Questions tagged [wpa2]
The wpa2 tag has no usage guidance.
57
questions
0
votes
1
answer
57
views
Create Hotspot Without WPA or Password
Setting up a network for my area to provide free WIFI, but there doesn't seem to be a way to create a hotspot without WPA2 even using the netsh commands with empty password like I see repeated 1000 ...
- 1
0
votes
1
answer
5k
views
How to know the domain for a WiFi 802.1x / WPA3-enterprise certificate?
I'm on a location that has a 802.1x / WPA3-Enterprise WiFi connection using PEAP / MSCHAPv2 authentication. I only know the identity (username) and password.
I can connect with all my devices: my ...
- 23
0
votes
1
answer
428
views
How to getback to wpa2 psk from wpa2 enterprise?
I have just changed the wifi setting from wpa2 psk AES/TKIP to wpa2 enterprise only AES. Because of that, now I'm disconnected from wifi and it requires username and password to connect which I don't ...
1
vote
1
answer
1k
views
Enabling WPA3 on a client
I have a WPA3 enabled router (in WPA2/WPA3 personal mode).
My NIC supports WPA3 but I cant seem to enable or force it to use it.
I have checked google for quite a while, perhaps my terminology is ...
- 35
1
vote
1
answer
1k
views
Interpret output for `iw list`
How should I interpret the output below? I want to use the device to simultaneously connect to a WiFi network (a wireless router) and to broadcast a separate local network from the device. Is this ...
0
votes
0
answers
242
views
Android 10 hotspot WPA2 enable AES or PSK
Well, everything was working fine until now that when I enabled my Hotspot on Windows 10 it says it's not secure which from what I found out is that it's not using AES/PSK but it's a WPA2-Personal so ...
- 585
1
vote
1
answer
2k
views
Using Raspberry Pi as Wifi AP : WPA[2]-PSK works but EAP-TLS results in "IE in 3/4 msg does not match with IE in Beacon/ProbeResp"
For some testing, I'm trying to set up a WPA2-Enterprise network with EAP-TLS, and connect to it from an Android phone. I'm using a Raspberry Pi 4B running Raspbian to host the network, with its in-...
- 375
1
vote
2
answers
641
views
Do all devices in the same network have to use the same security standard (WEP/WPA/WPA2)?
If a router uses WPA2 or WPA, can a WEP-secured client connect to the network if it uses the correct username and password? In other words, does the security standard have to be consistent across ...
- 13
0
votes
0
answers
264
views
Arch Linux: Using wpa_supplicant to connect to wifi
I was in the middle of switching desktop environments, so networkmanager had just been uninstalled, everything was fine because its instance was still running in the background. But I was with a ...
- 11
0
votes
0
answers
92
views
Failed to find blob when retrieving username/password for connected WIFI with PEAP
Hi I followed this post, try to find a way to retrieve the username and password for a connected WPA2-Enterprice & PEAP protected WIFI.
I used this tool to and ran it under system privilege.
The ...
- 101
1
vote
0
answers
243
views
How do I manually connect to a WPA2 EAP-TLS school network using cloudpath on linux?
I’ve been trying to join my school’s wifi network with little success.
Our school uses Cloudpath Enrollment System (used to be called Xpressconnect or something). All devices have to install and run ...
- 11
3
votes
1
answer
3k
views
Decrypting WPA2-Enterprise (EAP-PEAP) in Wireshark
The network packets that I want to decrypt uses username and password to log in with EAP-PEAP. Not on a captive portal. Where would I put the username when decrypting network packets. I can get the ...
0
votes
1
answer
52
views
How to know what type of security a particular Wi-Fi is using, without connecting?
As we know, Wi-Fi APs can make use of different encryption schemes such as WEP, WPA, and WPA2. How can we detect this without connecting to the AP?
In other words, I want to know that what type of ...
0
votes
1
answer
476
views
Is there a way to get a AES key for a wpa2 enterprise network from a login and password for this network?
I am trying to set up a wireless repeater to repeat a WPA2 Enterprise network. I usually used a login and password for authorization but the repeater is asking for a AES key. Is there any way of ...
- 288
0
votes
1
answer
73
views
Modifying WPA2 Protocol
I have flashed OpenWRT onto my Raspberry Pi Model 3B+ and was wondering if it is possible to modify how WPA2 works for example like changing the AES encryption into my own encryption algorithm or ...
- 1
2
votes
1
answer
581
views
Can I use Kerberos for EAP without the RADIUS server getting anything but a ticket?
I would like to use Kerberos with FreeRADIUS, but I don't want FreeRADIUS to have access to any passwords (hashed or otherwise), especially because such passwords may not exist if smart card ...
- 788
0
votes
1
answer
416
views
Sequence of events for WPA and DHCP when a station connects to an AP
I'm having issues with an embedded Wi-Fi device that is set up to act as a Wi-Fi access point. I've found with the AP at elevated temperatures a device (station) attempting to connect can have some ...
- 1
1
vote
0
answers
115
views
Will my WPA2 device be able to make use of WPA3 features?
A few days ago, the Wi-Fi Alliance released WPA3, a new security standard which will replace WPA2.
My question is, will it be possible for my existing devices to make use of WPA3 features (see this ...
- 5,941
5
votes
2
answers
4k
views
ddwrt and wpa2 KRACK patch or update?
I have a ddwrt running on a TP-Link TL-WDR4300 v1.x. Build is 21061.
First question is, if the build is already the version number of the ddwrt software?
And how can I make sure that the ...
- 397
2
votes
1
answer
743
views
Unified Write Filter with WPA2-Enterprise PEAP-MSCHAPv2
hope you can help me. I can't seem to find the necessary answers.
We are developing an application which runs on top of Windows and hides the Windows UI. Therefore the user has no access to Windows. ...
- 21
1
vote
0
answers
2k
views
Connecting to WPA2-Enterprise using Powershell?
I'm writing a script to automatically install Software after system setup. But for that to work I need to have it auto-connect to a WPA2-Enterprise wifi network without user interaction. How can I do ...
- 131
0
votes
1
answer
806
views
Import WPA-EAP Wifi config from Mac OS X on Linux
We have a serviced office and the company that provides the Wifi service only gives out a unique username and password and an .EXE file for Windows users to configure the Wifi connection, which is of ...
- 1,275
1
vote
0
answers
167
views
Should a device that supports WPA2-AES be able to connect to a Mixed Mode network (WPA-TKIP, WPA2-AES)?
I'm not sure if this is the right place to ask this question, please let me know if it is not.
I have a specific question about the 802.11 security standards for WiFi.
I am using an embedded WiFi ...
1
vote
0
answers
4k
views
Trust root or leaf certificate in 802.1x setup?
I am setting up 802.1x via wired or wireless (WPA2 Enterprise) connections in our office, backed by a OneLogin RADIUS server. The certificate is not self-signed, so it's not clear to me whether it's ...
- 157
0
votes
2
answers
4k
views
Is reaver working?
I am new to Kali 2 and reaver and would appreciate it if someone with experience with could verify based on the code below whether it is working as it should be. When I input
airmon-ng start wlan0mon
...
- 101
1
vote
2
answers
8k
views
Sign into WPA2 network that requires a username from mac terminal?
I am trying to sign into my school's network through terminal. It has WPA2 security, however it requires that I put a username along with a password. Is this possible to do from terminal?
Side note: ...
- 11
0
votes
1
answer
943
views
Scapy WPA2 packet forging
Can I use scapy to forge custom packets on WPA2 network? Can I even pack the IEEE 802.11 headers? I have access to the WPA2 passphrase so will there be something stopping me from doing it?
- 159
1
vote
0
answers
3k
views
Wi-Fi WPA2-Enterprise automate connection user/password prompt on windows 8.1
I am trying to automate the connection to a known wi-fi network on our Windows 8.1. I have read everything online about netsh exporting/importing profiles. Problem is after importing the profile for ...
- 11
1
vote
1
answer
198
views
Is there any way to configure wireless settings for all access points in the network?
I have a fairly large house, with a main router (Asus) that handles the internet connection as well as DHCP, firewall, etc. This router is connected to an ethernet switch, which is connected to ...
- 368
11
votes
4
answers
16k
views
What does WPA/WPA2 really encrypt?
I have WPA2-personal on my laptop and I'm connected wirelessly to my home AP. The traffic I capture from Wireshark is all unencrypted.
Some days ago I had my router on WPA-personal and did a MITM ...
- 318
9
votes
2
answers
4k
views
WPA vs. WPA2: Exception for one device?
My home network uses a Verizon-branded Actiontec M1424WR router with Wi-Fi. My main computer is hard-wired and lacks Wi-Fi capability. I'm trying to connect an old Palm TX, which has Wi-Fi, via the ...
- 27k
4
votes
1
answer
9k
views
Password requirements for Wi-Fi WPA2
Wikipedia says:
Also referred to as WPA-PSK (pre-shared key) mode, this is designed for home and small office networks and doesn't require an authentication server.[9] Each wireless network device ...
- 41
5
votes
1
answer
4k
views
netsh hostednetwork disable WPA2 encryption (open network)
Internet connection sharing in windows is nice and easy using Virtual Wifi Mini-Port Adapters and the netsh command:
netsh wlan set hostednetwork mode=allow ssid=<mySSID> key=<password>
...
- 51
1
vote
0
answers
44
views
WPA2-Enterprise won't work with Win8.1 Client?
I'm the administrator of a relatively small wireless network, with unmanaged, BYOD devices that connect via WPA2-Enterprise (PEAP/MSCHAP authentication), controlled by a cloud RADIUS server. Yes, I ...
- 11
2
votes
1
answer
310
views
Is using an open public wifi network more insecure than using a password protected public wifi network?
I'm at a coffee shop and it is offering Google wifi for free. It does not have a password to authenticate. Is this network insecure?
More technically, does a wifi network with WPA/WPA2 password ...
- 2,054
6
votes
3
answers
31k
views
DHCP failure when rebooting RPI 2
When we start up my Raspberry pi 2, we get the following error:
When the RPI is rebooted, we are getting an IP and we are able to surf on the internet, so we don't know what the error exactly means.
...
- 163
12
votes
2
answers
36k
views
How can I find Protected EAP credentials of a wireless network stored on Windows 7?
I need to remember the authentication credentials (username/password) of the wireless network on which I am connected. There is a way to reveal those informations on Windows 7?
The wireless network ...
- 233
0
votes
1
answer
728
views
WPA/WPA2 kali linux
I have recently started to use kali linux wanting to know more about testing. I started out using it for WPA/WPA2 cracking test. I tried to attain WPA handshake but no matter how many times I do
...
- 9
-1
votes
1
answer
9k
views
How to setup GPU to crack WPA or WPA2 faster using pyrit in kali linux
I have a Dell M5040 notebook which comes with
AMD Dual-Core E-450 64-bit Processor(1.65 GHz) with AMD Radeon HD 6320 Graphics
4 GB RAM
500 GB HDD
I want to use it for cracking my home wifi ...
- 1
4
votes
1
answer
24k
views
airodump-ng doesn't see associated machines
Here is the process and results. I am not sure why this isn't working when a few day's ago it was. This is my network, I have full control over it and all the machines on it.
//Step 1 get wlan0 in ...
- 180
0
votes
3
answers
17k
views
Cracking WPA2 using Intel HD Graphics GPU
I use Linux Kali and yesterday have captured a WPA handshake of my network. I want to crack it's password - but my CPU with aircrack-ng checks only about 2000 keys per second. In my laptop I have got ...
- 103
3
votes
1
answer
8k
views
OpenWRT WPA2-Enterprise & RADIUS - config is not applied
i'm currently using OpenWrt Backfire 10.03 on an Asus WL-500G Premium v1.
Scenario is like that: AP should connect to a RADIUS server via wired ethernet and perform authentication requests.
I'm ...
- 61
20
votes
3
answers
49k
views
What does the RADIUS server do in a WPA2 Enterprise setup?
I'd like to upgrade my WiFi from "WPA2 Personal" to "WPA2 Enterprise" mode because I know that in principle, on a WiFi secured with "WPA2 Personal", devices who know the PSK can sniff on each other's ...
- 455
0
votes
1
answer
3k
views
In the context of using RADIUS for WPA2 enterprise, what does a "client certificate" mean, if anything?
I'm trying to set up a RADIUS server for WPA2 enterprise authentication. I'm new to all this. I understand that the server has a "server certificate", which I assume plays a role similar to that ...
- 375
2
votes
1
answer
2k
views
Issues connecting to WPA2 with User Authentication Mavericks?
I was on all the builds of the Mavericks beta and connecting to my University's network was fine. Then I upgraded to the public release and now I can't seem to connect to the internet. I can connect ...
- 123
0
votes
1
answer
428
views
NetworkManager and keyfile to connect to WPA2 Entreprise
How can I use NetworkManager with keyfile to configure a Wi-Fi connection in WPA2-Entreprise?
- 64
3
votes
1
answer
4k
views
Wireshark doesn't capture 802.11 data packets
Lately I have been trying to analyze wifi traffic over my own test router. I looked on the wireshark website on how to do this and setup my own testing network.
my network:
dd-wrt router with WPA2 ...
user242329
0
votes
1
answer
2k
views
Vmware 9 bridged wireless adapter with WAP2?
I've been trying to figure out how to setup my guests so they can bridge with my wireless card and use WPA2. I currently have it setup so that Vnet0 is set to use just the wireless card and Vnet1 ...
- 143
0
votes
3
answers
4k
views
WPA2 wifi access works in Mac but not windows
I have a macbook with windows installed in bootcamp. When I'm at the office, I can connect to our WPA2 enterprise wifi very easily in Mac osx, but windows can't. I suppose it has something to do with ...
- 13
1
vote
3
answers
14k
views
Ubuntu 12.04 suddenly cannot connect to WPA2/WPA Personal protected connection. Windows 7 can
I have a laptop with Windows 7 and Ubuntu 12.04. I have a Cisco E1200 and when I set it up, it created 2 SSIDs. Let's name them:
MyConnection (WPA/WPA2 personal), and
MyConnection-Guest (no ...
- 413