Questions tagged [static-ip]
Questions about using a static IP address, as opposed to using a dynamically-assigned one.
306
questions
0
votes
0
answers
8
views
Windows XP: Difficulty setting static IP address on a private computer (No internet required)
I am trying to set static IP addresses for an Intel 82567lm-3 and Intel 82574L on a single Network interface card (dual port).
I am NOT trying to gain access to the internet, it is intentionally ...
0
votes
2
answers
91
views
What is the best practice for assigning static IP addresses? [closed]
In my scenario, I would be assigning IP addresses to security cameras.
I am wondering if I should assign a static IP address from the device itself, or have a static entry on my DHCP server with their ...
0
votes
0
answers
258
views
Ubuntu 20.04 netplan static configuration gets reset after a while
Expected behavior:
My netplan configuration is always used and the static IP addresses I configured stay like configured.
Actual behavior:
Somehow the machine "forgets" the configuration and ...
1
vote
1
answer
38
views
Static IP Assignment on the Local Area Network removes computer from the internet
I have a small PC that I am using as a media server. I set the IP Assignment to Manual, and gave it a static IP address. However, doing this pushed it off the internet, and that Ethernet port now ...
0
votes
1
answer
41
views
How to add a simple authentication page for static pages on a static IP
I have seen this simple authentication for websites for restricting the number of users who can access the pages.
I host some of my pages on my in-house servers and I just need a simple authentication ...
7
votes
1
answer
1k
views
I can't reach my own static IP address in my home. I can reach it outside of my home
I purchased a static IP for a server I run at my home. I can access it outside the home, but I cannot reach my server with my static IP address when connected to the home network.
It just works with a ...
0
votes
0
answers
18
views
Two static IP from different ISP for web-hosting
Router 1:
Static IP: x.x.x.x
LAN IP: 192.168.1.1
Port 80 and 443 forwarded to 192.168.1.100
Router 2:
Static IP: y.y.y.y
LAN IP: 192.168.2.1
Port 80 and 443 forwarded to 192.168.2.100
Web Server
IP ...
0
votes
0
answers
1k
views
Ubuntu server 20.04 no internet connection
I have a host with Ubuntu server 20.04 installed on it.
The server is connected with ethernet cable to a PowerLine repeater.
After installation, there is no internet connection; so, I searched on ...
0
votes
0
answers
88
views
Virtual Box Host only VMs static IP monodirectional working
I started the study of malware analysis following this book: Learning Malware Analysisi.
The lab environment is made by:
One or more Windows VM, to execute malware to analize
A Linux host to use as ...
0
votes
1
answer
626
views
No Internet Access after setting the static IP address on Windows 10
I had set the static IP address from control panel then checked "validate settings upon exit" and hit close then no internet access to the Wi-Fi shown. Meanwhile a windows network diagnostic ...
1
vote
0
answers
208
views
Reach static IP on a different subnet
I want to set a private IP to a Linux server located in my LAN.
I've used the following commands to set the IP to 192.168.10.100:
sudo nmcli con mod "Wired connection 1" ipv4.method manual
...
0
votes
1
answer
80
views
Redirecting static IP traffic to dynamic host
I want to host a service on my home network. My ISP unfortunately charges $30/Mo for static IP. However on my VPS host I can add that for just a $1/month. While my ISP gives me dynamic IP, I do have a ...
1
vote
1
answer
48
views
Windows 10 computer can only connect when using an address assigned via DHCP
The Problem
My computer will only connect to the internet if it has an address assigned via DHCP. Otherwise if I statically set an address, it will be ignored and use the Windows default address of ...
0
votes
1
answer
152
views
Local static IP for device based on MAC address
I have Genexis Platinum-4410 Wifi modem. What am trying to implement is, I have a device(camera) that automatically connects to this LAN through WiFi. I would like to assign a particular local IP (say,...
1
vote
1
answer
45
views
Does Static Ip address assigned to my NUC in one network changes when I change the network?
I bought a NUC on eBay, but I don't have a monitor. So I'm visiting my friend's place to use his TV as a monitor to install Proximox. I'm planning to assign a static IP to access the Proximox console ...
0
votes
0
answers
85
views
Server's local interface IP changes to WAN IP as soon as I ssh in
I've got a Debian 9 server with 2 statically assigned interfaces on the same subnet (my primary interface on 10G and a backup interface on LOM). At system boot, all configs are good & stable. ...
0
votes
1
answer
392
views
Changing WAN to static IP address and Synology NAS
I have a Synology NAS that connects to my AT&T fiber provided modem/router. I have the NAS assigned a static internal IP address like 192.168.1.70. I also have port forwarding rules setup to allow ...
0
votes
1
answer
102
views
can local host name be resolved to static Ip
I am seeking solutions on how to resolve a host name to a static IP. I am not running a DHCP server so that's why I'm statically addressing IP addresses. I can set the static IP address perfect and ...
0
votes
0
answers
386
views
Windows 10 Mobile hotspot with static IP
I'm wondering if there's a way to configure the Windows 10 Mobile Hotspot such that the devices connected are given the same IP address every time. I believe this is done as a Static IP but I don't ...
2
votes
1
answer
64
views
How to configure a Hyper-V server with VMs, PMs and a wifi hotspot
I have to, for the next month, run my home network off a wifi hotspot provided by my phone. I've moved house and previously this was working successfully via my router. I've had it setup using static ...
0
votes
3
answers
295
views
How to run a web server on my PC without static ip
I have two related questions:
1- When I see my global IP address in a website like https://whatismyipaddress.com/, which is for example X.X.X.X, I think this is not only mine, and a lot of people who ...
1
vote
0
answers
48
views
static network connection between two debians
I am having a big trouble in setting a simple static connection between two computers (two Debians, say A and B). I know, in principle, how to do it, and have done properly for computers B and C (all ...
0
votes
1
answer
637
views
failed to ping a guest VM on virtualbox from another Linux machine
to put it simple, here are two machines in my local intranet.
One is Ubuntu based Pop!-OS computer, the other is a Windows 10 DELL desktop. Both computers are wirelessly connected to a local home ...
1
vote
0
answers
23
views
How to directly connect a macbook to a device with a static ip address
I have a device that serves a web interface at http://192.168.0.7 but I cannot access it because my home network uses a different subnet.
I have a macbook with an ethernet adaptor. How can I connect ...
0
votes
1
answer
142
views
Scenario where DHCP static lease AND static IP (both with same IP) on same machine?
OK the obvious answer is that "this is stupid", but please read the scenario.
Let say, we have a very sensitive piece of equipment (like an alarm system), that we want to eliminate as many ...
1
vote
1
answer
113
views
How do you know what port to use for a static IP (as a proxy)?
Does the static IP provider specify it, or is it an arbitrary number you pick from a range?
For instance, where the proxy format would be: https://username:password@static_IP_address:portNumber
0
votes
1
answer
83
views
How to create a new static ip address along with the dynamic one in Ubuntu
The dynamic IP-address causes some problems since it changes frequently . I have to configure my application every time I run it. I have decided to use a static IP-addressing but soon I realized that ...
0
votes
1
answer
144
views
If I do get two static ips, can I get them through the same PPPoe connection (one cable)?
I have a residential connection with one static IP currently.
I am really curious about, if it is possible to get one more Static IP with one cable, which is connected to my router's WAN port. Will it ...
1
vote
1
answer
66
views
Do you need two separate IPs each, for hosting a website, and for hosting a mail server? [IPv4]
Edit - I am only talking about public static IP addresses here.
Do you need two separate IP addresses each, for hosting a website, and for hosting a mail server? Or can I use the same IP address for ...
0
votes
0
answers
107
views
Create a private network between VMWare Linux(guest) and an embedded board
I am running Ubuntu on a VMWare on Windows host. I have a target embedded board(eg. Raspberry Pi) which is running Linux. I have connected the ethernet port of board and my Windows host using an ...
0
votes
2
answers
2k
views
How to find the fixed IP of a device connected directly to the computer?
We have an Automatic Weather Station. I connected my PC using an ethernet cable to it directly. I accessed the AWS using the IP 192.168.1.115 and changed the IP to some other class fixed IP. After ...
1
vote
3
answers
1k
views
How to set up a static IP address for my home server (LAN)
I want to set up a home server, and I need to assign my computer a local static IP address. I do not want a public one, just one for my local network, so it doesn't cost money. How can I do this?
0
votes
1
answer
64
views
WOL works over internet for couple of seconds
I have 2 internet connections (ISP1 and ISP2) to my PC with a WiFi adapter and a wired NIC. I have a network of PCs connected to the NIC. I have a public static IP to the ISP2 router connected to the ...
-1
votes
2
answers
399
views
Port Forwarding and static IP without router access
I am living without access to my router or any webGUI, but I am trying to make a self hosted home server which I would like to open up and expose to the internet. I am would love to give myself a ...
2
votes
0
answers
157
views
netctl: Static IP configuration lost automatically after few seconds of starting the interface
I am using netctl in Arch Linux on Hyper-V. I have two ethernet interfaces eth0 & eth1.
IP config:
eth0: dhcp (automatic configuration, no involvment of netctl)
eth1: static ip (10.10.10.1/8) ...
1
vote
1
answer
61
views
Http Request after passing through firewall and loadbalancer
I have a Firewall, then a LoadBalancer (IIS-ARR load balancer) and 2 IIS webservers.
The 2 IIS web servers will be in LAN with private IPs. My website is hosted on both the webservers.
My actual ...
2
votes
1
answer
415
views
Why subnet prefix is required when setting up a static address with nmcli in Linux?
It's conceptual question. I understand why subnet masking is required to achieve correct addressing of packets on the net. However, I do not understand why NetworkManager needs to know the schema (/24)...
0
votes
2
answers
601
views
Set multiple static IP addresses if DHCP fails
On Windows10, I would like to be able to set multiple static IP addresses (eg. 192.168.0.250, 192.168.10.250, 10.0.7.250) on the computer ethernet interface card if no DHCP server is found.
I know ...
0
votes
2
answers
839
views
How can I connect to my NAS that has a static IP that uses the wrong gateway address?
I have a nas that for reasons I set up to use a static IP. One ISP switch later and now I can't access my NAS, because it uses the wrong default gateway address. I can therefore also not access the ...
2
votes
2
answers
4k
views
No network after changing static IP address on Alpine Linux on Raspberry Pi
I'm running Alpine Linux on Raspberry Pi. I'm trying to set a static IP address. So I changed the contents of /etc/network/interfaces file from
auto lo
iface lo inet loopback
auto eth0
iface eth0 ...
0
votes
0
answers
134
views
My company website is not accessible via Static IP address
I am using static IP for internet connection.My company webpage is not accessible when I connected by WIFI.But, when my mac address cleared from server by the internet provider and When I configured ...
1
vote
4
answers
703
views
Can I assign myself any external IP address that I want? [duplicate]
I have a static external IP address that I got from my ISP. They told me I needed to enter it into my router settings which I did and it worked. But I don't understand how it works exactly.
Does it ...
2
votes
1
answer
803
views
Linux device won't connect to internet, but allows SSH
I'm having trouble connecting to the internet with my Wachendorff Display. I can connect to it via SSH, but I cannot get it to also connect to the internet.
I am able to ping other devices plugged ...
0
votes
0
answers
23
views
CISCO WAN without Dedicated/Static IP
I have some CISCO devices (firewalls & switches)
I intend to set up a WAN between two locations but both locations are dynamic IP (residential broadband).
The IP's of each location do not change ...
0
votes
1
answer
281
views
Unable to connect machines on a local network
I have 3 systems -
Windows 10 system with firewall disabled
CentOs 8 system with firewall disabled (firewall status is inactive)
Windows 10 VM on the CentOs 8 machine described above with firewall ...
1
vote
2
answers
238
views
Static ip on different subnet cannot reach unpopular websites
I have a printer, raspberry pi, and a regular router
// printer
static ip: 10.0.0.100
subnetmask: 255.255.255.0
default gateway: 192.168.1.1
// raspberry pi /etc/dhcpcd.conf
static ip_address: 10.0....
0
votes
2
answers
704
views
ISP for audio streaming: Dynamic IP vs. Static IP
I'm an audio streaming enthusiast and would like to know the differences between an ISP that provides a Dynamic IP with another one that has a static and private IP.
What's the recommendation for ...
1
vote
0
answers
43
views
Make my LAN independent for local routing (DHCP + static routing) while connected to a cable modem with DHCP which cannot be disabled (ISP)
First of all, I want to say that my knowledge about networking is basic (I'm a web developer, not a net admin :D)
I have a local network composed by:
A cable modem with routing capabilities (Let's ...
1
vote
0
answers
526
views
Can't ping DC IP and connecting to domain results in an error (
I've set my Windows 10 DC to a static IP, and it is as follows:
IP: 192.168.2.2
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.2.1
Preferred DNS Server: 192.168.2.2
Alternate DNS Server: None
...
0
votes
1
answer
1k
views
eth0 static ip resetting to dhcp upon VM reboot
I am facing an eth ip setting issue where upon reboot the static ip is bieng removed and dhcp is bieng applied .
Env : RHEL 7.6
**ETH configuration before reboot** :
[root@bdnlsit-eda2 ~]# cat /...