Questions tagged [static-routes]
The static-routes tag has no usage guidance.
79
questions
0
votes
1
answer
28
views
No internet on subnet after static routing setup
I am trying to setup this network
[Dev PC] Internet
| ^
| |
| |
| |...
- 1
1
vote
0
answers
62
views
[Mininet/Miniedit]: The hosts cant ping/reach other in a 2 router system
As a part of an experiment, my network has the following topology for two host machines connected to a router in mininet(on Ubuntu 22.04.02 Virtual Machine)
h1 - r1 - r2 - h2
The host ...
0
votes
1
answer
78
views
Static routing between Huawei and TP-LINK not working
I have a fiber internet hooked up to a Huawei EG8145V5 @ 192.168.100.1, DHCP turned on. I am sharing this connection with a second office that I added an ordinary TP-Link router connected via cable to ...
- 126
-1
votes
1
answer
245
views
Static Route-Router Only Accepts 192.168.0.1 For Default Gateway
I recently got a new printer, and it has Wi-Fi only, no ethernet. So, I want to set up a static route, so I do not have to deal with it changing IP addresses after each DHCP renewal potentially. I ...
- 3
0
votes
0
answers
192
views
How to allow static route through nftables firewall/nat
I have the following two interfaces on a nftables gateway.
eth0 (192.168.0.1) connected to 192.168.0.0/24 network
eth1 (172.16.0.1) connected to 172.16.0.0/24 network
I created the following setup
...
- 1
0
votes
0
answers
361
views
Static route + pptp VPN for communication between different networks through internet
I'm trying to configure two routers that are responsible for two different networks. I have a 4G tplink router TL MR6400 in one side, and a 4G Teltonika router RUTXR1 on the other side. I want the ...
0
votes
1
answer
126
views
Static routing inquiry, no comunication between LANs
I am trying to setup a static route within 3 routers. I have a CISCO WRT320N, a TENDA AC2100 and a WiFi 5 Dual Band router. I'm trying to keep the largest number of devices connected via Ethernet. I ...
0
votes
0
answers
20
views
Add routes (IPs ?) to Windows Updates Servers (DNSs)
It is possible to add routes to Windows Udpate Servers?
I've this server which Default Gateway is an internal service interface, so all internet traffic is explicitly allowed via routes in the ...
- 1
0
votes
0
answers
36
views
Trying to host a game server on my raspberry pi - Security concerns & Static Routing
I am attempting to host a game server (Kerbal Space Program - Lunar Multiplayer Mod)
I know from past experience I need to open a port but
On my router all I have is:
"Static Routing"
And to ...
- 1
0
votes
0
answers
169
views
Access Portal of upstream routers
Following is the schematic of my office network:
I am accessing all the routers from my PC (IP: 10.198.158.148 as shown in the figure). IP: 10.198.158.100 takes me to edgerouters portal. Edgerouter ...
- 101
1
vote
1
answer
528
views
Setup static route from main router to sub router
I have two routers say Router1 and Router2. My Router1(DHCP:192.168.0.1) is connected to my ISP and has a few devices connected to it. Router2(DHCP:192.168.1.1) is connected to the ethernet port on ...
- 111
1
vote
0
answers
53
views
static network connection between two debians
I am having a big trouble in setting a simple static connection between two computers (two Debians, say A and B). I know, in principle, how to do it, and have done properly for computers B and C (all ...
- 11
1
vote
1
answer
197
views
how make this two 'separated' lans/networks see each other/works as one?
I need that devices from network 1 see/interact with devices on network 2, but i don't know how to do it.
1 - the modem of the contracted company is currently in bridge mode, because i don't have ...
- 11
0
votes
1
answer
993
views
Communicating and chrome-casting between different subnets
I have my networks set up as all wired connections (PCs, TVs, Chromecasts etc) are connected to our main router (just the standard one that our ISP gave us) with gateway 192.168.0.1 and subnet mask ...
0
votes
1
answer
401
views
How do i set a static route to bypass VPN for a website using my ipv6 address?
So i use a tracker which doesnt allow browsing of its site using a vpn. It is advised to add a persistent route to circumvent and allow browsing while connected to a vpn which I have done using
...
- 1,005
1
vote
0
answers
1k
views
Port forwarding to a static route
I have a TP-Link router cum ADSL modem. The modem connects to BSNL broadband via telephone socket. And the ethernet port is connected to a LAN switch. The ip address of TP-Link device is 192.168.1.1. ...
- 11
0
votes
0
answers
91
views
How to prevent windows from automatically using next best static route
I have two VPNs: VPN1 automatically connects pre-login and acts like a consumer VPN by pushing all traffic through it. Users have no control over this - it needs to connect prelogin which means it ...
- 101
1
vote
2
answers
232
views
Static route and dynamic public ip address
I was searching for this particular question for a long time. Advanced networking is not my expertise.
My company has two branches in two different countries.
Office 1:
Fortigate 200E and static ...
- 13
2
votes
1
answer
2k
views
How do I connect to a computer behind a switch behind a router from the same network?
Environment: I have a router (ASUS ROG GT-AC5300 x 1) in the middle of two switches (TP-Link TL-SG108E 4.0 x 2). The router's WAN port is connected to another router that provides Internet (out of ...
0
votes
0
answers
1k
views
Add static route to Windows 10
My IP from my router is: 192.168.15.26
I connect to a VPN using Cisco VPN which assigns a new interface with the IP: 192.168.10.231
Now, through the VPN, I need to access an MSSQL database to 192....
- 101
2
votes
2
answers
1k
views
How does the IP address of a gateway in a static route affect routing
I have been using a Windows 7 computer to connect to a Windows 10 computer which is on the same physical network but on a different subnet. Before I added a static route to Windows 7 all traffic was ...
- 383
1
vote
1
answer
1k
views
Two NIC with two subnets - access both from each other?
I have a NAS with two NIC's.
I have my normal home network with an Apple Airport on subnet 10.0.1.x. My NAS (a QNAP) is on NIC#1 @ 10.0.1.50 with its own switch. All is good there.
I have NIC#2 set ...
- 121
0
votes
0
answers
86
views
Routing Network through OpenVPN: Network Lost
I am trying to route my traffic through OpenVPN server so that all traffic can go through the server and I access the internet through it. Here is my route table, looks like I lost my access to the ...
- 171
0
votes
1
answer
3k
views
Openvpn Site-to-site with 2 raspberry pi
I would like to do a site-to-site with 2 raspberry pi.
1 rpi as openvpn server on Lan 1
1 rpi as openvpn client on Lan 2
Lan 1 - 192.168.1.0/24
Gateway - 192.168.1.1
Rpi ovpn server - 192.168.1.3
...
- 3
1
vote
1
answer
1k
views
Static Routes on Mesh Routers
I currently have a Netgear WNDR-3700 running DD-WRT and while it's been pretty solid over the years, it only does 802.11n and doesn't reach the farthest corners of our house very well, so I'm looking ...
- 13
1
vote
1
answer
15k
views
Accessing 192.168.1.x device from 192.168.0.x device
I have one device with an IP address of 192.168.1.110 while the rest of the network is 192.168.0.x. The router is 192.168.0.1. 192.168.1.110 is cabled to this router. Other devices connect via WiFi to ...
- 11
0
votes
2
answers
2k
views
How to create a static route to access PC2( Attached Diagram) from PC 1
I'm trying to access a PC on the 2nd router connected to the same Modem. Routers in use are both ASUS, so the UI is the same.
- 9
1
vote
0
answers
1k
views
Android-x86 VM does not respond to ping
I have two VMs in VirtualBox, one Ubuntu 16.04 and one Android-x86 32-bit. I have set both of them to be on the same internal network.
In the Android VM, I ran the following (using Alt-F1):
android:~...
- 111
1
vote
1
answer
299
views
Why can I talk to machines in the local subnet without an entry in the route table for the local subnet?
Running Ubuntu Linux 16.04, connected by Ethernet as 192.168.11.22 with subnet mask /24. The router is at 192.168.11.1.
I was expecting the route table to look like this:
Kernel IP routing table
...
- 113
0
votes
1
answer
46
views
specify route to IP on unix machine
I have two routers. Machines on the parent router (10.x.x.x) can't ping machines on the child router (192.168.x.x) . The parent router doesn't allow static routing. Can I do something on the ...
- 260
0
votes
1
answer
907
views
route add just prints help instead of adding the route
I want to route a website to specific NIC. The interface number of the NIC is 38: Atheros AR7015
>route print
===========================================================================
Interface ...
- 133
1
vote
2
answers
6k
views
Cascading routers: accessing secondary router's clients from first router?
I have a setup using two routers, say Router A and Router B, that looks something like this:
Quite simply, I am cascading Router A and Router B, Router B's WAN port being connected to Router A's LAN ...
- 2,158
3
votes
2
answers
26k
views
Routing table persistent route not working (Windows)
Hi I configured the following persistent routes on my Windows Server.
route -p ADD 10.32.1.40 MASK 255.255.255.255 172.16.8.254
route -p ADD 10.192.1.40 MASK 255.255.255.255 172.16.8.254
They work ...
- 131
1
vote
0
answers
2k
views
Linux static recursive routes not supported?
I'm trying to add some recursive routes. The following idea works fine on say a cisco router, but linux (Ubuntu 14.04.5 LTS) is not happy
# ip -4 route add 1.1.1.1/32 dev eth4
# ip -4 route add 2.2.2....
- 276
0
votes
0
answers
211
views
MAC OSX Routes Table
If I add a route such as route -n add 10.10.10.10 10.255.255.255 i can reach the server under 10.10.10.10, BUT if i add a route route -n add 10.0.0.0/24 10.255.255.255 and remove the other, i can't ...
- 137
3
votes
1
answer
553
views
Why am I having connection difficulties across two subnets?
I'm attempting to wirelessly connect my neighbor's home network with mine. We each have our own internet services and subnets which we want to preserve, but still be able to access services between ...
- 31
0
votes
1
answer
4k
views
Can't make static route and NAT work together
My home LAN is a rather standard 192.168.2.0/24 network with gateway on 192.168.2.1 and has DHCP on addresses from 100+ configured on an ASUS router (RT-AC66U). The WAN is configured via DHCP from ISP....
0
votes
1
answer
2k
views
Static routes and multiple routers
I have the following set up:
My office is located out of town and unfortunately I can't get fibre.
Fortunately, I have a mate in town who can get fibre. He has pointed a p2p WIFI modem at my place. ...
- 131
0
votes
1
answer
818
views
Can not add static route in my Ubuntu, SIOCADDRT: Network is unreachable
I'm trying to add a static route in my VPS to a client that is on the other side of the VPN tunnel to my VPS and forwards it's traffic through the tunnel.
This is the setup of my destination that I'm ...
- 1
0
votes
1
answer
4k
views
how to configure windows to not use default route if static route exists
i have server with ip 192.168.0.1 .my gateway is 192.168.0.243 .after adding gateway it adds default route in routing table .
i have remote site 192.168.2.0 when i restricting this remote site to ...
0
votes
1
answer
188
views
Use two network adapters (one for internet and one for lan traffic) on Windows 7
I have two network adarpters:
Adapter1 : Realtek PCIe GBE Family Controller ip:10.0.3.27
Adapter2 : Dell Wireless 1397 WLAN Mini-Card ip: 192.168.2.39
Both newtwork adapter has internet access. ...
- 136
2
votes
0
answers
213
views
I have a router running DD-WRT, plus a modem/router running OpenWAG. How can I automatically send a request every time my external IP address changes?
I have a Linksys WRT54GL with DD-WRT installed, and Linksys WAG200G with OpenWAG.
I want to send a wget request to a specific server that will automatically update my ip in their records, every-time ...
- 21
2
votes
1
answer
2k
views
What do the entries in my routing table actually mean?
I have a VPN connection (implemented via Open VPN) but am trying to route traffic to certain IPs / domains around it, so they just use my naked internet connection. From my research it looks like the ...
- 123
0
votes
2
answers
941
views
Unpingable IP's on local network
I am using a MikroTik Router. I have two networks: 192.168.1.0/24 and 192.168.3.0/24. One is on ether4 and the other on ether5. I am trying to set it up such that these networks can ping each other.
...
- 223
7
votes
1
answer
11k
views
How would I add network routing instructions with NetworkManager in Arch Linux?
I need some help with networking. I know how to do this in Windows, but not in NetworkManager on Arch Linux.
First my setup:
NetworkManager
Arch Linux
IP Addresses:
+---------------+---------------...
user452025
1
vote
0
answers
100
views
Setup static route to stay using the default gateway if there are 2 NIC & gateways in Windows 10 w/o fallback?
Is there a way to setup static route on Windows 10 to restrict the PC to always use the gateway with the lowest metric as the default gateway, without falling back to the second gateway with a higher ...
- 247
0
votes
0
answers
97
views
2 networks - 2 gateways - 2 dhcp-servers SHARE 1 print-server + 1 file-server
I have two networks:
A: 192.168.0.0/24
B: 192.168.1.0/24
Each network has it's own gateway out to the internet and each of them as it's own DHCP-server running.
Network B want's to share it's print-...
- 113
2
votes
0
answers
1k
views
How do I join two networks without the ability to change the default gateway?
I have a handful of internet-facing Linux (Ubuntu) VPSs with a couple of providers, and I connect them together with a virtual backplane network from ZeroTier (https://www.zerotier.com/). I use this ...
1
vote
1
answer
3k
views
How to communicate (route traffic?) across two different subnets
A home networking question. I would like hosts on different networks (subnets?) that use the same internet connection to communicate. Two routers, 192.168.2.x connects to the the internet and 192.168....
2
votes
0
answers
1k
views
How to create route for dummy interface
I have two linux servers 172.20.140.10 and 172.20.140.11 in same network. 172.20.140.10 is used for simulating the devices and 172.20.140.11 is my Collector.
In 172.20.140.10 I have created 2000 ...
- 121