Questions tagged [raspberry-pi]
Ultra low-cost computer the size of a credit card. Also check the Raspberry Pi SE: http://raspberrypi.stackexchange.com/
1,709
questions
1
vote
0
answers
29
views
Raspberry Pi with Bullseye: how to stream from camera to Youtube Live, and simultaneously save the stream to video files locally
I have raspberry pi 3b+ with Arducam camera and Debian Bullseye, and I would like to achieve the following:
get video from libcamera-vid, 800x600, 15 fps
get audio from default audio source
stream ...
-1
votes
0
answers
19
views
Any terminal-based android distro? [closed]
I had an idea. Put a CLI Version of android on my Raspberry Pi. Is there any one ? Like, i'll flash it on a microSD Card and run it.
0
votes
0
answers
25
views
Wireguard server on Raspberry pi no longer 'forwarding' to the rest of the network
Looking for some help with Wireguard server on Raspberry Pi, as it appears to have stopped working as it used to.
My setup is a home network with a static external IP address, and a 192.168.2.0/24 ...
0
votes
0
answers
23
views
Setup Port Forwarding
Please help me setup a port forwarding.
iMac ➜ Raspberry Pi ➜ My PC using Termius
I know my RaspberryPi's public IP, but not my iMac's one.
The Raspberry Pi is in the same house as I'm in, and my iMac ...
0
votes
0
answers
54
views
Please, concretely, how to setup port forwarding to use remotely my iMac over SSH, with Raspberry Pi
I have a Raspberry Pi and want to use remotely my iMac.
I am in another house, and want to use it over SSH. I have Termius too. I want to create a tunnel where the iMac connects to Raspberry Pi and I ...
0
votes
0
answers
38
views
Raspberry pi fails to boot from USB after cloning disk (HomeAssistant)
My SSD I was running HomeAssistant on was getting a bit to small so I got a larger disk.
I cloned my disk via:
sudo dd if=/dev/sdc of=/dev/sde bs=64K conv=noerror,sync status=progress
(where indeed ...
1
vote
2
answers
46
views
Trying to connect two Pi 4s via respective ethernet ports
I have two Raspberry Pi 4s that each have a Wifi connection to the router. I would like to connect them together via ethernet as well (no router between them - direct eth0 to eth0), to be able to ...
0
votes
0
answers
67
views
Wireguard VPN works on my iPhone, but not on my Windows 11 PC
So I've been trying to turn my raspberry to a VPN server using PiVPN, WireGuard and DuckDNS. I've had some success as after configuring Wireguard on my iPhone the connection works. However, the same ...
0
votes
1
answer
62
views
Can one install the full Linux system to Orange Pi or Raspberry Pi?
There were so called official images such as Raspberry OS or Orange OS.
However, is it possible to create a USB flash drive installation image (Ubuntu for desktops or Fedora Workstation), and install ...
0
votes
1
answer
35
views
How set the public IPv6 on my Ubuntu Server 22 on Raspberry Pi?
I'm new to IPv6 stack, still got lot to learn about it.
I got attracted to it when realized I could run my devices NATless and host a small server even with a home router.
When I run ipconfig on ...
0
votes
0
answers
18
views
Unable to install Seafile's server dependencies
I'm trying to compile Seafile for Raspberry Pi and when I run
sudo ./build.sh -DTA -v 9.0.9 -h https://raw.githubusercontent.com/haiwen/seafile-rpi/master/requirements/seahub_requirements_v9.0.9.txt -...
0
votes
0
answers
32
views
How do I use Localxpose to SSH into a Raspberry Pi?
I want to SSH into my Raspberry Pi 4 when I'm away from home. I already have a Localxpose account, so I figured I would use that. I know I have my keys configured properly, since I can successfully ...
1
vote
1
answer
88
views
Raspberry Pi4 with only linux kernel [closed]
I'm making a robotics project where I have really limited power and heating problems. All I want to do is run a single C++ code on it.
I don't want a whole operating system just for that task. So I ...
0
votes
0
answers
9
views
Issue with passing OpenVPN connection from Raspberry Pi device to only one particular device in subnet
I'm trying to figure out, how to pass OpenVPN connection to device from Raspberry Pi
There is openVPN connection set up on Raspberry Pi. Also pi-hole is set up for the whole network via main gateway (...
0
votes
1
answer
135
views
Dropped HDD seems to be working fine with Windows, makes clicking noise when connected to Raspberry Pi 5
I dropped my External HDD (WD My Passport 5TB) while unplugging it from my Windows PCs USB port. Drop height was about 1m/3ft and it fell on the floor immediately after USB was disconnected. I'm ...
0
votes
0
answers
27
views
Trying to have my Raspberry Pi in two seperate networks: One WiFi, one ethernet, but the internet stopped working after ethernet setup
First of all, I am quite new to Raspberry Pi, Linux, and Networking. I started by setting up my RPi 3 to connect to my local WiFi (I always access the RPi via WiFi using RealVNC). The internet worked ...
0
votes
0
answers
33
views
router -> wax204 AP -> raspberri pi ssh session chain is freezing on certain commands
I have a standard sky router, with one port connected to a newly configured netgear wax204 Access Point (configured in access point mode), with some peripherals hanging off the access point (including ...
0
votes
0
answers
17
views
Add foreign address to IP tables to Docker Image
I am new to Docker. I have a sample website running in a Docker Container and I am trying to access it from another computer on the network.
tcp 0 0 localhost:3000 0.0.0.0:* ...
0
votes
1
answer
348
views
raspotify/librespot disconnects immedately when Spotify Connect connects to it
I installed raspotify on my raspberry pi 3 as per this guide hoping that my phone can use Spotify Connect to output to the speakers which are connected to the pi.
curl -sSL https://dtcooper.github.io/...
1
vote
0
answers
174
views
PXE Booting a Raspberry pi 4
I have a PXE and TFTP Server in a VM and want to Boot a Raspberry Pi 4 with it.
I want to serve a RaspberryOS image to the pi4 because I don't want to use a sd-card for it.
How do I need to configure ...
-1
votes
1
answer
67
views
Raspberry pi, Linux, Google Chrome [duplicate]
We provide call and contact center solution for our customer, based on the info from our software principal, the web application is only support Google Chrome Browser, the problem is:
the customer ...
1
vote
1
answer
311
views
What is the difference between "Kali On ARM" and "Kali On ARM (PiTail)"?
The official website for Kali Linux has two versions for Raspberry Pi Zero W w ithout any explanation of the differences:
Kali Raspberry Pi Zero W
Kali Raspberry Pi Zero W (PiTail)
Same goes for the ...
0
votes
0
answers
32
views
How to forward incoming traffic from MacBook to Raspberry Pi?
I have a MacBook and a Raspberry Pi.
I have the MacBook connected to a router.
The Raspberry Pi is connected to LTE w/ a SIM card.
I want all traffic received by the MacBook to be forwarded to the ...
0
votes
1
answer
169
views
Trying to run Pi-hole as a DHCP server in Docker but lighttpd service conflicts on port 80 with OctoPrint
I need help setting up Pi-Hole in Docker running alongside OctoPrint in Docker. I did the initial setup for Pi-Hole in Docker:
Pulled the Pi-Hole container
Ran the following bash script:
#!/bin/bash
...
0
votes
0
answers
113
views
128GB SD card worked on Raspberry Pi, but shows 2MB Size everywhere else
The SD card I was using for my Raspberry Pi shows up as 2MB size both on my Fedora Laptop and on my Windows PC (using the same USB SD card reader, my only one).
So you might think, the card is ...
0
votes
1
answer
77
views
Trying to ssh into my wireless router from my Raspberry PI - debug1: send_pubkey_test: no mutual signature algorithm
I have an Asus router: RT-AC1300G PLUS
In its settings I set a ssh public key that I generated on my Windows PC using ssh-keygen.
I can connect from my PC without a problem.
I can't however connect to ...
0
votes
0
answers
272
views
Wireguard performance on Linux and SBCs Banana Pi/Orange PI zero 3
So I have an issue with WireGuard performance.
EDIT: I tested it in an Ubuntu VM on a Ryzen 9 with the same results.
The plan is to use an SBC as a WG proxy. On both SBCs I get ~40 mbits with my ...
1
vote
0
answers
91
views
IPv6 hotspot on RPi with NetworkManager
I try to create WiFi hotspot on Raspberry OS (Bookworm) with NetworkManager.
The basic tutorial
https://raspberrytips.com/access-point-setup-raspberry-pi/
helped - I've got IPv4 hotspot which shares ...
0
votes
0
answers
47
views
Access network storage from USB-storage-only device
I have an oscilloscope (and microscope) that only provide USB storage of images. Both devices run a custom embedded OS so it is impossible to use a USB wifi dongle with them.
Is there any USB device ...
0
votes
0
answers
115
views
Can't share Wi-Fi connection over Ethernet with both the firewall and overlay filesystem on
I've configured my Raspberry Pi 4B to automatically connect to Wi-Fi and share its Internet connection to the ethernet port using NetworkManager.
This works so long as:
the firewall (UFW) is off OR
...
0
votes
1
answer
89
views
IpSec StrongSwan HA config misses / no connection
I am using strongswan on rasberian 12 to connect to PFsense with /etc/ipsec.conf from an external network to an PfSense:
config setup
conn %default
keyexchange=ikev1
conn peer-ipsec.xxx.de-...
0
votes
0
answers
91
views
IPSEC libreswan interface endpoint does not match left or right
I am using libreswan on raspberry Pi OS 12 to connect to PFsense with /etc/ipsec.conf
from an external network
config setup
conn %default
#keyexchange=ikev1
conn peer-ipsec.xxx.de-tunnel-1
...
1
vote
2
answers
1k
views
Connecting to Raspberry Pi 4 wayvnc server from Ubuntu (ssvncviewer, gvncviewer)?
I got a Raspberry Pi 4 that I did not set up myself; it reports:
pi@raspberry:~ $ cat /etc/issue
Debian GNU/Linux 12 \n \l
pi@raspberry:~ $ lsb_release -a
No LSB modules are available.
Distributor ID:...
0
votes
1
answer
292
views
Trying to allow a device access to the Internet through ufw using a shared ethernet port on Raspberry Pi while on Wi-Fi
I'm attempting to share my Raspberry Pi's ethernet port so I can connect an ethernet device (indirectly) to Wi-Fi while still protecting the device (and Pi) with a firewall (in this case ufw with gufw ...
-1
votes
1
answer
868
views
Windows Server 2022 on Raspberry Pi 4B
I want to make a simple NAS server. I don't, if possible, want to have to buy a server. I have made a NAS on my LAN before with OpenMediaVault on a Pi, but I need the flexibility and tools of Windows. ...
0
votes
0
answers
405
views
Can't SSH on a FRESH install of Ubuntu Server 23.10 on a Raspberry
After days of trial and error, Ubuntu Server 23.10 is FINALLY running on my Pi.
Already ran apt update and apt upgrade. However I can only control my Pi via direct keyboard and monitor. It's not ...
0
votes
0
answers
66
views
Beumons touchscreen not working
First time posting here hope i'll do everything right
Just got a Beumons screen from Amazon (10.1'' Raspberry Pi screen Touchscreen Monitor 1280X800 USB HDMI, etc.). It's a touchscreen but when I ...
0
votes
0
answers
120
views
How to run sh script in lxterminal using double click on Raspbian
I've read so many threads regarding running a script using double click, but none of the ways describes my case.
My operating system is Raspbian Bookworm (Debian), the graphical shell is LXDE and the ...
0
votes
0
answers
57
views
how to fix issue with raspberry pi that can't get out to the internet after recent changes related to wireguard/vpn
I have a raspberry pi (bullseye) that can no longer connect to the internet after recent changes related to trying to get wireguard/vpn working.
Here is the routing table:
route -n
Kernel IP ...
1
vote
1
answer
287
views
I am trying to connect my Raspberry Pi 1 model B+ to the internet via an ethernet cable which runs to my PC, and its just not working
I am running Ubuntu 22.04 and since the past few days I have really been struggling with getting internet connectivity to my Raspberry Pi, it doesn't support wireless networks, so I need to run a LAN ...
2
votes
0
answers
468
views
Stream copy USB webcam on remote Raspberry Pi to FFmpeg on Windows 11 via FFmpeg, mediamtx, ncat, piping, tunneling or any combination thereof?
Question
How do I stream copy raw video and audio from a USB webcam on a remote Raspberry Pi 4B running Raspberry Pi OS to FFmpeg (or a file!) on a machine running Windows 11 via FFmpeg, mediamtx, ...
0
votes
0
answers
163
views
Ubuntu/Debian/Raspberry Pi OS based standalone offline installer to include dependencies
I'm looking at ways to create an installers for a C++ binary (but could be any other software in future) to include dependencies such that the installer can be run standalone and offline by an end ...
1
vote
1
answer
362
views
Peer connection issue with Wireguard
I am requesting your help because I have a Wireguard peer connection issue. I can't figure why. Here is my situation, I have Wireguard server installed on my raspberry pi#1 (home) on docker. I have ...
0
votes
0
answers
123
views
Start browser on chromium os at system startup
I am trying to start the browser and have it load a certain page when the system starts, but I have not yet been able to find a solution.
I am using Chromiun OS on a raspberry PI 4.
Does anyone have ...
0
votes
0
answers
80
views
Trying to run an offbrand raspberry pi via a direct ethernet connection to PC
I'm working with an off brand Raspberry Pi (BTT Manta M8P/CB1) and the environment I'm working in requires it be directly connected to the PC via an ethernet cable. (Wifi or ethernet connection to ...
0
votes
0
answers
23
views
OpenSSH on headless piOS closes connection immediately on connection command
I run OpenMediaVault and Docker/Portainer on a headless rpi4. I've never had SSH issues before, have it on a custom port but never been a problem. I ran -vvvv and see it failed to open id files that I'...
0
votes
1
answer
511
views
Raspberry Pi DHCP server loses its static address
I am using a Raspberry Pi 3B running Pi-OS 10.13 (kernel 5.10.103-v7+).
I am running bind9 to provide DNS services for my LAN and isc-dhcp-server to provide DHCP services for my LAN.
The Pi is ...
0
votes
1
answer
52
views
How do I assign a mac to an ethernet port in DHCPCD
I am running a Raspberry Pi Zero with two usb connected ethernet ports (different models, different MACs). When I cold boot MAC A is assigned to eth0 and MAC B is assigned to eth1. after a reboot MAC ...
0
votes
0
answers
113
views
Aria 2 disconnected in AriaNG
I installed Aria 2 and the ArianN graphic interface https://hub.docker.com/r/p3terx/aria2-pro, but I still have Aria diconnected. Can you help me? Thanks in advance
0
votes
1
answer
3k
views
UsbIP client for Windows without needing to put the whole system in "Test mode"?
I'm trying to connect some devices I've got in another room to my computer so it recognizes them as if they were connected through the USB. The setup I'm using is with a Raspberry Pi 4 (Model B):
...