Questions tagged [transcode]
The transcode tag has no usage guidance.
93
questions
1
vote
0
answers
28
views
How to use VP9 transcoder when streaming video in VLC Player?
I was trying to stream video with VLC using the very low latency VP9 encoder.
Both my OS codec library and VLC player (3.0.16) has been upgraded to the latest version
When I select VLC Player > ...
2
votes
0
answers
324
views
ffmpeg cli settings for the most accurate seeking in the output video
I have a problem with video encoding for HLS stream.
I've found that most video players not support frame accurate seeking or pausing at specific frame and they can't really give us the accurate ...
1
vote
0
answers
308
views
av_interleaved_write_frame(): Cannot allocate memory, Error writing trailer of udp
I'm transcoding from udp input to mpegts udp output. After several hours ffmpeg used all ram memory. I don't know where the problem is.
Command:
ffmpeg -hwaccel vaapi -hwaccel_output_format vaapi -i &...
1
vote
0
answers
171
views
FFMPEG: Sony IPCM 24bit four channel Audio and Final Cut Pro x from Sony A7S III or FX3
I just got a new camera that uses IPCM Files for four channel audio 24 bit tracks in the video. Is there a way to BATCH-rewrap those files so that they are readable in Final cut for example.
There has ...
1
vote
0
answers
385
views
Ffmpeg: Is it possible to use -itsoffset option without transcoding for live RTMP streams?
I am using -itsoffset option for delaying the video track of a live RTMP stream by few seconds but the problem is that I must use -c:v libx264 or other codecs, I cannot use -c:v copy, I want to use ...
0
votes
0
answers
836
views
What is the suitable H/W compatibility for av-1 encoding
Some videos are transcoded, h264 on ARM machine, h265 on Intel Skylake and av-1 on Intel RocketLake. File savings are better with av1 at the same quality but still at a high computational cost.
Avg ...
0
votes
1
answer
330
views
FFmpeg transcode piped mp4 with MOOV at end - but I can read it twice
I need to transcoding an MP4 file using that I can only access via a stream. The MOOV atom is at the end of the file. I do not have the ability to seek to a specific part of the file, only read a pipe ...
4
votes
2
answers
7k
views
Parallel transcoding with FFmpeg on M1 Mac
I'm trying to determine how effective an M1 Mac would be for transcoding video using FFmpeg (specifically resizing and adjusting bitrate). I can do single transcodes using a command like this:
ffmpeg -...
1
vote
1
answer
194
views
how to convert a given video file to all possible codec/container format combinations
I posted the same question in Video Production StackExchange site 8 days and there is not even a single answer to that up till now. So now I decided to try my luck here in Superuser site.
My semi-...
0
votes
0
answers
34
views
FFMPEG - audio crackling when merging wav files [duplicate]
i'm merging two audio files into 1 with a acrossfade filter.
Here is my acrossfade filter config: acrossfade=d=10:o=1:curve1=cbr:curve2=cbr;
The merge is working well for .mp3 files, but when one(or ...
0
votes
0
answers
234
views
FFMPEG - Merging .wav files with acrossfade and getting audio crackling
i'm merging two audio files into 1 with a acrossfade filter.
Here is my acrossfade filter config: acrossfade=d=10:o=1:curve1=cbr:curve2=cbr;
The merge is working well, but for some files it results in ...
0
votes
1
answer
36
views
Issue transcode MPEG2 to DNxHD120
I use the software Kdenlive in Archlinux OS to transcode a 1 hour of video (1:12 :10) in Mpeg2 format in 1440x1080px 50i to DNxHD120 1920x1080 25p. Kdenlive print those parameters in the transcode's ...
0
votes
0
answers
304
views
ffmpeg libx264 is noisy
After converting video with ffmpeg to H264, my video is noisy.
ffmpeg -i http://192.168.1.10:5530/bysid/106 -map 0:v:0 -map 0:a:0 -c:v libx264 -c:a mp2 out.mkv
Normal:
Noisy subtitle:
Same result ...
-1
votes
2
answers
562
views
When transcoding DVD contents, should I keep the 29.97 framerate?
I'm using handbrake to transcode (the main stream of) a DVD into a x265+AAC file, using the handbrake application.
The source material has a frame rate of 29.97 fps.
My question: When transcoding, ...
1
vote
0
answers
2k
views
FFMPEG - Transcoding webm to mp4 - wrong duration
I have a webm file that I want to convert to a mp4 file.
The result is a mp4 file with a different duration than the webm (much longer).
Webm file (via WeTransfer, example.webm, 421kb)
About the ...
1
vote
1
answer
986
views
Thumbnail disappears when transcoding AVI to MP4 with ffmpeg
When I try to convert an very old avi to a mp4 with ffmpeg, the thumbnail disappears.
Is there a way to preserve the thumbnail or auto-generate one directly from the video stream, for example, using ...
0
votes
1
answer
761
views
How to have Windows 7 store its desktop wallpaper file TranscodedWallpaper.jpg on a RAM disk (RAM drive)?
Windows 7 (and later versions, to my knowledge) stores the current desktop's wallpaper as a transcoded image file named TranscodedWallpaper.jpg.
In Windows 7, the location of this file isX:\Users\<...
5
votes
2
answers
12k
views
Is FDK-AAC still better than FFmpeg's native AAC encoder?
I wrote this about a year ago while trying to compile FFmpeg for Cygwin/Windows, based on the claims made in the FFmpeg wiki:
The Fraunhofer FDK AAC codec library. This is currently the highest-...
-1
votes
1
answer
798
views
Is there way to increase speed of adding subtitles to a WEBM video?
With MP4 I used this command
ffmpeg -i INPUT.mp4 -vf ass=SUBS.ass -c:v libx264 -preset ultrafast -crf 22 -c:a copy OUTPUT.mp4
which has helped to increase the speed.
But there are some problems with ...
1
vote
1
answer
1k
views
Automatically convert files to h265 in a certain folder
What I am currently doing
Everything is running on freenas (linux). I always have to go into the shell and start a script to transcode everything inside the folder.
To be exact: I go to the shell and ...
2
votes
2
answers
5k
views
Can I transcode a file with FFmpeg and read the output file on-the-fly?
I have a .M3U8 stream and I can download it and convert it with FFmpeg:
ffmpeg -protocol_whitelist file,http,https,tcp,tls -i "org_file.m3u8" -c copy -bsf:a aac_adtstoasc output.mp4
However I can't ...
0
votes
1
answer
353
views
what is the limitation on max cuda instances for video transcoding?
I have set up Nvidia V100 card on Azure Nc6s_v3 virtual machine. I have set up the latest CUDA driver and SDK. I compiled sample programs from "Video_Codec_SDK_9.0.20" and verified the max parallel ...
2
votes
1
answer
5k
views
Why do audio files converted from OPUS to M4A have a much higher bitrate?
When doing:
youtube-dl -xf bestaudio/best <link to playlist>
...I get a lot of OPUS files at relatively "normal" bitrates like 130kbps.
However, when I run the same command with the ...
3
votes
2
answers
1k
views
Is it safe to omit the codec when converting with ffmpeg?
I noticed today that I could encode or transcode video and audio streams using ffmpeg without specifying a codec, due to the fact that it seems to imply the video or audio codec being encoded or ...
2
votes
0
answers
800
views
How to handle stream with ffmpeg and GPU
So in my project, I need to capture a video stream, decode the video, run the individual frames through an object detection algorithm and then play the output as a video.
This whole operation is ...
1
vote
0
answers
263
views
Unable To Transcode 8 Sources In One Instance Real Time (FFmpeg)
Just the other day I posted about my inability to transcode a multitrack video real time, -rc-lookahead ended up being the solution. However this was when recording fairly static signals, when each ...
2
votes
1
answer
140
views
Multitrack Video Does Not Transcode Real Time
Recently this Github page, dedicated to bypassing Nvidia's encode limit, added windows support:
https://github.com/keylase/nvidia-patch/tree/master/win
Up until now I've been encoding my 5 live ...
0
votes
1
answer
382
views
ffmpeg transcode twice compress further?
I have a collection of avi videos (say A).
I first convert them into MPEG4 Part2 (say B) using ffmpeg -i ${inname} -vf scale=340:256,setsar=1:1 -q:v 1 -c:v mpeg4 -g 12 -f rawvideo ${outname}. The ...
1
vote
1
answer
607
views
FFmpeg 4 versus version 2.2 very slow transcodes in VMWare CentOS 6 container
Whist using "ffmpeg version n4.0.1" I've noticed that on CentOS6 host within a VMware container the video transcoding takes almost twice as long as "ffmpeg version 2.2.1".
Benchmarks below, ran 3 ...
2
votes
0
answers
1k
views
Getting Intel Quicksync working in Ubuntu 16.04 in headless mode for HW transcoding
/dev/dri and /usr/lib/dri doesn't exist.
vainfo returns:
error: can't connect to X server!
error: failed to initialize display
Aborted
lspci | grep VGA returns:
00:02.0 VGA compatible controller: ...
2
votes
1
answer
306
views
Reject DTS-HD MA
I have couple of video files containing both regular DTS as well as DTS-HD MA audio tracks. I want to get rid of the DTS-HD MA audio streams during transcoding, but have not figured out how to do so.
...
1
vote
1
answer
54
views
bash script variables not proper
I updated it a little bit, but I'm still not getting the results I should be getting:
#!/bin/bash
find "$1" -type f | while read filename
do
videoCodec=$(ffprobe -v error -select_streams v:0 -...
0
votes
1
answer
393
views
Ffmpeg transcoding video .vob (vcodec MPEG-2)
I want to transcode a file .vob to get the bitrate 1500 with 16/9 ratio I execute this command ffmpeg
ffmpeg -i /path/video.vob -vcodec libx264 -vf scale=1280:-2 -strict experimental -b:v 1308k -b:a ...
4
votes
1
answer
8k
views
Why is Plex Server transcoding file that can be direct played?
I've installed Plex Media Server in my Raspberry Pi 3. It works perfect but it doesn't have enough CPU power to transcode (when it tries the video freezes every two or three seconds). One of my Plex ...
1
vote
2
answers
3k
views
Intel i5 Kaby Lake Hardware-Assited transcoding of video and audio to VP9 and FLAC using ffmpeg
I have about 30 gigabytes of video (mostly MP4, some MKV and webm) I need to transcode to 8-bit VP9 with Free Lossless Audio Codec (FLAC) audio in an MKV container from various input codecs (AAC audio;...
0
votes
1
answer
1k
views
Maximising efficiency of my M4A music playlist
Reading this answer here and questions like:
What lossy audio formats are more (or less) "efficient"?
Are there any perceptible differences between the sound quality of 192 versus 320 kbps ...
1
vote
0
answers
1k
views
openload.cc How can I extract encoding settings of videos?
My customer needs streaming service for his IP cameras and he ask me about same output quality as videos in openload.cc but I can´t simulate similar quality.I tried several encoding combination but ...
0
votes
1
answer
780
views
Any alternatives to VLC transcode for online stream?
I have 2 favorites public radio stations that I always wanted to listen on the phone but due to high quality 192kbps I was not always to listen because it needed good connection. Now using windows VLC ...
1
vote
0
answers
421
views
Stuttering in VLC-Transcode
I'm trying to transcode a working internet stream to something my Dreambox could play.
My current status is that I can play it on my desktop and on Dreambox, however, there is some constant ...
2
votes
1
answer
5k
views
Transcode Multiple Video Files at a Time in VLC
I am using VLC to transcode video files, in the convert/save menu it lets you select multiple files, but when you click Convert, it just converts the first file in the list. Ideally I would be able to ...
1
vote
1
answer
2k
views
Bulk transcoding ISO/IMG to MP4/MKV
I need a tool/script to help me convert my collection of DVD's to MP4. I've started using Plex instead of playing each image-file directly and it's quite a pain in the butt to manually convert a ...
0
votes
0
answers
2k
views
FFMPEG stop working with no error
I am using FFMPEG to create a video using pictures as input. I never had a problem with it, but now for some jobs I can't get correct outputs, some of them are broken.
Using FFPROBE to check the ...
0
votes
0
answers
547
views
handbreak does not extract subtitles
i have a personal DVD i am trying to backup to a medium that will not go the way of the 5" floppy...
when i "rip" it via handbreak, i select subtitles, then i click "add all" and the subtitle does ...
1
vote
1
answer
498
views
How do I transcode/compress mp4 source files on the Linux command line?
I have some rather large mp4s produced by my phone. They aren't very long, so they're probably not very compressed. What's an example of using a command line Linux tool to transcode one of these to ...
0
votes
1
answer
239
views
How to batch convert to mp4 with arista-transcoder?
I dont understand how to list valid preset names and select the Computer - H.264 preset available in the arista-gtk listing.
When I batch convert like arista-transcode -p "Computer - H.264" *.wmv the ...
3
votes
2
answers
3k
views
ffmpeg equivalent for -movflags faststart for audio
I have several video and audio files on my server that I wish to stream. I have converted all video files to mp4 and audio files to aac.
Now I am streaming both type of files but it seems audio ...
1
vote
0
answers
232
views
Downsampling and streaming video over a LAN (WiFi)
I have a Linux file server at home, and I'd like to watch video stored on it on my desktop.
A very simple solution comes very close: use any old HTTP server to serve up the files, and view them in ...
1
vote
1
answer
2k
views
Transcode RTMP Live stream to multiple clients
I regularly follow livestreams on the website picarto.tv. The website uses RTMP for streaming, and therefore requires flash to show the video source. Many (mobile/embedded) devices don't have flash ...
1
vote
2
answers
4k
views
Cut an FFmpeg video based on frames not a timecode
I want to cut a video with FFmpeg using something similar to the code below:
ffmpeg -i movie.mp4 -ss 00:00:03 -t 00:00:08 -async 1 cut.mp4
However I want to specify -ss and -t in frames instead of ...
3
votes
0
answers
221
views
Can a processor gpu still be used for video transcoding if the motherboard is disabled from using processor gpu?
I am planning to get the following motherboard and cpu.
Asrock Rack e3c224d4i-14s Intel Xeon e3-1276v3
However, after reading the spec sheet on Asrock Rack/Intel Ark, the above mentioned motherboard ...