating on. Now, I have moved one of them to another machine, but the ...
0
votes
1answer
394 views

Ubuntu 16.04 detect/confirm raid0

How to detect that i have raid0? I have created hardware raid0, but want to confirm in inside Ubuntu, that Ubuntu is using that raid0 instead of software one... How to detect both hardware and ...

1
2 3 4 5