Questions tagged [snmp]
Simple Network Management Protocol(SNMP) is an Internet-standard protocol for managing devices on IP networks. SNMP generally operates over UDP.
105
questions
19
votes
3
answers
84k
views
Is there an SNMP feature for Windows 10?
In previous Windows versions, I could install the SNMP feature, which allowed network monitoring software to remotely gather basic system information from Windows. I haven't been able to find anything ...
7
votes
2
answers
148k
views
How to get CPU temperature on Windows system using both Snmp and cmd
I am currently working on NMS Zabbix. After some R&D, I am able to get the CPU temperature info on Linux via snmp as well as terminal using LM-SENSORS. However, the same doesn't work for Windows; ...
6
votes
1
answer
44k
views
Where can I find the MIB list for my computer (Ubuntu 12.04)?
I want to play around with snmp traps on my computer, but need the MIB list for that (I guess). So where can I find it on a Ubuntu 12.04 system?
6
votes
3
answers
6k
views
Collect temperature and fan speed with munin from Windows 7 PC?
I'm quite fond of munin and using it also at home to monitor my PCs. What was super-duper easy under Linux is pretty much unsolvable for me under Windows: I'd like to monitor CPU and Motherboard ...
3
votes
2
answers
9k
views
SNMP : with not root user
I normally do snmptraps and other net-snmp commands without problems with root session, but when i try to execute same commads with a normal user i obtain follow errors:
Cannot rename /var/lib/net-...
3
votes
1
answer
9k
views
How to set up snmpd to listen on an alternative port (other than 161)?
I am working on a CentOS 6.4 64-bit, as root. I am trying to set up the system snmpd agent, so that it listens on a port other than 161, e.g. 8001. I successfully got that on Debian 7.x by just ...
3
votes
2
answers
4k
views
What are SNMP indices?
I'm trying to find out what is meant by SNMP indices. I read the following statement on wiki:
Index assignments for an SNMP device
instance may change from poll to poll
mostly as a result of ...
3
votes
1
answer
2k
views
How can I expose my fan speed, cpu temp, etc to WMI and/or SNMP? [duplicate]
Possible Duplicate:
Collect temperature and fan speed with munin from Windows 7 PC?
How can I expose my fan speed, cpu temp, etc to WMI and/or SNMP?
Free solutions are preferred.
On Windows XP/...
2
votes
1
answer
30k
views
Windows 7 SNMP Names and OIDs
I would like to retrieve the list of available SNMP names and/or OIDs for my Windows 7 machine. Is there a command to do this? Is there a common list of SNMP names available for Windows?
Currently ...
2
votes
4
answers
13k
views
Is the "SNMP Service" unavailable in Windows 10?
Adding the SMTP service to a Windows OS seems quite straightforward in almost all cases: open the Windows Features interface, then check the "Simple Network Management Protocol" option. After ...
2
votes
1
answer
8k
views
Getting a “FATAL: Connection to Cacti database failed” when attempting to install Cacti on CentOS
I've nearly finished setting up Cacti on a headless VM CentOS server.
Apache is up, MySQL is up, all requisite PHP modules are installed.
When I browse to the server's IP, I can verify that httpd is ...
2
votes
2
answers
234
views
usage of SNMP protocol
Is SNMP used to show a machine what software it must be running?
I heard that SNMP is used for monitoring, so I am curious whether SNMP is used in this way.
2
votes
2
answers
4k
views
UDP port blocked?
how do I know if the UDP port that i'm sending requests to is blocked?
I am sending a snmp request and the SNMP agent receives requests on UDP port 161.
I want to know if the port is blocked or not?
2
votes
1
answer
920
views
snmptrap V3 with net-snmp not working "usm: no match on engineID"
I am trying to send snmptrap from my centos machine to other centos machine.
I am seeing the below in logs,
snmptrap V3 with net-snmp not working "usm: no match on engineID"
trace: sc_hash(): scapi.c,...
2
votes
1
answer
3k
views
How to change the SNMP community name "public" in (ZT230) Zebra printer?
I have an SNMP issue with the community name.
The default name is "public". When I tried to change it to anther one, I find that I can walk the SNMP with two name "public" and "loreal" (giving the ...
2
votes
1
answer
73
views
Calculating network usage from a server
I am trying to calculate the % network utilization for a server on my network for any snmp traffic, (in or out). I have followed the below steps, can someone point out if I have gone wrong in the ...
2
votes
0
answers
260
views
How to install snmp in ASIANUX Server 7 offline?
I am working with ASIANUX Server7 machine offline and I need to install snmp.
In fact, I downloaded net-snmp-5.7.2-49.el7.x86_64.rpm from other machine and I copied it to the ASIANUX machine and I ...
2
votes
0
answers
266
views
Snmpd blind scan on different subnet
I have snnpd installed on 3 computers on the same subnet and can discover the rest from any computers in that network.
The command I use is: snmpwalk -v 1 public ip
However, when I move one to ...
2
votes
0
answers
214
views
Simulate SNMP Trap with SNAT
I have to test SNMP 2c Traps. I want to send those traps from some computer and the trap destination has iptables. So before the trap enters the NMS, I could just rewrite the real source of the trap ...
2
votes
0
answers
281
views
How can I configure Microsoft SCOM to read SNMP traps?
I have a tool which sends SNMP traps on critical events. Can I configure SCOM to receive those traps?
Is there any mechanism in SCOM which receives SNMP traps from other tools, like the Trap Receiver ...
1
vote
3
answers
1k
views
Relevance and Necessity of SNMP [closed]
Edit: I am in the process of designing a Java-based monitoring tool that will send back periodic "health checks" of a Java app deployed to a cluster of GlassFish servers. I am trying to figure out the ...
1
vote
1
answer
10k
views
A printer's SNMP community name is the default "public", will changing it affect it's use?
I'd like to change it from the default "public" as a part of removing vulnerabilities in the workplace.
Also, can the "read only", "read/write", and "trap" community names use the same strings?
1
vote
1
answer
1k
views
SNMP (net-snmp) is missing 64 bit counters on FreeBSD 9.1 (ifHCInOctets/ifHCOutOctets)
I am using SNMP (from the port net-mgmt/net-snmp, v5.7.2, compiled with "MFD_REWRITES") on a FreeBSD9.1-RELEASE system. For some reason, the ifXTable MIB (1.3.6.1.2.1.31.1.1.1) seems to be missing the ...
1
vote
1
answer
2k
views
What are the steps to take to get specific information from SNMP?
I want to query a FortiGate for its CPU usage.
Per Fortinet documentation, the variable to use is fgPerCpuHighDetails:
$ grep fgPerCpuHighDetails /home/qa/.snmp/mibs/FORTINET-*
/home/qa/.snmp/mibs/...
1
vote
1
answer
972
views
How to enable SNMP on Linksys WAG120N
I'm trying to enable SNMP on my WAG120N.
There is no config for enabling such a feature in device configuration page (http://192.168.1.1)
But when I back up my config and open it in a text editor ...
1
vote
1
answer
519
views
SNMPGET/WALK Timeout on Printer
I have an HP LaserJet CP5225n printer that I am using to test SNMP on our network. I'm new to SNMP so I am having trouble figuring out what's going on here. I'm just trying to return the Device name ...
1
vote
1
answer
5k
views
Periodically storing the results of snmpwalk to a file in Linux
I'm running snmpwalk on Linux and saving the output to a file using
snmpwalk -v 2c -c public 192.168.129.122:17225 1.3.6.1.4.1.2.1.1.1 >> SNMPWALK_SS
If the value of one parameter is saved ...
1
vote
3
answers
12k
views
SNMP work only with localhost
how could I configure it, to work with my hostname, my ip, my domainName
snmpwalk -v 1 -c public localhost .1.3.6.1.2.1
works
snmpwalk -v 1 -c public myPCname or myIP .1.3.6.1.2.1
doesn't work:
...
1
vote
1
answer
3k
views
Collect MAC-Adresses of connected devices via SNMP
i am working on an script, which collects data from Netgear-switches via SNMP.
My problem is, that i am not able to find the OID, which represents the MAC-address of the clients connected to a port.
...
1
vote
1
answer
2k
views
SNMP : Community Name is "public", how I can change it?
I want to change SNMP community Name in Zebra ZM600 printer from public to private for ex:
snmpwalk -v1 -c public "address IP" enterprises.10642.20.10.10.5
when I walk the MIB tree I use public like ...
1
vote
1
answer
275
views
change commuinty name snmp via zpl commande
I want to change the community name snmp for zebra printer via zpl commands the community name snmp is public in default, i tried with ^NN command , but nothing change, this is an example :
^XA
^NN,,...
1
vote
2
answers
150
views
Configure SNMP to send messages to two different monitoring platforms
Is it possible to configure snmpd on Ubuntu (via snmpd.conf) to send messages to two different monitoring applications? For example, lets say I have defined a read only community called 'readonly', ...
1
vote
1
answer
850
views
How do I find out the SNMP OID prefix?
I am trying to get information on the current IN / OUT bound traffic on an Airport Express router displayed in an openHAB setup.
what I need is to be able to supply a line something like these:
in: ...
1
vote
1
answer
22k
views
SNMP: Configuring/Enabling SNMPv3 on Windows 7
How do I enable SNMP v3 and configure SNMP v3 users and groups in Windows 7?
1
vote
1
answer
889
views
How to Monitor servers with SNMP?
I am linux new user, and want to monitor my linux server with SNMP protocol to get some cpu, memory info, how do I use the snmp to monitor linux system? how to monitor linux servers with snmp?
1
vote
2
answers
2k
views
Enable SNMP Remotely
I have a handful of Windows servers that I would like to enable SNMP on. However, they are all remote virtual machines so there is no way to use the installation CD's for the required files that SNMP ...
1
vote
0
answers
93
views
snmpd pass_persist function not working with snmpwalk
I have a program handling pass_persist from snmpd. It works fine for get and getnext requests.
Get on 0.0 returns 0.0, and GetNext on 0.0 returns 0.1:
user@debianbase:~$ sudo snmpget -v 2c -c public ...
1
vote
0
answers
152
views
ifAlias set but not showing from snmp query
I'm in a dead end with this problem.
I set an ifAlias for some interfaces for some testing, the alias seems set properly:
$ ip link show
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc ...
1
vote
0
answers
1k
views
How to change default MIB search path for Windows?
I downloaded and installed Net-SNMP 5.7.0 for Windows from this link:
https://sourceforge.net/projects/net-snmp/files/net-snmp%20binaries/5.7-binaries/
It's running ok, but every time I run SnmpGet....
1
vote
1
answer
267
views
How to implement lwIP+SNMP in LPCxpresso?
I am using lpcxpresso software and done with lpcopen's webserver example . Now I would like to implement SNMP with the existing lwip present in webserver. I have seen the steps to build SNMP agent on ...
1
vote
1
answer
354
views
Creating a service for snmpd.exe on windows server + Cygwin
I need to create a service for the snmp daemon snmpd.exe which is installed on my windows server 2016.
I use sc create snmpd binPath= "C:/path/to/snmpd.exe" and then I try to start it with sc start ...
1
vote
0
answers
201
views
Why a device is not detected on pci network card?
UPDATE 1
The OS on the server is Windows 10 Enterprise
I have a device that is connected directly to a server with an ethernet cable. No other ethernet cables or devices are connected to the server. ...
1
vote
0
answers
44
views
net-snmp what's wrong with the OID?
I have requested for a PEN(Private Enterprise Number) and got it. The PEN is 50743. I have a very simple MIB which looks like this:
SAMPLE-SNMP-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-...
1
vote
0
answers
51
views
Measure download volume from a service provider
I have an internet service provider that uses satellites. I need to measure the actual download volume for specified time periods. My reading on this lead me to believe that SNMP will do this. Thus I ...
1
vote
0
answers
12k
views
tcpdump is overlooking some snmp traffic
I am sniffing for SNMP traffic to code a testcase for some network hardware.
Currently I start tcpdump like this:
tcpdump -i any -nn port snmp
I then send some SNMP traffic from the same host:
...
1
vote
0
answers
129
views
Can I get a cumulative In and Out counter for SNMP of my CentOS Linux servers from Nagios?
My SNMP monitoring server (Nagios) has a handful of plugin files for network interface monitoring, none of which so far have really helped me, or my parameters are not correct. I am monitoring remote ...
1
vote
1
answer
260
views
How to see previously retrieved SNMP values in Nagios
I have successfully configured Nagios 3.2.3 to monitor several SNMP Agents.
For instance, I'm monitoring the OID RFC1213-MIB::udpOutDatagrams.0 on one of those agents.
This is working fine. I can ...
1
vote
0
answers
122
views
How can I know if SNMP Walk or a Table-View is started?
Hello how can I know if a User has "sent" a SNMP-Walk or a TABLE-VIEW request to a device with UCD-SNMP/NET-SNMP and custom coding?
1
vote
0
answers
308
views
Sonicwall SNMP configuration
I'm playing with an old Sonicwall and I'd like to configure it with SNMP. All docs and Googling I've done show the same procedure:
System > Administration > SNMP Enabled ( community string etc. )
...
1
vote
2
answers
2k
views
SNMP not using community string in snmpd.conf
I'm trying to simply set up SNMP on a Red Hat system. I can walk the MIB tree just fine using the following command (from a different server): snmpwalk -v2c -c public HOST IP
However, when I try to ...